Proceedings of the International Conference on Advanced Materials, Manufacturing and Sustainable Development (ICAMMSD 2024)

<Previous Article In Volume
Next Article In Volume>

CFD Investigation on Horizontal Tube with Different Inserts

Authors
K. Poli Reddy1, *, B. Sreenivasa Reddy1, G. S. Guru Dattatreya1, K. Krishna Reddy1, R. Meenakshi Reddy1, G. Venkatesh1
1G. Pulla Reddy Engineering College, Kurnool, India
*Corresponding author. Email: polireddyk.me@gprec.ac.in
Corresponding Author
K. Poli Reddy
Available Online 17 March 2025.
DOI
10.2991/978-94-6463-662-8_52How to use a DOI?
Keywords
CFD; Tube Inserts and Heat Transfer Enhancement
Abstract

Increased heat transfer rates in industrial heat exchangers are the subject of ongoing research. The heat transfer augmented by passive technique and active technique especially at intermediate Reynolds numbers in pipe flow. Passive procedures include inserting various sorts of inserts into tubes. Active approaches, such as power work, that utilize external power input are less desired. The primary goal of this research work is to investigate heat transfer from a turbulent flow to a horizontal tube utilizing various inserts. Reynolds number is maintained as 12000. The two fluids namely water, 95 percent of water + 5% of Titanium Carbide. The three various sorts of inserts were considered as twisted, perforated twisted and double counter twisted tape. CFD analysis was conducted with the help of FLUENT data to determine friction factor and Nusselt number. Pro/Engineer is used to create three-dimensional horizontal tube with inserts.

Copyright
© 2025 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the International Conference on Advanced Materials, Manufacturing and Sustainable Development (ICAMMSD 2024)
Series
Advances in Engineering Research
Publication Date
17 March 2025
ISBN
978-94-6463-662-8
ISSN
2352-5401
DOI
10.2991/978-94-6463-662-8_52How to use a DOI?
Copyright
© 2025 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - K. Poli Reddy
AU  - B. Sreenivasa Reddy
AU  - G. S. Guru Dattatreya
AU  - K. Krishna Reddy
AU  - R. Meenakshi Reddy
AU  - G. Venkatesh
PY  - 2025
DA  - 2025/03/17
TI  - CFD Investigation on Horizontal Tube with Different Inserts
BT  - Proceedings of the International Conference on Advanced Materials, Manufacturing and Sustainable Development (ICAMMSD 2024)
PB  - Atlantis Press
SP  - 676
EP  - 687
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-662-8_52
DO  - 10.2991/978-94-6463-662-8_52
ID  - Reddy2025
ER  -