Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)

<Previous Article In Volume
Next Article In Volume>

Correction to: Effect of Heat Input on the Tensile Strength and Hardness of Weld Metal Using ER410H as Filler Metal Without Heat Treatment

Authors
Usman Usman1, *, Syukran Syukran1, Azwinur Azwinur1, Teuku Rachmad Saputra1
1Mechanical Engineering Department, Politeknik Negeri Lhokseumawe, Lhokseumawe, Aceh, Indonesia
*Corresponding author.
Corresponding Author
Usman Usman
Available Online 4 September 2025.
DOI
10.2991/978-94-6463-364-1_112How to use a DOI?
Copyright
© 2025 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)
Series
Advances in Engineering Research
Publication Date
4 September 2025
ISBN
978-94-6463-364-1
ISSN
2352-5401
DOI
10.2991/978-94-6463-364-1_112How to use a DOI?
Copyright
© 2025 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Usman Usman
AU  - Syukran Syukran
AU  - Azwinur Azwinur
AU  - Teuku Rachmad Saputra
PY  - 2025
DA  - 2025/09/04
TI  - Correction to: Effect of Heat Input on the Tensile Strength and Hardness of Weld Metal Using ER410H as Filler Metal Without Heat Treatment
BT  - Proceedings of the International Conference on Applied Science and Technology on Engineering Science 2023 (iCAST-ES 2023)
PB  - Atlantis Press
SP  - C1
EP  - C1
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-364-1_112
DO  - 10.2991/978-94-6463-364-1_112
ID  - Usman2025
ER  -