Advances in Engineering Research

In order to improve the utilization of solar energy and to reduce the energy consumption of an auxiliary heat source, this study investigates a phase change heat storage device for an LPG vaporization system utilizing solar assisted heat pump (DX-SAHPV). In this study, paraffin was chosen as the phase...

The performance of finger seal as an important component has decisive influence on performance of aeroengine. The complicated operating state of aeroengine, such as assembly condition, also has important influence on finger seal performance. However, equivalent dynamic model has not considered this factor,...

The hydrogel is a three-dimensional reticular polymer with high water content, which was used in various fields such as medicine, biology and environmental protection. However, the characteristic of lower mechanical properties limited its application. Therefore, the improvement of the mechanical strength...

In this paper, a unified viscoplastic model was utilised to numerically simulate cyclic hardening of a nimonic alloy 75 under multiaxial non-proportional cyclic straining at elevated temperature. Description of the constitutive model and interpretation of material parameter were also presented. Constitutive...

Since the computation ability of computer improves dramatically, a lot of new meta-heuristic methods arise. All those algorithms are originated from some mechanisms in nature, and are similar in structure and widely used to solve global optimization problems. However, evolutionary algorithm, such as...

Using computer to make face model, establish facial expression animation and exaggerate facial image processing is a hot research topic in the current, which technology has a broad application prospect and huge economic benefits. For example, remote teaching, film and television entertainment, video...

This article mainly used Fourier series type SPWM inverter output voltage waveform for the quantitative harmonic analysis. This paper expounds the main reason for the harmonic of the inverter. In this paper, the quantitative harmonic analysis method to eliminate the harmonic pollution green grid provides...

For the traditional enterprise sustainable development of technological capabilities, the main research of domestic scholars is to use the high-tech to improve the technology, scholars take coal, textile, automobile, petrochemical and other traditional enterprises as an example, to explore the process...

Pyromellitic dianhydride (PMDA) was prepared by an alkali oxygen oxidation of anthracite and selectively decarboxylation of pyromellitic acid (PA). Tetraoctyl Pyromellitate (TOPM) was synthesized by the esterification of PMDA with isooctyl alcohol. The influence of temperature and time on the yield of...

Six group of axial compression tests of sandstone were conducted in laboratory, and the infrasound signals of each test process were recorded synchronously then the time-frequency characteristics of all signals have been analyzed to find the failure precursor information, the results show that: The infrasound...

Based on the connotation of pollution footprint and the index model of water pollution which guided by ecological footprint theory, the water pollution footprint of Jiangxi province from 2004 to 2015 was calculated according to the survey of water pollutant emission statistics. Temporal dynamics and...

Based on finite element analysis, natural convection heat transfer and other theory, we established finite element model of optical feedthrough and we got the natural convection coefficient of air at 140 . Through the study of thermal analysis of fiber feedthrough, we got the temperature field distribution...

This paper used the methods like literature data method to analyze the present situation of university sports information management, expound college PE informationization goal, and use UML to conduct university sports information management system function analysis and design from the perspective of...

Timoshenko beam with variable section is widely used for the sake of good mechanical behavior and economic benefit. In order to improve analytical accuracy, stiffness matrix of Timoshenko beam element with arbitrary section was founded. According to the relationship between geometrical deformation and...

With the development of society, science and technology in agriculture has gained more and more attention. The paper aims at sunlight greenhouse to design an automatic circulating temperature control system based on SCM--STC15F2K32S2. The system collects the greenhouse temperature passing to the SCM...

To obtain a good Cherry preservative, the author prepared mercapto Chitosan and metal ion complexes with solid-liquid reaction. Besides, the Cherry preservative was prepared by modified Chitosan materials. It was obtained that the optimal concentration of chitosen acetate for fresh cherries is 10g/l...

Considering the immnuoisolation from the neural stem cells (NSCs) and endothelial progenitor cells (EPCs), the requirements of the carrier, shear tolerance and other factors, this study designed an immunoisolation perfusion co-culture bioreactor system, by dynamic perfusion culture environment of its...

Order beauty is the core of graphic design, with its good works follow the rules of th11e performance of the order (such as symmetry, golden section, etc.) consciously or unconsciously. In graphic design, these rules reflect the basic principles for the design geometry whose proper use can make the design...

Tetra-(hydroxypheny-hexfluoropropyl) zinc(II) phthalocyanine was synthesized and its structure was characterized by elemental analysis, IR, MALDI-TOF mass, and 1HNMR methods. Its photophysical properties was measured by UV/Vis, steady-state, and time-resolved fluorescence spectroscopy. The bulky fluorinated...

To solve the traditional problem that the situation in mine is unknown in time, a kind of wireless monitor system based on ZigBee technology is designed. In this system, the security manager can real-time monitor the gas density of multi-location .Compared with traditional system, this system is portable...

In software product development process, software usability testing is essential and must be carried out in the actual work tasks and operating environment of the user. Expand the availability of this article assessment of software testing based on analytic hierarchy process (AHP), it qualitative and...

The combustion characteristics of corn stalk and coal gangue mixture (1:4, 2:3, 3:2,4:1) were studied by thermogravimetric analysis. By the data analysis to obtain its combustion characteristics peak fire index, index volatile, flammable index, comprehensive characteristic index and other characteristic...

A new dipping basalt fiber reinforced concrete (DBF-RC) was developed in this study. The surface of fiber was modified by dipping into epoxy resin. The mix of DBF was first researched on cement mortar, and then on concrete. The workability and mechanical properties of cementitious materials were investigated....

With an area of more than forty thousands square kilometers, rich geological reserves have been proved in Sulige gas field and thousands of gas wells have been constructed there. It is a high cost to open or shut in so many wells manually and labour intensity is great for workers. To meet the requirements...

The mechanical model analysis of the rigid joint of the key beam column connection of the portal frame of the industrial building is given in this paper.The structure form of joint has great influence on the stress state of high strength bolt connection.The calculation model of bolt is matched according...

In recent years, the growth rate of wind power in China installed capacity has tended to be stable, and the competition among wind power equipment manufacturers has become increasingly fierce. In order to analyze the industrial performance of wind power in China, the paper summarized the status quo of...

For staff, environment, equipment and management the four aspects, the early warning index system of coal mine safety production adopts the additional momentum method and adaptive vector, particle swarm optimization (PSO) algorithm and the method of variable weight and asynchronous learning factor and...

Evolution of adiabatic shear bands in zirconium alloy under dynamic deformation was investigated by means of split Hopkinson pressure bar impacted at different strains and strain rates. The results show that adiabatic shear bands were the main plastic deformation mechanism of zirconium alloy subjected...

Test method for observation of geotechnical material in structural damage has become one of the hot field of mechanics, which is the basis to establish the structural model. The authors use real time CT test of triaxial stress in undisturbed loess during triaxial shear tests - strain were studied. The...

In order to investigate mechanic behaviors of the orthotropic deck welding conformation details of highway steel bridge, take Zhongdu Yangtze River Bridge located in Jiangjin of Chongqing district as an engineering background, the 3-dimension spatial section model of steel box girder was firstly established...

For high-precision position servo system has run repeatedly on the properties of iterative learning control (iterative learning control, ILC), you can get totally theoretical position on track. But in fact, many of the servo drive usually consists of commercial products, and these products can not be...

Transformer substation operation process should first ensure the running safety. Job skill of substation operation staff is one of the important factors to make sure the safe operation of power system reliability. Therefore, the attendant must pass professional training to mount guard operation. Traditional...

To verify the fatigue life of a hybrid bus frame, the finite element model of the frame is built, and the equivalent stress distribution of the frame was got. Multi-body dynamics vehicle model was built in ADAMS/Car. The simulation analysis was conducted based on the road spectrum compiled by MATLAB...

In recent years, aluminum enrichment in soils is exacerbated. The amount of aluminum exchange in acidic soils directly affects the level of soil acidification. Aluminum toxicity-neutralizing capabilities of the microorganisms that have survived under the aluminum toxicity selection determine the harmfulness...

Multimedia animation demonstration, as a broad market development prospect and important application field of Flash animation, has a very important significance and value in the field of education teaching. Combining high school knowledge, this paper gives a detailed overview of AS3.0 features in Flash...

As a major branch of environmental audit, environmental performance audit occupies an important position in the environmental management system.At present, the environmental problem is becoming more and more serious.Can you find a way to the sustainable development has a relationship with the whole nation's...

In order to enlarge the application scope of the existing criteria for the heat transfer deterioration, the criteria of heat transfer deterioration was assessed by using the method of mechanism analysis and experimental data available in the literature. The obtained results indicated that the criteria...

On the basis of Ce (IV) and rhodamine B obvious light signal under the acid medium, the Ce(IV)-rhaodamine B-H2SO4 hemiluminescence system was established. In this paper, the ciprofloxacin hydrodchloride under the concentration of less than 1.0 ×10 -5 g/mL was explored, and a new determination of ciprofloxacin...

Along with the social civilization progress and the development of advanced science and technology, automatic vending machines are widely used in bus station, shopping malls, hospitals, communities, schools and other public places, which brings great convenience to people's travel and life, such as all...

At the beginning of the 21st century, the trend of provincial industrial transfer became more evident. The transfer of industry will have a degree of impact on the economy and environment of the transfer-in-land and transfer-out-land. This paper uses the data of 10 polluting industries and 30 provinces...

In this paper, By the use of a new fixed point theorem and the nonlocal BVP Green function. The existence of at least one positive solutions for the nonlocal fourth-order boundary value problem with the first order derivative

Based upon existing instruments have some disadvantages in both ways, one hand is simple structure, single function ,not work, difficult to cut, cannot cut completely or unsafe issues;on the other hand is complex structure, equipped with gear-down mechanism ,high manufacturing cost, bad price/ performance...

This paper analyzes the different demands for construction operating platforms in main structure construction and external decoration. A novel multilevel climbing operating platform applied in main structure construction and external decoration is presented. In addition, an external-wall climbing working...

When Calculating the parameter c of differential equations,traditional GM(1,1) model considers only the of 1-AGO,the oldest history data ,resulting loss of new information to some extent.This paper gives a new way to calculate the initial value.The new model firstly establishes the function of residual...

In order to solve the problem that conventional single IPC tester exists a universal machine a difficult test, a large space and other issues, the researchers designed a new fuse covers a variety of common tester, according to several types of fuses and general target test tester itself different actual...

The cloud manufacturing (CMfg) is a new manufacturing paradigm that can realize the added-value and on-demand use of manufacturing resource and ability in the form of manufacturing cloud service (CS). In order to realize the added-value of cloud service (CS) through cloud service composition (CSC) in...

In the process of smelting metal will produce a lot of environmental pollution by gas and waste residue,here for metallurgical raw materials and direct or indirect relationship between the environment for analysis.

In the production and quality management of enterprises, the management of equipment should also be attached great importance, at present, there are many advanced theories in the world.. This paper focuses on the total productive maintenance (TPM), in the TPM can quantify the overall equipment effectiveness...

This paper aims to implement the Arlequin method to simulate the bearing failure in composite bolted joints. Arlequin coupling elements are established by introducing Lagrange multipliers to couple the 3D coarse elements and 3D refined elements. Refined elements are meshed one element each ply the same...

The harmonic components is the additional waveform in the power grid, the harmonic loss can directly reflect the quality of the power grid, the harm of harmonic influences to the power grid and the safety of the equipment, in this paper it will be introduced a new type of harmonic suppression measures,...

Automation control and other consumer devices, industrial control and other fields, external communication interface many devices is still low speed serial port, but the low-speed serial inherent disadvantages: inability to concentrate, comprehensive, accurate and real-time monitoring data, which requires...

Introduces the dry process dusting system of converter process flow, equipment composition and function. Practice showed that the dry dust removal system stable running, high efficiency of dust collection, after purification of flue gas dust content is low, operation maintenance cost is low.

With the large-scale development of China’s wind power industry recently, wind power connected to grid has great impacts on power system network FM (frequency modulation). Researching on pricing mechanism of AGC ancillary service is essential for the stability and economy of ancillary services markets...

Oxidized coal is the coal that recovered to environment temperature when the heat-storing environment is destroyed during the self-heating process, which is quite common in the process of coal mining and utilization. The spontaneous combustibility of oxidized coal differs from that of raw coal, which...

The compound powders of VB2 with 25 wt% and 50 wt% Ni were mixed uniformly using a planetary ball miller, respectively. The discharge capacity of VB2/air battery with VB2-Ni as anode in KOH electrolyte was investigated at room temperature and ambient pressure. Meanwhile, the microstructure of VB2-Ni...

Oxygen enriched combustion technology is an important branch of greenhouse gas emission reduction technology, which has been developed rapidly in recent years. This paper briefly introduces the method of oxygen enriched combustion and the energy saving characteristics and the influence of the environment...

Biogas is deemed as a kind of superior and renewable resource. It is urgent for Supervisory Departments to adopt a real-time monitoring system which may process data promptly so as to reduce the potential danger and improve the level of automation. In this paper, an intelligent biogas digester monitoring...

In recent years, the Chinese iron and steel enterprise energy resources conservation technology progress and key generic technology development and application, including CDQ technology, coal moisture control technology, sintering waste heat recovery and utilization, blast furnace top gas residual pressure...

With the rapid development of urbanization, the contradiction between human activities and ecological environment is becoming more and more serious, and the urban park green space is unable to meet the demands of people for the urban environment. Based on the theory of sponge city, the ecological design...

That wind power provides automatic generation control (AGC) is an innovative solution to the lack of AGC ancillary services and the problem of abandoned wind. How to appropriately compensate the wind power generators who provide AGC ancillary services is a critical issue. Based on the day-ahead market...

In this paper, we examine the dynamic anti-plane behavior of interacting redial cracks emanating from the edges of two interfacial circular cavities in piezoelectric bimaterials under incident anti-plane shearing wave (SH-wave). Green’s functions for a semi-infinite piezoelectric medium with two circular...

This paper describes the overview of foreign and domestic garbage garbage power generation profile, and then were introduced three ways trash generation, namely landfill gas power generation, waste incineration power generation and waste gasification power, then this paper describes a comprehensive benefits...

The preparation and characterization of anti - blocked composite material consisting of MgSO4·7H2O and KAl(SO4)2·12H2O for thermal energy storage are reported in the present article. The preparation is performed by co-melting method by adding CaCO3 as the anti-blocking agent. The thermal properties of...

With the rapid development of social economy, Science and technology level are increasingly improving, especially accelerated pace of life, People demand for fireproof, anti-theft and anti-gas equipment is greatly increased, and for theft, fire and other accident monitoring and alarm system requirements...

With the rapid development of wind power, the conventional power auxiliary services have not met the requirements of wind power grid-connected power generation in full. In order to relieve the grid-connected and integration issues of wind power, wind power was put forward to participate in ancillary...

Simulation of Micro Blanking Process of Square Hole with Fillet was carried out based on DEFORM-3D. The ratio of burnish depth, shear depth and fracture depth to sheet thickness under different relative blanking clearance (c/t) was analyzed. The results show that the burnish depth at the fillet increases...

Because wind energy is very rich, the price is very cheap, energy will not be exhausted, and can be obtained in a wide range, very clean, no pollution, will not affect the climate, so wind power has been the world's fastest growing energy. This paper summarizes and tracks the main forecasting techniques...

How to develop high-efficient and low-cost electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is urgent in fuel cell and metal-air batteries. What we are going to introduce is how to improve the performance of catalyst for ORR and OER under different acid treatment...

Urban traffic is a real-time change, so the traditional serial algorithm cannot satisfy the requirement of traffic scale and condition changes. Therefore, this paper proposes a improved non-dominated sorting genetic algorithm for route optimization problem of multi-objects. Firstly, through the analysis...

A new stretch forming process based on distributed displacement loading for three-dimensional surface parts is proposed, the external stretching displacement load is applied at a series of discrete points, so the flexibility of the loading mechanism is improved. The forming process can be realized by...

To solve the problem of adjacent order overlap for variable speed bearings, a novel method with the fixed-point independent component analysis (ICA) and peak detection is proposed. Firstly, the mixed vibration signal is whitened by through of the singular value decomposition. Then it introduces fixed-point...

For manufacturing enterprises, effective inventory management strategies can speed up the funds flow and reduce some unnecessary cost. In this paper, by researching the current inventory management status of an energy company and on the basics of widely reading the literature about inventory management...

Thin films of FeCoB-O were deposited by reactive magnetron sputtering in a Ar + O2 atmosphere with the oxygen partial pressure RO2 varied. The dependence of soft magnetic properties and high frequency characteristics on oxygen partial pressure were investigated systematically. With the increase in RO2...

This project discussed environment and economic situation including regulation, deployment and Financing of building solar plant in Chile, which provided flexibility for further project construction.

According to prediction of landslide based on grey vector machine model, the landslide is affected by multiple factors such as soil layer structure and these factors show complicated non-linear relation with landslide, while it is hard for the traditional model to reflect the non-linear complicated relation....

In view of the phenomenon that defects such as fracture, wrinkling and springback may generate when box shaped parts are stamped, however better surface quality on parts have been required. The process of drawing, cutting and springback for magnet covers with arc top and straight sidewall are simulated...

With the unceasing development of national economy and science and technology, wireless data transmission is extensive used in many areas, basing on its characteristic of flexible and so on. Based on the SMS of GSM net, this article introduce an intelligentized surveillance system which is used for controlling...

This paper summarizes the relevant policy documents of Guangzhou contract energy management, analyzes the status of energy-saving service companies and the implementation of contract energy projects in Guangzhou in recent years. According to the current situation of the implementation of contract energy...

The detection of partial discharge and analysis of sulfur hexafluoride (SF6) purity in gas-insulated switchgears (GIS) is important for diagnosis and operating state assessment of the electric device. This paper introduced a method for rapid purity detection of SF6 based on one-way ion mobility spectrometry....

The important influence of thermodynamic effect inside bubble and viscous liquid volume outside the bubble on the dynamics of bubble can be found. However, the combined effect of those two factors has currently little research and the thermodynamic effect of the bubble can be seen from the Flynn model....

In this paper, we propose complex projective synchronization method to realize synchronization of two chaotic complex systems with disturbance. Base on the theory of the Lyapunov stability, we design adaptive feedback controller to realize complex projective synchronization of master-slave chaotic complex...

SUV (Sport UtilityVehicle, SUV) HCG (Height of Center Gravity) is higher, relatively low rollover stability, higher rollover accident rate has become an important issue for cars safety. In this paper, Firstly, four-DOF kinematics theoretical vehicle model was established then combined with a SUV development...

The preparation process of waste banana stem adsorbent and the conditions of removing Cr were studied. The experiment results showed that the saturated adsorption capacity of banana stem adsorbent with phosphoric acid reached 5.84mg/g, over 95% of Cr(VI) and 70% of total Cr can be removed from water...

The backup rolls are used with work rolls and their service period is much longer than work rolls. The backup roll affects the control ability of the mill for profile and flatness of products and roll contact pressure. If the backup roll contour is not appropriate, there will be a non-uniform roll contact...

Aiming at the multi-sensor multi-target assignment (MSMTA) problem under complex air defense combat environment, a new MSMTA model is proposed with the compositive combat efficiency of the identification, tracking and positioning stage. And then, the quantum particle swarm optimization (QPSQ) algorithm...

The braking performance is one of the most important active safety performances of vehicle, which plays a key role in the traffic safety. It is necessary to research on braking efficiency and it becomes a hotspot to express the braking performance scientifically and rationally. To improve braking capability...

This paper applies box-counting model to study the fractal characteristics of 17 sub-watersheds in the study area from Badong county to Zigui county in TGP reservoir region. The results indicate that the small watersheds have obvious fractal characteristics and that fractal dimension values of sub-watersheds...

This paper summarizes three kinds of improved strategies for ant colony optimization algorithm: the improved strategy based on the structure of solution, the improved strategy based on the pheromone updating, and the improved method based on the solution processing. Taking the ant colony system as an...

The report of the 17th National Congress of CPC will take the "people first" as the core of scientific development concept. With the upgrading of science and technology and the progress of medical science, the "people first" shall be more required by medical science. As future medical workers, we shall...

According to the test results of the composition material of the all-lightweight aggregate concrete,design the mix proportion of the all-lightweight aggregate concrete of LC30 and LC35 levels,and make the compressive strength test, the splitting tensile test and the elasticity modulus test,analyze the...

In this paper,industrial grade chitosan as the raw materials,HAc-H2O2 synergistic oxidative degradation method was used for degradation of raw materials,the influences in the reaction process with different chitosan dosage on the yield,the viscosity and the degree of deacetylation had been studied systematically.The...

In this paper, the ant colony algorithms is studied, and improve the shortcomings of the algorithm, And the improved algorithm is introduced into the field of logistics transportation. Aiming at the complexity and uncertainty of logistics transportation vehicle scheduling problem, a new algorithm is...

To monitor the equipment condition changes, a warning method based on MEP (Maximum Entropy Principle) is proposed. First, the data is normalized and the data objects are divided into K clusters by K-means clustering algorithm. Second, the parameters are calculated and its probability density function...

Node positioning system can quickly determine the position of the multiple nodes. On how to improve the performance of multiple nodes localization, multiple nodes localization algorithm based on integration of subframe estimation and cluster analysis is proposed. First, a signal is divided into 8 subframes....

This paper designs a new type of wind-wave complementary device, and introduces the detailed design about a few key part of the device. The principle of the device adopts the wind-wave complementary system ,which collect the wave energy and wind energy respectively. Moreover, to increase the generating...

In this paper, we present a path planning for mobile robot based on improved ant colony optimization algorithm. In order to increasing the algorithm’s convergence speed and avoiding to fall into local optimum, we proposed updating the pheromone residues. Experiments show that this method is effective...

Six solid media, including rice hull, sawdust, wood chips, plastic pellet, coir and perlite, mixed with peat were used for blueberry 'Sharpblue' soilless culture. We determined the plant growth and development to estimate the optimal solid medium for blueberry soilless culture.

In this paper, we measure performance of automobile manufacturing industry by a new hybrid model based on bi-objective super-efficiency DEA. We propose super-efficiency DEA theory to improve conventional DEA with non-Archimedean infinitesimal, and then we take bi-objective issue into consideration to...

This article applies Co-S3OM semi-supervised learning algorithm to intrusion detection field and proposes specific semi-supervised network intrusion classification scheme. In accordance with different type of attack, different mark samples are selected as training set to complete initialization of three...

In this work, the effects of cooling rate on the microstructure and tensile strength of A356 wheels during solidification were studied. Four cooling methods, including air cooling, wind cooling and two different water coolings, were a used to control the cooling rate of spoke. Comparing with the air...