Comparative Study on Rock Breaking Performance of Flat-Top Rolling Cutters and Toothed Rolling Cutters Based on Numerical Simulation
- DOI
- 10.2991/978-94-6463-658-1_22How to use a DOI?
- Keywords
- Gear hobbing cutters; Rock breaking; Excavation parameters; Numerical simulation
- Abstract
Shield tunneling machines are powerful tools for underground transportation construction, but working in hard rock environments can exacerbate the wear and tear of their rolling cutters. In recent years, the rock-breaking performance of toothed rolling cutters has gradually attracted attention. This article conducts numerical simulation research on the rock-breaking process of flat-top rolling cutters and toothed rolling cutters, and compares the effects of hob width and penetration on their rock-breaking performance. The results show that with the continuous increase of width and penetration, the rock-breaking efficiency of the toothed hob and the flat-top hob continues to improve. When the width of the hob is small, the toothed hob has smaller wear and higher rock breaking performance. When the width of the hob is large, the difference in rock breaking performance between the toothed hob and the flat-top hob is not significant. The study on the rock-breaking performance of flat-top rolling cutters and toothed rolling cutters under different excavation parameters has important guiding significance for the selection and improvement of rolling cutters for shield tunneling machines in underground engineering.
- Copyright
- © 2025 The Author(s)
- Open Access
- Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.
Cite this article
TY - CONF AU - Yu Li AU - Taotao Wu AU - Qing Zhang AU - Jian Zhang PY - 2025 DA - 2025/03/03 TI - Comparative Study on Rock Breaking Performance of Flat-Top Rolling Cutters and Toothed Rolling Cutters Based on Numerical Simulation BT - Proceedings of the 2024 10th International Conference on Architectural, Civil and Hydraulic Engineering (ICACHE 2024) PB - Atlantis Press SP - 223 EP - 229 SN - 2352-5401 UR - https://doi.org/10.2991/978-94-6463-658-1_22 DO - 10.2991/978-94-6463-658-1_22 ID - Li2025 ER -