Proceedings of the 7th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2024)

<Previous Article In Volume
Next Article In Volume>

Research and application of the influence of workbench stiffness on the quality of integral door ring hot stamping forming in mechanical servo hot stamping press

Authors
Quanquan Qi1, Zunmang Ke1, *, Zhongwei Ren1, Quanbao Feng1
1Ningbo Jinda Forming Equipment Co., Ltd., Ningbo, 315000, China
*Corresponding author. Email: Kzm66@qq.com
Corresponding Author
Zunmang Ke
Available Online 7 December 2024.
DOI
10.2991/978-94-6463-581-2_60How to use a DOI?
Keywords
Mechanical servo press; Integral door ring; Ultra-high-strength steel; Stiffness improvement; Workbench optimization design
Abstract

This paper investigates the impact of workbench stiffness on the quality of integral door ring hot stamping forming in a mechanical servo hot stamping press and proposes a compensation control technology. The paper begins by introducing the current status and development trend of ultra-high-strength steel hot forming and the advantages and challenges of integral door rings. The deformation problem of workbench stiffness in hot stamping press is analyzed, and solutions for improving stiffness are proposed. By optimizing the design of the base structure and implementing hydraulic cylinder compensation technology, the stiffness of the press workbench is enhanced, and deformation is controlled. Experimental validation of the optimization scheme demonstrates improved consistency in door ring hot stamping forming quality and production efficiency.

Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 7th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2024)
Series
Atlantis Highlights in Material Sciences and Technology
Publication Date
7 December 2024
ISBN
978-94-6463-581-2
ISSN
2590-3217
DOI
10.2991/978-94-6463-581-2_60How to use a DOI?
Copyright
© 2024 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Quanquan Qi
AU  - Zunmang Ke
AU  - Zhongwei Ren
AU  - Quanbao Feng
PY  - 2024
DA  - 2024/12/07
TI  - Research and application of the influence of workbench stiffness on the quality of integral door ring hot stamping forming in mechanical servo hot stamping press
BT  - Proceedings of the 7th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2024)
PB  - Atlantis Press
SP  - 509
EP  - 516
SN  - 2590-3217
UR  - https://doi.org/10.2991/978-94-6463-581-2_60
DO  - 10.2991/978-94-6463-581-2_60
ID  - Qi2024
ER  -