Proceedings of the 7th International Conference on Advanced High Strength Steel and Press Hardening (ICHSU 2024)
400 authors
- Ai, Jian
- Analysis of forming process for hot stamping fuel tank bracket of commercial vehicles
- Alejos, Oscar
- Monitored gas springs
- Alonso, Gerardo
- Monitored gas springs
- Bai, Ying
- Effect of temperature on the friction and wear of Zn-based coatings on ultra-high strength steel
- Bi, Yunjie
- Study on the microstructure and performance of laser cladding-rollinging compaction hybrid forming for 15-5PH stainless steel
- Cai, Minghui
- Influence of Ti-Mo addition on the hydrogen embrittlement resistance of Fe-5.6Mn-0.16C-1Al steel
- Cai, Minghui
- Study on the microstructure and performance of laser cladding-rollinging compaction hybrid forming for 15-5PH stainless steel
- Cao, Guangming
- Research of laser tailor welding technology for zinc-based coated hot stamping steel
- Cao, Pengjun
- The effect of niobium-vanadium composite microalloying on the strength and toughness of hot press forming steel
- Cao, Weilin
- Mechanical properties and anti-corrosion properties of thin aluminum-silicon coated 2000mpa press hardening steel
- Cao, Wu
- Simulative analysis of surface accuracy control for spot welding assembly part
- Cao, Yishu
- Effect of temperature on the friction and wear of Zn-based coatings on ultra-high strength steel
- Chai, Xiaobo
- Research on hot stamping production line and digital twin system based on industry 4.0
- Chai, Xiaobo
- Research and application of hot stamping line based on digital mechanical servo presses
- Chang, Zhiyuan
- Effect of V microalloying and intercritical annealing on improving strength-ductility balance of Al-bearing medium Mn steel
- Chen, Biao
- Research and application of wireless network monitoring technology for operating parameters of nitrogen gas springs
- Chen, Bo
- Effect of deformation temperature on microstructure in coating of galvanized hot-formed steel
- Chen, Jiabei
- Study on the mechanical properties of single lap joints of carbon fiber/hot stamped high strength steel plates
- Chen, Jiayue
- Mechanical properties and anti-corrosion properties of thin aluminum-silicon coated 2000mpa press hardening steel
- Chen, Lei
- Research and application of roll forming technology of 1500MPa advanced high strength steel for automobile bumper
- Chen, Wei
- Effect of temperature on the friction and wear of Zn-based coatings on ultra-high strength steel
- Chen, Wen
- Application of coaxial superimposed hump-shaped motion planning
- Chen, Youjia
- Research and application of wireless network monitoring technology for operating parameters of nitrogen gas springs
- Cheng, Pengzhi
- An innovative process for titanium alloy package edge of aircraft engines composite fan blades
- Cheng, Weiwei
- Research on hot stamping process of tailor-welded blanks integrated door ring
- Cheng, Yu
- The effect of composite microalloying on the performance of hot press forming B-pillars
- Chu, Guannan
- Research on aluminum alloy hot stamping process using short-wave infrared heating technology
- Cui, Lei
- Surface morphology evolution of Al-Si coated press hardening steel with different coating weight
- Dan, Miyin
- Research and application of direct water cooling system for hot stamping of high strength steel automobile integrated door ring
- Deng, Jianlin
- Hot stamping process and mold design for integrated car body door rings
- Deng, Jianlin
- Process and application of hot stamping double door rings for vehicle body with multi part integrated laser tailored blank
- Deng, Jianlin
- Research and application of experimental analysis method for formability assessment of hot stamped parts with laser welded blanks
- Deng, Jun
- Research on hot stamping process of tailor-welded blanks integrated door ring
- Deng, Liang
- Feasibility study on lubrication of water-based siloxane polymer lubricant under hot forming condition of aluminum alloy
- Deng, Surui
- Research on hot stamping production line and digital twin system based on industry 4.0
- Deng, Surui
- Research and application of hot stamping line based on digital mechanical servo presses
- Deng, Xiangxing
- Research on the effect of hydrogen charging on the extreme tip bending performance of ultra high strength automotive steel plate
- Deng, Xiangxing
- Oxidation resistance mechanism of Si-Cr press hardening steel with Si and Cr alloy elements
- Deng, Zhiming
- Intelligent management of hot stamping production: dynamic job configuration based on rule engine
- Ding, Hanlin
- Study on pre-stretching - contact heating - artificial aging process of 7075 aluminum alloy
- Dong, Hongrui
- An innovative process for titanium alloy package edge of aircraft engines composite fan blades
- Dong, Xin
- Research on aluminum alloy hot stamping process using short-wave infrared heating technology
- Dong, Yikang
- Effect of deformation temperature on microstructure in coating of galvanized hot-formed steel
- Du, Yinming
- Research on hot stamping production line and digital twin system based on industry 4.0
- Du, Yinming
- Research and application of hot stamping flexible production line based on queue balance
- Fang, Dongyu
- Phase structures of hot stamping zinc coating treated by multi-step rapid heating procedure
- Fang, Dongyu
- Effect of water-based lubrication on friction behaviour of 7075 aluminium alloy sheet in hot stamping
- Fang, Dongyu
- Corrosion resistance of zinc-iron coated plates of high-tensile steel by stepwise rapid heating
- Fang, Jian
- Omega: A material parameter for quantifying fracture in sheet materials
- Feng, Anzhu
- Research and application of laser splicing welding equipment for doorings based on intelligent vision splicing system
- Feng, Quanbao
- Research and application of the influence of workbench stiffness on the quality of integral door ring hot stamping forming in mechanical servo hot stamping press
- Feng, Sule
- Research on the forming of an asymmetric cylindrical part by two-sided hydromechanical deep drawing method
- Feng, Yi
- Research on material and process optimization for hot stamping of large dimensional parts in commercial vehicles
- Feng, Yi
- Research on the corrosion resistance of micro alloyed press hardened steel with thin aluminum silicon coating
- Feng, Yingyu
- Factors affecting the failure of hot stamping molds and mold maintenance
- Gao, Jincheng
- Mechanical properties of novel heat-treatment-free aluminium alloys
- Gao, Xiang
- Research on the corrosion resistance of micro alloyed press hardened steel with thin aluminum silicon coating
- García, Ignacio
- Monitored gas springs
- Ge, Rui
- Effect of heat treatment temperature on microstructure evolution of aluminum silicon coating on hot-formed steel
- Gui, Lintao
- Research on the effect of hydrogen charging on the extreme tip bending performance of ultra high strength automotive steel plate
- Gui, Lintao
- Oxidation resistance mechanism of Si-Cr press hardening steel with Si and Cr alloy elements
- Guo, Aimin
- Research on the effect of hydrogen charging on the extreme tip bending performance of ultra high strength automotive steel plate
- Guo, Dongsheng
- Research on the thermal deformation rules of patch panels of high-strength steel body structural parts during the heating process
- Guo, Hailong
- Comparison of laser cutting technology routes for large-scale integrated hot stamping components
- Guo, Nan
- Hot stamping of ultra-thin ferritic stainless steel for microchannels
- Han, Xianhong
- The hydrogen embrittlement behavior of ultra-high-strength boron steel with different prior austenite grain sizes
- Hao, Qian
- View planning method for sheet metal parts in automated 3D measurement
- He, Jie
- Research on the corrosion resistance of micro alloyed press hardened steel with thin aluminum silicon coating
- He, Lang
- Research on hot metal gas forming characteristics of 1.5GPa ultra-high strength steel and lightweight of torsion beam
- He, Yanlin
- Effect of V microalloying and intercritical annealing on improving strength-ductility balance of Al-bearing medium Mn steel
- Hou, Deqi
- Research on aluminum alloy hot stamping process using short-wave infrared heating technology
- Hou, Zeran
- Simulation-based study of hot forming for dual door rings through LS-DYNA
- Hu, Jian
- Research and application of direct water cooling system for hot stamping of high strength steel automobile integrated door ring
- Hu, Xiaoqi
- Study on the microstructure and performance of laser cladding-rollinging compaction hybrid forming for 15-5PH stainless steel
- Hu, Xinyu
- Research on high temperature friction performance of carbon fiber composite materials
- Huang, Guangjie
- Research on material and process optimization for hot stamping of large dimensional parts in commercial vehicles
- Huang, Guangjie
- Research on the corrosion resistance of micro alloyed press hardened steel with thin aluminum silicon coating
- Huang, Qiuyue
- Effect of microstructure evolution on mechanical properties of medium-Mn steel for hot forming
- Huang, Xinlian
- Research and application of mold circulating cooling water system and energy saving technology for hot stamping production line
- Huang, Zhiyong
- Factors affecting the failure of hot stamping molds and mold maintenance
- Jiang, Hui
- Factors affecting the failure of hot stamping molds and mold maintenance
- Jiang, Jianqiang
- Simulative analysis of surface accuracy control for spot welding assembly part
- Jiao, Changjian
- Simulation technique of multi-strokes stamping with high stroke rates
- Jiao, Jingsi
- Omega: A material parameter for quantifying fracture in sheet materials
- Jing, Cainian
- Effect of microstructure evolution on mechanical properties of medium-Mn steel for hot forming
- Kang, Jian
- Effect of V microalloying and intercritical annealing on improving strength-ductility balance of Al-bearing medium Mn steel
- Ke, Zunmang
- Research and application of the influence of workbench stiffness on the quality of integral door ring hot stamping forming in mechanical servo hot stamping press
- Kohllöffel, Ralf
- Revolutionizing automotive hot forming parts manufacturing: Unleashing the potential of TRUMPF 5-Axis 3D cutting machine TruLaser Cell 8030 through automated loading and unloading
- Lai, Lihui
- Research on hot stamping and forming technology of variable strength hot stamping of high-strength steel in one mold with multiple partitions
- Li, Bo
- Static strength analysis of hot press forming fuel tank bracket based on equivalent design
- Li, Bo
- Analysis of forming process for hot stamping fuel tank bracket of commercial vehicles
- Li, Bo
- The effect of niobium-vanadium composite microalloying on the strength and toughness of hot press forming steel
- Li, Chunguang
- Research on hot metal gas forming characteristics of 1.5GPa ultra-high strength steel and lightweight of torsion beam
- Li, Erwei
- Mechanical properties and anti-corrosion properties of thin aluminum-silicon coated 2000mpa press hardening steel
- Li, Fangfang
- Temperature correction of hot stamping parts based on infrared thermal imager
- Li, Gongzheng
- Research on thermochemical erosion of conveying rollers in the roller bottom heating furnace of hot stamping production line
- Li, Jingwei
- Static strength analysis of hot press forming fuel tank bracket based on equivalent design
- Li, Jingwei
- Analysis of forming process for hot stamping fuel tank bracket of commercial vehicles
- Li, Jingwei
- The effect of niobium-vanadium composite microalloying on the strength and toughness of hot press forming steel
- Li, Jingwei
- The effect of composite microalloying on the performance of hot press forming B-pillars