Proceedings of the 2025 8th International Conference on Traffic Transportation and Civil Architecture (ICTTCA 2025)

<Previous Article In Volume
Next Article In Volume>

Numerical Simulation and Construction Technology of Prefabricated Columns with Steel Joints

Authors
Baoquan Yin1, 2, Ziyi Yang1, *, Jing Huang3, Xiaoyan Wang2
1Guangdong Polytechnic of Water Resources and Electric Engineering, Guangzhou, China
2Tun Abdul Razak University, Kuala Lumpur, Malaysia
3China Civil Engineering Construction Corporation, Beijing, China
*Corresponding author. Email: yangzy@gdsdxy.cn
Corresponding Author
Ziyi Yang
Available Online 28 July 2025.
DOI
10.2991/978-94-6463-793-9_2How to use a DOI?
Keywords
Prefabricated Column; Numerical Model; Construction Technology; Construction Quality
Abstract

This paper, based on the R&D and production base of a company, designed prefabricated concrete column components with section steel connection joints, for which a refined numerical model was established for finite element stress simulation and stress performance verification. Through the research and development of precast column node connectors, precast column positioning formwork devices and new technologies, problems such as poor concrete pouring at nodes, difficult positioning of precast columns, difficulty in setting up oblique supports and adjusting verticality have been solved. These new technologies include visual reinforcement arrangement technology, carbon dioxide gas shielded welding construction technology at the bottom of the column, two-way reserved bell mouth concrete pouring technology at the bottom of the column, etc. Through these methods, the construction quality and efficiency of the concrete prefabricated column structure are further improved.

Copyright
© 2025 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Next Article In Volume>
Volume Title
Proceedings of the 2025 8th International Conference on Traffic Transportation and Civil Architecture (ICTTCA 2025)
Series
Atlantis Highlights in Engineering
Publication Date
28 July 2025
ISBN
978-94-6463-793-9
ISSN
2589-4943
DOI
10.2991/978-94-6463-793-9_2How to use a DOI?
Copyright
© 2025 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Baoquan Yin
AU  - Ziyi Yang
AU  - Jing Huang
AU  - Xiaoyan Wang
PY  - 2025
DA  - 2025/07/28
TI  - Numerical Simulation and Construction Technology of Prefabricated Columns with Steel Joints
BT  - Proceedings of the 2025 8th International Conference on Traffic Transportation and Civil Architecture (ICTTCA 2025)
PB  - Atlantis Press
SP  - 7
EP  - 21
SN  - 2589-4943
UR  - https://doi.org/10.2991/978-94-6463-793-9_2
DO  - 10.2991/978-94-6463-793-9_2
ID  - Yin2025
ER  -