Advances in Engineering Research

+ Advanced search
29128 articles
Proceedings Article

Study of PSO-SVM Model for Daily Water Demand Prediction

Baiyi Jiang, Tianwei Mu, Ming Zhao, Danyu Shen, Lingping Wang
For solving the problem of daily water demand in G city, a method of particle swarm optimization algorithm combined support vector machine (PSO-SVM) is presented. The expansion constant and penalty factor firstly are selected by particle swarm optimization (PSO). Secondly, the historical water demands...
Proceedings Article

Using a dynamic model of technological processes to reduce the cost of heavy oil extraction

Dr. Iakov S. Korovin, Dr. Anatoly I. Kalyaev, Dr. Maxim V. Khisamutdinov
The article considers the problem of reducing the cost of heavy oil productions. A new approach, based on the intelligent analysis of successful events' historical data of qualitative EOR application, is proposed. Based on database info analysis, the synthesis of a model, targeted to automated search...
Proceedings Article

College English Teaching in Social Networking Services Based on Six Degrees of Separation

Xiangju Chai
Social Networking Services (SNS) which are based on the theory of Six Degrees of Separation emerged in 2003. With the rapid growth, it came to be a popular social service network in 2009. SNS have features that conform to learning theory of constructivism, thus having more advantages than traditional...
Proceedings Article

A Method of Plastic Gear Inspection Based on Machine Vision

Jianbiao Ding, Yajun Zhang, Jian Zhuang, Ri Pan
The defect detection of plastic gear is difficult because of its small size, so a method based on machine vision is proposed to inspect plastic gear accurately and quickly. Digital image of plastic gear is collected by CCD camera, and then the image is preprocessed to generate single pixel edge of gear....
Proceedings Article

A Platinum Resistance Bridge Thermometer

Ximin Liu
A platinum resistance bridge thermometer is introduced. It implements linear temperature measurement in -200~850 degrees with a bridge circuit. It consists of bridge circuit, multi-channel switches, amplifier, AD574, display, COM port, precision power supply, 89C51 etc. After the analysis of bridge circuit...
Proceedings Article

Determination of strontium content in pyrotechnics used for fireworks and firecrackers based on Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)

Jun-yi Wu
Methods used for the determination of strontium content in pyrotechnics are mostly based on traditional chemical method, which is lengthy and cumbersome. If inductively coupled plasma emission spectrometry or atomic absorption spectrometry are used to determine the strontium with high content, the sample...
Proceedings Article

Experimental Study on Saturation Distribution of Heterogeneous Reservoir

Yanfu Pi, Xiaosai Guo, Jing Wang, Yongcun Jia
Polymer flooding has a large-scale promotion in Daqing oilfield, this paper prepared two-dimensional heterogeneous model according to the typical reservoir in Daqing oilfield and did the experiments of water flooding and polymer flooding with the method of three tubes parallel, monitored the oil saturation...
Proceedings Article

Study of the Xi’an Xiao Yan pagoda’s dynamic characteristics

Tao Yang, Nan Zhao, She-Liang Wang
Finite element software ABAQUS was used to calculate the dynamic characteristics of Xi’an Xiao Yan pagoda by a three-dimensional entity model, and a variety of factors were simulated on its dynamic characteristics. Results show that it is feasible to calculate the structural dynamic characteristics by...
Proceedings Article

Engineering geological and geotechnical assessment of floor of Control Building of Nuclear Reactors-7&8 of Rajasthan Atomic Power Project, Rawatbhata, India

Jain Prasnna, A.K. Naithani, Bhusan Rabi, L.G. Singh, D.S. Rawat, J.K. Jain, P.C. Nawani
To verify whether insitu conditions have been realistically estimated during investigation and to furnish the permanent data set for the interpretation of geological conditions, foundation floor mapping of important structure like control building of nuclear power plant is essential. At Rawatbhata, adjacent...
Proceedings Article

Modeling and study of fracture and delamination in a packaging laminate

De-feng Zhang, Md. Shafiqu Islaml, Eskil Andreasson, Sharon Kao-Walter
In this work, a packaging laminate consisting of LDPE (Low Density Polyethylene), Al-foil (Aluminum foil) is focused, and failure due to necking in substrates and interfacial delamination under loading are considered. A coupled elasto-plasticity damage and fracture constitutive model is combined. The...
Proceedings Article

Forster Resonance Energy Transfer in a Hybrid System of CdTe Quantum dots-RhB

Lai Wei, Jianxin Zhou, Zhicong He, Fang Li
The forster resonance energy transfer (FRET) between different CdTe QDs and RhB were investigated by steady-state and femtosecond time-resolved photoluminescence spectra technique. Through the measurements on three different CdTe sample solutions, it was found that the FRET efficiency is proportional...
Proceedings Article

Research on the Progress of Technologies and Materials and Its Features about Prefabricated Constructions in China

Qiaofeng Qian
Domestic prefabricated construction has developed for a long period, and has attracted more and more attentions. This paper analyzes the progresses it has made in technical and material aspects through history and prospect. Furthermore, the features and advantages are summarized in order to promote the...
Proceedings Article

Multi-mode Convergence-based Indoor Wireless Positioning System Design

Shuang Xu, Zhigang Wen
In this paper, an indoor positioning method is presented for self-localization of a mobile device by combining Wi-Fi wireless location, strap-down inertial navigation systems (SINS), augment reality and ultrasonic positioning. Over the last few years, inertial sensors with low cost and mobile devices...
Proceedings Article

Pn-PAR and CO2 Responses of Prunus avium to Drought Stress during Hard Nucleus Stage

Ju Guan, Jin Wang, Xiulan Lv
Aim at the drought, one of the important stress factors, we chose the Prunus avium named ‘Hong Deng’ to experiment. Through artificial control field soil water content, to different drought stress treatment of sweet cherry, we collected the changes under different drought stress, including characteristics...
Proceedings Article

An accurate comparison of type-reduction algorithms for interval type-2 fuzzy sets using simulated data

Haihua Xing, Hongyan Lin, Chunhui Song
In order to find the best type-reduction algorithm of interval type-2 fuzzy sets with different characteristics, this paper makes a comparative analysis of KM, EKM, IASC and EIASC. Experiments are carried out on three type-2 fuzzy sets to compare the four algorithms.The results show that the four algorithms...
Proceedings Article

Lax Pair, Hirota Bilinear Form and Soliton Solutions of the Seventh-Order Kaup-Kupershmidt Equation in Plasma Physics

Yuping Zhang, Wenguang Zhang
In this paper, the seventh-order Kaup-Kupershmidt (KK) equation arising in fluids and plasmas is considered. The pseudopotentials of the equation are derived, based on the pseudopotentials, the Lax pair of the equation is get, which shows that the equation has the Lax integrability. It is a very important...
Proceedings Article

The Market Statistical Analysis of Hainan Inbound Tourism Source

Tong YU
This paper is based on the relevant data of Hainan entry tourism from 2006 to 2015, and analyses the development of Hainan inbound tourism and composition with the aid of Excel software as well as uses clustering analysis of SPSS23.0 software. The results show that Hainan entry tourism industry develops...
Proceedings Article

The Feasibility Study of Marine Diesel Engine Exhaust Gas for Ballast Water Treatment

Zhaoqiang Li, Baocheng Lu
All kinds of Marine creatures of ship's ballast water with the migration of vessels, globalization, and with the discharge of ballast water, invaded the local ecosystem, breaking the original ecological balance. Ballast water caused by biological invasion on the global diversity of ecological system,...
Proceedings Article

The Concept of Sustainable Architecture on Public Open Space Design in the Waterfront Area of Ternate City (Case Study: Area Tapak I)

Endah Harisun
The phenomenon of the development of the city of Ternate in recent years shows that there has been a crisis in the availability of public space. with the construction of malls and offices, has the opportunity to create a distance between the layers of society and the beach as the identity of the city...
Proceedings Article

Legal Protection of Local Wisdom in the Context of Intellectual Property Rights Law: Study of Traditional Knowledge of Lubuk Larangan in Jambi Malay Indigenous People

Dwi Suryahartati, Firya Oktaviarni, Windarto
The Lubuk Larangan Tradition is one way for most of the indigenous people in Jambi Province who live in the watershed to protect the water and fish that are almost extinct. This tradition is carried out with certain skills and knowledge that are based on local wisdom and are based on the values contained...
Proceedings Article

Centrifugal Pump Bearing Analysis With Amplitude Indicator Using Vibration Meter

Juan Ardi Kusuma, Firman Yasa Utama
Centrifugal pumps In this company serve to distribute plant waste to wastewater treatment installations in order to reduce waste levels. One component of centrifugal pump on wastewater treatment plant to be aware of is bearing. The treatment has been used corrective maintenance which is when the machine...
Proceedings Article

Quick Response Decomposition Watermarking Algorithm based on Discrete Wavelet Transform Techniques

T. R. Ganesh Babu, R. Praveena, M. Lakshmi, Balachandra Pattanaik
Now a days, Image compression schemes and water marking is widely performed in signal processing with the help of wavelet transform. In comparison with approaches based on DCT and wavelet-based watermarking in some cases wavelet based Watermarking schemes are used better. In the literatures hardware...
Proceedings Article

Engineering Ethics Factors and Prevention in Xiangshui Chemical Explosion

Guangyong Yang, Yanan Wang, Hui Yang, Fuxiang Wang
With the accelerating process of urbanization in China, the industrial safety risks faced by the urban public are increasing. A series of dangerous chemical explosion accidents not only caused casualties, economic losses and environmental damage to the production personnel and the surrounding people,...
Proceedings Article

Practice Exploration of Intelligent Construction Management System in Large-Scale Construction Projects

Mingjian Jiang, Yujie Wang
With the digital transformation of construction engineering, traditional construction management is unable to meet the needs of large-scale projects due to outdated information and inefficient decision-making. This article adopts the technical details of AI algorithms (such as YOLOv5 object detection)...
Proceedings Article

A Preliminary Study on Emission Limits of Substation Noise Based on Equivalent Annoyance

Xingwang Chen, Qi Wang, Wen Xue, Wenchao Yuan, Yuhua Chen, Guoqing Di
Substation noise disturbs residents despite satisfying emission standards because the impact of its low-frequency components is underestimated by the commonly used A-weighted equivalent continuous sound pressure level (LAeq). To optimize the control indicators and emission limits of substation noise,...
Proceedings Article

Study on Seismic Performance of Variable Section Columns Based on Increasing Section Method

Jingwei Li, Xin Liu
In order to improve the seismic performance of variable section columns, nine finite element models of variable section columns reinforced by increasing section method were established by using finite element software ABAQUS to study the influence of different reinforcement grades and section areas on...
Proceedings Article

The Present Situation and Trend of Mobile Library Services

Xiaohong Li
The concept of mobile library has broken into our modern daily life, the service items of mobile library naturally become a research hotspot. This paper describes from the current situation development of mobile library to the challenges it faced, by the new requirements of mobile library services in...
Proceedings Article

Research on Virtual Network Remapping of Demand Change

Yiqiu Fang, Hongjian Wu
Virtual network request resources are dynamically changing, and there are fewer studies in this area.In view of this situation, in this paper the virtual network mapping model is improved, the model of minimizing the cost of resource request change and improving the access rate of virtual network is...
Proceedings Article

Decomposition of electricity consumption of Shandong province based on LMDI method

Fuqiang Li, Huiru Zhao, Xiaoyu Han, Nana Li, Yuou Hu
In this paper, we decompose the electricity consumption changes of the whole industries of Shandong province in 2006 -2012 into activity effect, structure effect and intensity effect, using LMDI method. The results show that the expansion of economic volume mainly attributes the electricity consumption...
Proceedings Article

Dispersion energy analysis of Rayleigh and Love waves using finite-difference modeling

Binbin Mi, Jianghai Xia, Chao Shen, Limin Wang
Surface-wave analysis methods have been effectively and widely used to determine shear (S) wave velocity. To separate and identify different dispersive modes of surface waves accurately is one of key steps using surface-wave methods. We analyze the dispersion energy of Rayleigh and Love waves based on...
Proceedings Article

Research on Simulation Method of Protection System for UHVDC Training System

Ke-Yuan QIN, Wu-Guang TAN, Qin SONG, Bing LI, Qi-Zhen SUN
The protection system simulation is an important part of the simulation training system for the UHVDC converter station. It is an important indicator of the fidelity of the training system to accurately simulate the protection action after the fault. In this paper, a simulation method for protection...
Proceedings Article

Assessment of progressive collapse of operated buildings and structures based upon structural damage

S.I. Merkulov, A.I. Tatarenkov, R.V. Lesovik
The paper outlines different solutions to address the problem of progressive collapse when designing buildings and structures and proposes possible modes of progressive collapse of structural systems. It presents the requirements stipulated by regulatory documents for assessing progressive collapse of...
Proceedings Article

Distribution of Black Carbon in The Sediments From The Changjiang River

Liang Huang
Concentrations of black carbon (BC) were determined in the sediments from the main stream and the tributary of the Changjiang River with CTO-375 method. Meanwhile, the total organic carbon (TOC) contents, grain size of sediments were also measured. BC contents ranged from 0.22 to 1.89 mg/g, which was...
Proceedings Article

Simulation Study of a Stand-alone Wind-pumped Storage System

Hao Guo, Zheng Li
In order to improve the penetration of wind energy in a grid, pumped storage system for smoothing the fluctuations of wind power has been presented. A stand-alone wind-pumped storage and hydropower system which can transform wind power into conventional hydropower integrating to the grid can maximize...
Proceedings Article

Comparison of Moving Average-Based, S Growth-Based, and AUF Rainfall-Induced Soil Erosion Area Models

Lin Chen, Nannan Ma, Yulong Chen
This paper gives the comparison of the moving average, S growth and adaptive updating forecasting(AUF) models based on the rainfall-induced soil erosion area experiment. The results show that (1) the average relative error of the moving average method is 5.7%–12.1%, while S growth model has an error...
Proceedings Article

Research On Intelligent Low Carbon Urban Lighting System

Tao Wang, Zhanhua Zan, Zhenlong Yang, Jinlong Zhu, Longfei Ma, Yapeng Hu, Xinchao Zhao
Smart low-carbon city as a rapidly developing field is the most investment value of the new project in the 21st century.In this paper, we propose an intelligent low carbon urban lighting system using fuzzy control and neural network control algorithm, it can realize intelligent, low carbonization and...
Proceedings Article

The Feasibility of Long Cycle Time Synchronization for Wireless Sensor Networks

Fuqiang Wang, Xiaoming Wu, Hong Liu, Yifan Hu, Xiangzhi Liu
Energy efficiency has received extensive attention in energy-constrained Wireless Sensor Networks (WSNs). As is known, radio communication accounts for major energy consumption of wireless device and the control of radio transmitter can make effective function with energy efficiency system. In this paper...
Proceedings Article

Design of Bionic Bamboo Steel Bicycle

Tao Huang, Yanqin Gao, Maohuang Xu, Mingming Zhu
Bamboo steel is composed of recyclable sinocalamus affinis with rich resources in China, environmentally friendly phenolic resin and moisture. The high-performance multi-purpose bamboo-based fiber composite processed with multiple technologies does not require special care and maintenance in use. Based...
Proceedings Article

Effect of Elastic Modulus of Adhesives on Stress Distribution in Weld-bonded Single Lap DP 600 Steel Joint

Min You, Jian-Jun Xu, Jian-Li Li, Hai-Zhou Yu
The effect of the adhesives modulus from 0.05 GPa to 6 GPa on the stress distribution in weld-bonded single lap Dual Phase 600 steel joint was investigated using elastic finite element method (FEM). The results from the numerical simulation show that all the peak values of the stresses along the mid-bondline...
Proceedings Article

The Media Mode and Innovation of Animation Culture in the Era of Mobile Internet

ZongHua Tao, XiaoCheng Zhou, ZhenYan Qin
The Internet animation is a new media ways and means of communication, through between the two culture development and industry trend. Analysis mobile Internet era animation culture for the audience and the market value and role in promoting, by American and Japanese animation culture industry characteristics...
Proceedings Article

Sensor Networks and Optimal Regular Covering of the Plane With Equal Sectors

A. Erzin, N. Shabelnikova
We suppose that in the sensor network, the sensing areas of the sensors are equal sectors, and consider the problem of regular covering of the plane with minimal number of identical sensors per unit area. In the regular cover, the plane is split into the equal regular polygons – “tiles” (equilateral...
Proceedings Article

A new MAC protocol of UASN (RABIC-MAC) based on high efficiency, concurrent and bidirection

Jun Liu, Xiao Lan Yang, Ling Feng Peng, Peng Ying Lei
Studies on MAC protocols of the Underwater Acoustic Sensor Network (UASN) are very important due to wide application area and great application potential of UASN. In this paper, a new concurrent bidirectional MAC protocol based on receiver self-adaption (RABIC-MAC) is proposed to improve the data transmission...
Proceedings Article

Remote multi-function fire alarm system based on Internet of things

Lihui Wang, Shuai Zhao, Jianqing Huang, Jianyu Ji
This project uses MCU STC15W408AS (stable, energy saving, high speed), temperature sensor DS18B20 (cheap, high efficiency, stable), MQ2 resistance type semiconductor smog sensor (high stability, fast response and economy) and NRF24L01 wireless transmitting and receiving module (energy saving, small volume,...
Proceedings Article

Research on Application of Database Architecture in Computer Software Production

Shan Jiang
The applications of database architecture in the computer software production mainly based on the features of the database architecture, such as reliability, data capacity, easy expansion, wide applicability, easy maintenance and so on. With the development of computer technology, computer users are...
Proceedings Article

Design and Research of the Wire - Driven Lumbar Parallel Rehabilitation Device

Ming-De Gong, Xiang-Fei Kong
In this paper, a new type of wire-driven lumbar parallel rehabilitation device is designed based on the wire-driven parallel robot to realize the purpose of rehabilitation training the lumbar of the patient. On the basis of designing the mechanical structure, the kinematics of the device is analysed...
Proceedings Article

Bayesian network modelling on data from fine needle aspiration cytology examination for breast cancer diagnosis

Shuo Liu, Jinshu Zeng, Yuhua Wang, Hongqin Yang, Yuhua Li, Liam Maguire, Jia Zhai, Yi Cao, Xuemei Ding
The paper employed Bayesian network (BN) modelling approach to discover causal dependencies among different data features of Breast Cancer Wisconsin Dataset (BCWD) derived from openly sourced UCI repository. K2 learning algorithm and k-fold cross validation were used to construct and optimize BN structure....
Proceedings Article

AIRPORT DISASTER MANAGEMENT PLAN TOWARDS NATURAL DISASTER

Muhamad Agil Saputra, Ready Satrio A, Veronica Veronica
This paper outlines the Airport Disaster Management Plan towards the unexpected natural disaster. Mount Agung eruption issue has distracted the passengers to visit Bali as the world's tourist attraction. I Gusti Ngurah Rai International Airport as the air gateway to Bali should prepare for the pre-in-post...
Proceedings Article

Improving A-Based Path Planning through Interpolation and Curve Smoothing with Collision-Aware Correction

Weiting Song
With the development of automatic navigation technology, path planning algorithms play a vital role in mobile robots and intelligent transportation systems. Although the traditional A* algorithm is stable and efficient, the paths it generates often contain numerous turning points and lack smoothness,...
Proceedings Article

Design and Implementation of RISC-V Based Convolutionally Accelerated Processors

Zhekai Cui
Convolutional neural networks (CNNs) have become widely used in a variety of application scenarios due to the rapid development of deep learning and artificial intelligence technologies. However, traditional general-purpose processors face performance bottlenecks when dealing with large-scale convolutional...
Proceedings Article

A Study on the Design of Vaccine Cooling Boxes for Remote and Border Areas

Imron Rosyadi, Haryadi, Dhimas Satria
Immunization is an effort to actively generate/increase a person’s immunity to a disease, so that if one day they are exposed to the disease, they will not get sick or only experience mild illness. This is done by administering a vaccine into a person’s body. Vaccines used to form antibodies have some...
Proceedings Article

Effect of Nickel Pre-plating on the Plating of Zn-Ni Alloy Coating on Stainless Steel Substrate

X.D. Liu, Y. Zhou, C.Y. Nie, J. Liu, C.Y. Xiao
Nickel pre-plating on stainless steel parts, electroplating Zn-Ni alloy layer on the basis of pre-plating layer. In order to improve the bonding strength between the coating and substrate by the introduction of nickel to form a good bonding with the iron matrix. To explore the influence of nickel pre-plating...
Proceedings Article

Effect on Hep-1cell Calcium Homeostasis after Aβ25-35 Injury

Wenzhao Liang, Bing Yan, Mingzhu Yu, Yankun Shao, Jinting He
The purpose of this study was to observe the effect of β-amyloid protein injury on intracellular calcium homeostasis in Hep-1 cells. Aβ25-35 was used to build the Hep-1 cell model of AD. Intracellular Calcium measurements was performed by incubation with the calcium indicator probe and then observed...
Proceedings Article

Research on integration method for digital watershed simulation model based on component technology

Haiyan Liu, Xiaomin Liu, Yanyan Liu, Baohui Shi
In order to improve the low reuse rate of code and the low development efficiency, the paper takes use of the Common Component Architecture standards, builds a architecture admitting the clients access. The paper analyzes the importance of component technologies, introduces the composition structure...
Proceedings Article

A Study on the Characteristics of Nantong Fine-Brush Woodcarving Based on CNC Engraving and Manual Engraving

Weixia Gao, Zhihui Wu, Yuzhong Jiang
Nantong fine-brush woodcarving is semi-processed first through CNC engraving machines which use Chinese traditional fine-brush paintings as carving patterns, then finished by manual engraving with hand and power tools. This paper dealt with the characteristics of Nantong fine-brush woodcarving from development...
Proceedings Article

Visualization of HVAC pipeline integrated arrangement based on BIM technology

Size Li, Zeqin Liu
With the relevant information and data of building project as a model basis, the building information model are established. It is an innovative building design, construction and management methods. Revit realized the transformation from simple information to information for specific purposes, maximizing...
Proceedings Article

A wholegrain level dry separation system for thermal coal sorting Analysis

Jinbo Zhu, Erning Zhao
This paper presents a dry separation system for thermal coal sorting in which the major grading equipment don't need to water, to avoid the shortage of the traditional wet separation process along with the complex slime water treatment systems, simplifying the process, and reducing the costs, meeting...
Proceedings Article

Flight Guidance and Control System Modeling and Design Based on AADL

Wei Zhong, LiChen Zhang
Flight Guidance and Control System is widely used in the world.which effectively improve the efficiency of play operation ,reduce system maintenance and construction costs,etc. so,This paper propose the use of structural analysis and design language(AADL) for Flight Management (FM).First,it is described...
Proceedings Article

Efficient Implementation of Precise Exception for Processor Based on Pre-detection

Qingyu Chen, Erjuan Zhu, Longsheng Wu
Embedded systems have higher requirements on real-time performance of processor, and exception, which can interrupt normal execution of program, will decrease the processor performance. For improving the processor exception handling efficiency, a precise exception handling method for embedded pipeline...
Proceedings Article

Productivity Calculation for Fractured Wells in Low Permeability Gas Reservoirs

Cai Hua, Zhang Guohua, Li Yangfan
PH gas field, which located in East China Offshore, has the characteristic: Prematurely Senile Appearance. That means it is currently in the middle period of development, but has many features of the later period of the gas field’s life. In order to compensate the reduction of gas production, the development...
Proceedings Article

Progress in the Research of Virtual Trial Assembly

Yang Li, Jian Yao, Yuling Zhang
There are two ways of trial assembly for steel structures which are well known as the physical trial assembly and the virtual trial assembly. The physical trial assembly is of high reliability but low economy. Nevertheless, the virtual trial assembly can save cost to the extreme extent and shorten the...
Proceedings Article

Network Design and Performance Analysis of Wearable Wireless Sensor Network

Lincong Zhang, Wenbo Zhang
Wearable devices have got rapidly development in recent years, and the information transmission of them becomes an international research focus. To meet the requirement of reliability, real time and high throughput, ZigBee protocol plays an important role with its own inherent advantages and reasonable...
Proceedings Article

The 6204 Bearing Dynamic Analysis Based on UG NX Technology

Zhao Song
This paper based on the 6204 rolling bearing as the research object, Application of UG NX software to carry on the analysis to the bearing. In the modeling module of the UG NX, drawing the bearings, shaft, gears and fit them together. When the move correctly, take the proper load on it and make the software...
Proceedings Article

The Inspiration of Large-scale Settlement of Modern Suburban Areas in the Neighborhood Center in Suzhou and Chuzhou Industrial Park

Rongyu SUN, Jiayin GUO
The development of Neighborhood Center in overseas and domestic is illustrated in this article under the background of current situation of large-scale settlement of modern suburban areas. Here, the 9 neighborhood centers in Su and Chu industrial park were investigated and analyzed in the first place,...
Proceedings Article

Blind Equalization Algorithm for 16-QAM Signals

Jianping Zhang, Xiaoling Zeng
This article propose and use the Modify Constant Modulus Algorithm (MCMA) and Decision-Directed Least Mean Square (DD-LMS) joint equalization Algorithm to balance Inter-Symbol-Interference (ISI) at the receiving end of 16-QAM. We analyzed the joint equalization technology implementation and switching...
Proceedings Article

Symmetry Of Irreducible Cluster Energy And The Theory Of Elastic Constant Crystals: Co as an Example

Yu.M. Gufan, O.V. Naskalova, O.V. Kukin, G.V. Fomin
The paper proposes a new method of transferable calculation of elastic constants of the second, third and fourth orders. The method is based on the assumption that the potential energy of bulk crystals may be presented as the decomposition into irreducible energies of two, three, and four atomic clusters....
Proceedings Article

Modeling of railway vehicles movement having deviations in content of running parts

Gennadiy Petrov, Anatoliy Tarmaev
The need for an accurate mathematical description of the dynamic processes occurring in the running parts of the railway vehicles is substantiated, taking into account the real operating conditions of the rolling stock. A mathematical model of motion of vehicles with a variable structure of a system...
Proceedings Article

A Stable Ant-based Routing Protocol for Flying Ad Hoc Networks

Xueli Zheng, Qian Qi, Qingwen Wang, Yongqiang Li
A Stable Ant-based Routing Protocol (SARP) for Flying Ad Hoc Networks is proposed in this paper. SARP is based on the Ant Colony Optimization meta-heuristic, which selects the next hop node according the stable value, pheromone and the energy of the link. The stable value is calculated by the transmission...
Proceedings Article

Capacity Evaluation and Optimization of Heavy Haul Railway Station Based on the Simulation of Operation of Station

Mengqi Ma, Xingchen Zhang, Zhimei Wang
Heavy haul railway mainly transport bulk cargo such as coal and steel. Its characteristics includes large volume of freight, complicated operation of station, obvious heavy cargo direction etc. The bulk cargo's timeliness standard is low, the occupied time between different operations of station is distinct...
Proceedings Article

Android Based Information System and SMS Gateway to Improve PMI Donors

Jatmiko Indriyanto, Miftakhul Huda, Qirom
Researchers conducted research at PMI (Indonesian Red Cross) in Tegal City. After visiting PMI, the researchers found that PMI often held blood donor activities in various places. However, the efforts made are still unable to cover the blood needs that are needed each month. PMI has made efforts to send...
Proceedings Article

Research on the Layout Adjustment Plan for Flood Storage and Detention Areas Near Wuhan in the Yangtze River’s Middle and Lower Reaches

Han Wang, Jia-Ming Liu, Guo Peng, Chen-Wei Lu
Given the current flood control situation and socio-economic development in the Yangtze River Basin, adjusting the layout of flood storage and detention areas is highly necessary. This paper conducts research on the layout adjustment of flood storage and detention areas near Wuhan. Through a systematic...
Proceedings Article

Analysis of Biodiesel Implementation to Reduce Exhaust Emissions: Experiments on a Mitsubishi 4-Stroke Diesel Engine

Barokah Barokah, Moejiono Moejiono, Supardi Supardi, Hendra Purnomo, Rahmat Hidayat, Yohan Wibisono
Carbon Monoxide (CO) is an exhaust gas particle that has negative impacts on humans or the environment if it exceeds a certain concentration threshold. In efforts to control the emission concentration threshold, concrete efforts need to be made, including the use of fuels that are more environmentally...
Proceedings Article

Detection of Water Stress in Vegetable Crops Using Deep Learning

I Nyoman Kusuma Wardana, I Wayan Aditya Suranata, I Wayan Raka Ardana, Dewa Ayu Indah Cahya Dewi, Komang Ayu Triana Indah, Setio Basuki
Properly monitoring plant health in hydroponic farming is crucial as the plants rely solely on mineral water flowing through their roots as a growth source. One of the main challenges is the early detection of wilt in plants due to water stress. If not addressed promptly, water stress can lead to crop...
Proceedings Article

Test and Analysis of Short Electric Arc Trepanning Machining of Difficult-to-Cut Material

Hai Peng, Zhaoyuan Zhang
Short electric arc machining is a new type of special processing technology, and the method has many advantages such as no cutting force, high processing efficiency and little influence on thermal deformation, etc. In this paper, the features of several typical difficult-to-cut materials were introduced....
Proceedings Article

A reform of communication principle for communication engineering specialty in application-oriented universities

Qiaoyun Sun, Jiang Zhou, Min Wang, Shuguang Zhang, Yu Zhang
The characteristics of communication principle course and the teaching status are analyzed in this paper. Aiming at problems in the teaching process, the reform is performed about the curriculum content, practical teaching and examination mode, etc. Some teaching reform suggestions are put forward for...
Proceedings Article

Research on the mechanism of micro film advertising communication based on complex network

Lin Wang
Micro film advertising is a kind of propaganda means which is used to transmit information to the public for a specific need. The spread of the main micro film advertising is the initiator of brand advertising, which is mainly spread through two ways: one is the use of video sites, social networking...
Proceedings Article

Analysis of Network Security Situation Based on Principal Component Analysis and Phase Space Reconstruction

Wenzhi Zhu
In order to improve the accuracy of network potential hazard trend estimation, a method of network potential hazard estimation based on the combination of grey relational analysis (GRA) and improved support vector machine (SVM) is proposed. At first, determine evaluation index weight by GRA, then optimize...
Proceedings Article

The research of SBR process for LAS waste water treatment

Wenyuan Tan, Liangqin Zhou, Dayou Fu, Yuqin Chen
The treatment of the waste water containing Linear Alkyl benzene sulphonate (LAS) was studied by the Sequencing Batch Reacto r(SBR)activated sludge process. The activated sludge was domesticated to get the micro biome which had a prominent degradation effect on the LAS. Simulated the SBR and find the...
Proceedings Article

A Study on the Loss Compensation Estimation of Marine Living Resources Resulting from the Land Reclamation in China

Xiuhua Yan, Rongshuo Cai, Yashu Bai
In this article, the loss of marine living resources resulting from the land reclamation as part of the sea-development plan for the regional construction of Niutou Bay, Changle, Fujian Province (including monetary value) was studied, based on the data of this area and the current estimation method for...
Proceedings Article

Calculation of Humidity of Autoclave Cellular Composites Under Service Conditions

Vladimir gennadievich Gagarin, Pavel pavlovich Pastushkov, Natalia victorovna Pavlenko, Ekaterina victorovna Fomina, Yuriy konstantinovich Rubanov
Analysis of design methods of humidity regime for multilayered wall structures based on cellular autoclave composites is realized. Relevance of arrange of study of cellular composite work humidity is proved. Experimental studies were curried up as well as results of sorption wetting and water vapor transmission...
Proceedings Article

Target Tracking Algorithm Based on HOG Feature and Sparse Representation

Ming Li, Qingsong Fang
In this paper, we propose a novel algorithm to deal with the problem of visual tracking in some challenging situations, which is based on HOG feature and sparse representation. First of all, describe target according to the HOG feature; secondly, construct the appearance model of target with the sparse...
Proceedings Article

Statistics for Machining of high-strength materials

Zhiyuan Wu, Zhikun Tan, Shuhui Wang, Xiaoqing Dong
Through sorting and statistics of relevant test results on machining of high-strength materials at home and abroad, the tool materials and the distribution characteristics of tools' optimal geometric parameters as well as the possible causes are analyzed. The statistical results can be not only used...
Proceedings Article

Study on the Cost of Biomass Power Generation

Qi Gao
The development of biomass energy has been attracting attentions from all over the world. Biomass burning power generation is the main way to utilize the biomass energy with high cost of electricity. Based on the relevant analysis, the characteristics of the components of the electricity cost and the...
Proceedings Article

Development and application of ceramic membrane in oily wastewater treatment

Qianqian Song, Liping Qiu, Qi Qiu, Renzhen Cheng
Membrane separation technology, as an important water quality safeguards, has been widely studied and applied in water and wastewater treatment,because of its advantages ( low cost, convenient operation, no phase change and no secondary pollution). Compared with organic membrane, the inorganic ceramic...
Proceedings Article

WASP Model-based Optimization on Water Quality Monitoring Section in Ningxia Segment of the Yellow River

Xiangyi Meng, Jingwen Qi, Hui Qian, Mengna Li
According to the hydrographic features and current data of Yellow River’s Ningxia Sector, this study uses WASP model for water quality simulation and selects three pollution indexes COD, NH3-N and TP, conducting analysis on the spatial change characteristics of these three indexes. On this basis, the...
Proceedings Article

The slight impacts of marine current to Cd contents in bottom waters in Jiaozhou Bay

Dongfang Yang, Xiuqin Yang, Ming Wang, Sixi Zhu, Fengyou Wang
This paper analyzed the content, horizontal distribution and migration process of Cd in bottom waters in Jiaozhou Bay based on the investigation of Cd in July and October 1984. Results showed that Cd contents in bottom waters in July and October were 0.05-0.18 μg L-1 and 0.05-0.06 μg L-1, respectively,...
Proceedings Article

Simulation and Analysis of the Combined Power Process of LNG Cold Energy Recovery for Electricity Production

Ping Wang, Shuang-shuang Lv, Sheng-qiang Shen
The model of LNG cold energy recovery consisting of a Brayton cycle and a Rankine cycle is constructed in Aspen Plus. The effects of the inlet and outlet pressure of the turbines, ammonia-water flow rate, condensing temperature and the compressor outlet pressure to the thermal efficiency of the combined...
Proceedings Article

Research on ship-borne UXB antenna servo system based on LQG controller

Hui Ji, Xudong Zhang, Haiyu Ji
Linear Quadratic Gaussian optimal control which is namely LQG control algorithm, is superior to PI control algorithms in control performance, such as adjusting time and overshoot. In closed-loop system, LQG has good anti-interference ability and stability. In order to reduce the pointing error and tracking...
Proceedings Article

A Language Geographical Distribution Algorithm Based on Ant Colony Optimization

Hong Chen, Wensheng Zhang, Zhijian Zhao, Haozhe Liu
This article uses the ant colony algorithm to study the distribution change of languages in various regions under the same time period. We combined the neural network algorithm and made the population flow gradient as the main basis of pheromones to establish a world language distribution dynamic model.
Proceedings Article

Mathematical Modelling of the Power Regulator by the Example of an A11VO Axial Piston Pump (Bosch Rexroth)

V. G. Zedgenizov, D.V. Kokourov, D.S. Biryukov
The purpose of the article is to develop a mathematical model of the power regulator using an A11VO axial-piston pump (Bosch Rexroth) as an example and determine the effect of pressure on the control process parameters. A mathematical model of the regulator was developed; a scheme for its solution in...
Proceedings Article

Labor as One of the Core Values of a Competitive Expert in Agricultural and Engineering Industry

Svetlana V. Kulikova, Nadezhda N. Malchukova, Tatyana A. Konova
The education at any higher educational institution shall focus on students' ability to predict and correct their future activity within general cultural competences. The paperconsiders labor as one of universal human values aimed to improve the intelligence level of future engineers thus accelerating...
Proceedings Article

The existed problem, countermeasure and development trend for collection and recycling system of end-of-life vehicles in China

Yang Yang, Yan-Ping Yang
In the paper, the existed problem for its different parts of the collection system on ELV (end-of-life vehicle) are investigated deeply in China. Considering the national conditions, specific measures are taken to improve the automobile collection system, and a new system of the ELV recycling is provided....
Proceedings Article

Review of Carbon Reduction Theory and Calculation Methods of Carbon Emissions in China 's Iron and Steel Industry

Si-yu Liu, Jian-xun Fu, Juan Cheng, Hong-qiang Liu, Huai-bin Han
The paper reviews on the carbon reduction theory in Chinese steel industry and introduces three calculation methods of carbon footprint. Provincial Guidelines for Greenhouse Gas Inventories and Accounting Methods and Reporting Guidelines for Greenhouse Gas Emissions in Chinese Steel Producers are calculation...
Proceedings Article

Research on Accumulator Charging Model in UPS

Zheng Liu, Huihui Zou, Bo Zhang
UPS (Uninterruptible Power System) is a kind of high-powder electronic device that can provide high-quality electric power continuously and stably. Accumulator plays important role as energy storage equipment and its charging and discharging process is a complex electrochemical reaction, and parameters...
Proceedings Article

Life-cycle seismic insurance model for multi-story RC frames based stochastic big-data analysis

Jian Zhu, Junhai Zhao
The estimation of annual average seismic insurance premium in life service period for multi-story reinforced concrete (RC) frames based stochastic parameters models is the focus of the research. An innovative seismic analysis methodology is adopted for seismic loss estimation of buildings. The damage...
Proceedings Article

Road Damage Handling During Covid – 19 Pandemic Using DAU (General Allocation Fund) (Case Study of Kabupaten Karanganyar)

Angga Darmawan, Sri Sunarjono, Senja Rum Harnaeni, Zilhardi Idris
Planning and budgeting in regional development are two things that are interrelated and must be balanced. Planning and budgeting are integrated processes; therefore, the output of planning is budgeting. This study aims to determine the effect of the budget refocusing policy due to the covid pandemic...
Proceedings Article

Green Building Assessment of the Integrated Laboratory and Workshop for Vocational Education at Manado State Polytechnic

Dian Puspitas Sari, Maryke Alelo, Steve W.M. Supit, Stefani Switly Peginusa
Manado State Polytechnic has the main goal of implementing sustainability systems by applying the green architecture concept when building its facilities, including the Integrated Laboratory & Workshop which is still under Design Recognition. This research aims to assess the sustainability value...
Proceedings Article

Effects of Nd on Extrusion Phase and Texture of ZM21 Magnesium Alloy

Quan Li, Jian Peng, Weibo Zhu, Bin Zeng
In this paper, by adding different amounts of rare earth Nd magnesium alloys in ZM21, ZM21 study of Nd on magnesium alloy thermal processing temperature ductility and plasticity effects and mechanism of the law. The results show that alloy appeared 1-3 m needle and granular three alloy phase T1 and T2,...
Proceedings Article

The Diagnosis of Forging Bevel Gears on the Information Merge of Wavelet Neural Network

Zhanjun Liu
The synthetical symptoms of bevel gear is concluded. Using wavelet and mixed data merge does the intelligence diagnosis to the defect of bevel gear , which is integrated with data , characteristic, decision grate and nerve network . A model of wavelet neural network is constructed. In order to reduce...
Proceedings Article

Personalized Movie Recommendation Based on Social Tagging Systems

Lin Wang
In the Internet era, the movie website has become a mainstream platform for movies introduction and comment on the movie resources, annotation also has become a mainstream form of movie resources under the network environment of the new organization based on social tagging.. From the system point of...
Proceedings Article

Enrichment and purification of phenols from Callicarpa nudiflora Hook. et Arn by HP-20 macroporous resin

Xiaojie Yan, Sheng Huang, Fenglai Lu, Zhixin Gu, Lei Wang, Yonglin Huang, Dianpeng Li
Objective To study the technological parameters of the purification process of phenols from Callicarpa nudiflora (C. nudiflora) with HP-20 macroporous resin. Methods The kinetic adsorption and desorption experiments were carried out on HP-20 macroporous resin (HP-20) to optimize the separation process...