Atlantis Highlights in Engineering

With the construction requirements of building greening, industrialization and industrialization, and the requirements of various housing enterprises and construction units for multi-objective construction such as fine management of high-rise buildings, improving efficiency and reducing cost are getting...

China possesses abundant biomass resources, and the production of biochar represents an effective method for the resource utilization of biomass. Currently, the methods for biochar preparation include pyrolysis, microwave carbonization, and hydrothermal carbonization (HTC). HTC is particularly noteworthy...

This study investigates the stability and mechanical performance of a lattice-type high-pile cap foundation for an STT323 tower crane in soft soil conditions at a Shanghai office complex. The foundation, elevated 10 m with a 5.5 m×5.5 m cap, employs lattice columns (cross-sectional side length: 480 mm)...

Combined heat and power (CHP) plants are the main supply source in Germany’s district heating systems (DHS). Usually the generated power is fed into the power grid. Because CHP plants normally come along with thermal storages the heat supply operation is flexible, so that the electricity production can...

The building structural damage model is a mathematical model whose primary purpose is to assess the damage to building structures or components under external effects such as earthquakes. Over the past decades, scholars in earthquake engineering have researched building structural damage models and proposed...

The air pollution caused by coal-fired heating in the northern cities is again attracting attention. As a new type of heating mode, electric heating enters people's view. In order to make the public understand the characteristics of electric heating, this paper firstly analyzes the technical scheme of...

Research to study the effect of temperature and sulfonation time on the preparation of Methyl Ester Sulfonate (MES) surfactant using CPO-based Methyl Ester (ME) as raw material has been carried out. The temperature was varied 80 oC, 90 oC and 100 oC; while the observation time is carried out every 1...

Coal gasification is the process of converting solid into a gas mixture that has fuel value. Coal gasification will produce gas in the form of synthetic gas (syngas) with the main components consisting of carbon monoxide (CO), hydrogen(H2), and (CH4) gas. By converting coal using gasification as a clean...

The current approach of using ordinary Portland cement (OPC) and gypsum to enhance the sulfate attack resistance of high-belite calcium sulfoaluminate cement (HBCSA)-based materials remains inadequate, thereby limiting the application potential of this composite system in aggressive environments. To...

Surrounding rock classification represents distinguishing the different grades of surrounding rock according to the hardness and integrity of surrounding rock. Accurately obtaining the surrounding rock grade of drill jumbo working face is not only the basis for selecting the tunnel position and support...

Bucket foundations, favored for their low cost and ease of installation, have seen widespread adoption in marine renewable energy projects such as offshore wind farms. However, marine soils often exhibit high sensitivity, which can markedly influence soil strength and penetration resistance during installation....

The object of the present study is the mathematical side of extremi-related problems. We have studied certain applications of the variational calculus in the domain of vibrations existing in mechanical systems. The most frequently encountered problem in the matter of vibrations is the one of determining...

This paper studies the forecasting algorithm of RMB exchange rate. Firstly, the Complete Ensemble Empirical Mode Decomposition with Adaptive Noise algorithm (CEEMDAN) is used to decompose the exchange rate data into several intrinsic mode functions (IMF). Then the correlation coefficients of each IMF...

Electrolytic machining technology is one of the main machining methods of turbine blade, which is the core component of aerospace engine. The standardization and uniformity of the angle between the cathode feed direction and the clamping angle of the workpiece and the normal direction of the workpiece...

The aim of this study was to determine the number of bacteria and fungi in the fermentation process and characterization of these microorganisms. There were several steps in this research including production of fermented feed, isolation of indigenous microorganisms, purification, characterization of...

With the development of digital economy which multi-product co-management is an essential feature, e-commerce becomes harder to make decisions in the process of management. This paper studies the Multi-Product Newsvendor Problem with demand transfer, budget constraints and mental accounting under demand...

With the advancement of technology and social development, China has witnessed a gradual increase in offshore construction activities. However, this has led to the destruction and pollution of the marine environment, resulting in severe disruptions to the survival of marine life. Therefore, this paper...

With the overall informatization level of the logistics industry increasing day by day, the logistics data information shows explosive growth. The traditional logistics information management system lacks corresponding processing methods for large-scale, real-time and heterogeneous data information,...

The flash memory due to its shock - resistance, power economy and non-volatile nature is considered as a very popular storage device. It is widely used in mobile phones, sensor networks and hand-held devices. What attracts the attention is the data storage in the flash memory. Database vendors try to...

A change in the electricity consumption is taking place, where one of the main reasons is the large increase in Distributed Generation, as photovoltaic (PV) systems and electric batteries in the low voltage (LV) distribution grid. This could translate in specific cases into a situation of increased peak...

Accurate ground stress field modeling is essential for the design and construction of underground engineering projects. This paper presents a regression-based method for ground stress field inversion, employing least squares fitting to enhance precision and efficiency in stress field modeling. By selecting...

Research on new and renewable energy (EBT) continues to be developed to reduce dependence on fuel oil whose availability continues to decrease. Currently, an alternative energy product that has the opportunity to be developed is bioethanol because it has a high oxygen content so that it burns more completely...

The present research work deals with the behavior of the thermal decomposition of the coals from Shivee-Ovoo and Tavantolgoi deposits and the determination of the kinetic parameters of their thermal decomposition. Thermal decomposition experiments were performed at five different heating temperature...

This research delves into the optimization of 3D printing techniques for mold production, with a specific focus on understanding the critical factors influencing and interplaying with energy consumption. First, it aims to discern the pivotal parameters that significantly impact the quality of the printed...

Renewable energy can significantly reduce global CO2 emissions, both directly by reducing the use of fossil-based energy sources and indirectly through power-to-X pathways. These pathways facilitate the production of various fuels and chemical feedstocks, offering alternatives to fossil-based products....

This study is aimed at formulating competitiveness index system for Chinese medium-sized construction enterprises entering overseas international construction markets and evaluate a company’s competitiveness by adopting grey theory. An analytic network process (ANP) method is adopted to establish a set...

The part fabricated by fused deposition modeling (FDM) process is influenced by fabrication parameters viz., layer resolution, processing quality, fill mode and the processing material on surface roughness. In this work, effects of fabrication parameters are investigated experimentally. The test specimen...

A material development study is carried out on high-temperature PCMs with graphite. D-Mannitol and adipic acid are tested as high temperature PCM materials for application in industrial steam systems. The study concludes that adipic acid is easier to use because of better chemical stability and much...

During the Covid 19 pandemic, all learning cannot be carried out face-to-face, especially with learning that requires a practicum. Based on these problems, the authors researched the form of research and development based on quantitative research methods. Practical learning based on the virtual reality...

The textile industry continues to grapple with the challenge of maintaining high production efficiency and consistent fabric quality, particularly in fast-paced environments utilizing equipment like the Air Jet Loom ZA 205. This research pioneers the development of an Internet of Things (IoT)-based monitoring...

Increasing dependency and demand on digital healthcare systems, needs for secure, efficient, and intelligent management of patient data traffic have become critical. This research explores the study of patient related network traffic in a Software-Defined Networking (SDN) environment. Some promising...

The Saguenay region in Quebec is largely covered by sensitive marine clays that are highly susceptible to large retrogressive landslides. This work addresses the development of a methodology to forecast slope failure and zonation of landslides in sensitive clays. This is demonstrated by applying an integrated...

In order to clarify the spatiotemporal variation patterns of water quality in urban river lake connected areas and improve the regional water environment, this research takes “Shanghai Fish” Lake and its surrounding backbone river network as the research objects. One-dimensional and two-dimensional hydrodynamic...

The current urban life needs a public, very attractive, leisure and entertainment space that can enjoy ecological services. Based on the above requirements, the slow traffic system bridge plays a role of “stringing beads into a chain” in the ecological park around the city. Its design complexity and...

Fermented feed made from water hyacinth contain high nutrition, increase goat weight, improve carcass quality and improve the reproduction system of goats. The aims of this study were determining the effect of fermege formula 3 on the quality of goat spermatozoa was compared to conventional feed. This...

Underground mining induces significant changes in in-situ stress due to excavation method, which leads to stress redistribution and, consequently, loads concentrations on drifts walls, access tunnels and/or mining panels. As mining progresses to greater depths, empirical or observational methods for...

The limited availability of natural fiber sources makes durian peel waste an alternative source of natural fiber. The characteristic of durian peel waste, which is mechanically strength, has the potential to be developed. During the durian season, the amount of durian consumption by the community increases...

The foundation of the station built in the coastal area is often weak in lithology, and uneven settlement is easy to occur in the station. The safety risk system of station pipeline under uneven settlement involves many elements and complex components. Therefore, to evaluate the safety level of station...

With the development of e-commerce, the e-promotion and dual-channel supply chains has become a common phenomenon in society. And the promotional strategies of dual-channel supply chain members have become a popular studying topic. In this paper, a Nash equilibrium model is used to investigate the optimal...

How to find the fire source point is the key technical point of the indoor fire-fighting robot in the operation process. The proposed low-cost comprehensive detection fire source solution using multi-sensor and surveillance camera photo recognition can successfully solve the problem that the fire-fighting...

The limited success of simplified slope stability assessment tools and concerns related to slope performance resulted in a review of an open pit mine located in South Western United States. 3D numerical was used to assess the LOM design which led to improved slope stability, while maintaining key safety...

The single-cylinder foundation for offshore wind power has significant application potential in China’s wind power industry, particularly for deep-water regions, due to its ease of installation and excellent resistance to overturning. This paper investigates the response characteristics of the soil surrounding...

First-mile and Last-Mile (FMLM) connectivity is critical to ensuring seamless integration within public transport networks. However, accessibility remains challenging due to mode availability, travel cost, and reliability. This study designs and implements a pilot study to evaluate the impact of reliability...

To address climate change and achieve carbon neutrality goals, the electric arc furnace (EAF) short process, as one of the typical production processes in the steel industry, has the advantage of energy conservation and emission reduction. Currently, research on carbon emissions mainly focuses on the...

Understanding the molecular scale and mesoscale behavior of cell adhesion proteins is highly useful in solving real-world tissue engineering problems. Therefore, the present study attempts to analyze the mesoscale behavior of adhesions through numerical simulation. The computational fluid dynamics CFD...

Face recognition is a technique that is widely used in the field of identification of a person or in the field of security. This technique basically determine the similarity on each face of a person who will be identified with the face already stored in a storage (database). In this paper the facial...

The purpose of this research is to obtain bioplastics that are biodegradable and safe if disposed of in the environment. This bioplastic is made using Empty Bunches and white rice and plasticizer. White rice flour as a source of starch with variations in the addition of chitosan additives and glycerol...

ATM machines have become a standard method for financial transactions, but they have also become vulnerable to fraudulent activities. This study presents a method that utilizes a Convolutional Neural Network (CNN) algorithm to detect ATM hammer use as a preventive measure against robberies. A novel ATM...

To manage ground displacement during unevenly loaded, deep excavation, the impact of asymmetric load on surrounding areas during multi-depth foundation pit excavation is analyzed. An example is drawn from a deep open-cut foundation pit for an underpass tunnel in Wenzhou city. FLAC3D is used to simulate...

These abstract deals with fiber yarn model simulation, a technique used to optimize realistic simulations associated with the fiber manufacturing process. Filament yarn is produced using a complex process that involves spinning the fibers into a single thick and continuous strip called yarn. The objective...

High temperature thermal energy storage units can provide the flexibility required, by storing the excess energy in the form of heat and suppling it back either into the electric grid or as heat to any energy intense industrial process. DTU Energy has constructed a vertical flow high temperature thermal...

Intrinsic safety is the inherent safety feature of an integrated enterprise system. The realization of the intrinsic safety of an enterprise depends not only on improving the safety level of “equipment” and “environment” through science and technology, but also on improving the safety quality of the...

Concrete is an important heterogeneous material used in engineering structures and infrastructure projects. Studying its mechanical properties and failure mechanism from meso-scale could provide supplementary insights for experimental research. In this study, the geometric concrete model of three aggregate...

The construction of large-span spatial truss structures faces severe challenges such as strict control of component processing accuracy, complex sectional hoisting conditions, and high requirements for synchronous sliding and unfolding. This paper studies the key technologies for the construction of...

Reclaimed concrete may successfully accomplish concrete recycling, cut down on resource waste, and advance environmental and green development. This work studies the impermeability performance of totally recycled coarse aggregate concrete by designing the mix ratio using the coarse aggregate found in...

The alternative biofuel that is inexpensive in terms of production and environmentally friendly is the development of bioethanol from agricultural wastes (biomass) which contains a lot of lignocellulose such as bagasse (solid waste from the sugar industry) and banana peel (waste from markets). One of...

Land trusteeship, as a new management mode to realize large-scale and intensive land management, has been paid more and more attention by the government and scholars. This paper develops a model to study the optimal contract of land trusteeship via principal-agent theory which is based on Tirole's...

This paper deals with design problematics of a clamping joint for the tanker frame in a rail vehicle. This car body is made from aluminum alloy. The main requirement of the joint is safe transmission the load given by the norm ČSN EN 12 663-1. At the beginning of the study is make the analysis of friction...

Waste from the tofu industry produced the pollutant like NH3, NO2, NO3 with high content that caused environmental pollution. Hence, the processing of tofu liquid waste was needed. The purpose of this research was to determine the effect on the levels of pH, NH3, NO2, NO3 and to determine the biomass...

In the context of smart operation applications for general national and provincial trunk highways, prevalent challenges include inconsistent spatiotemporal references, fragmented and heterogeneous data, incompatible interface standards, and insufficient adaptability of smart applications. These issues...

Herbal tea is a term for herb flowers, leaves, seeds, roots or dried fruit that is not derived from the tea plant (Camellia sinensis). One of the plants that can be used as herbal teas are butterfly pea (Clitoria ternatea) and ginger (Zingiber officinale). Butterfly pea is known traditionally as an eye...

To provide a simple control signal to operate residential Load–Shifting or Demand–Side–Management, the monitoring of actual grid frequency seems to be an appropriate method. Due to the present inflexibility and the lack of sufficient throttling capabilities of residual lignite and nuclear power plants,...

The paper presents the factors characterizing the non-uniformities that might occur during the technological process of making composite materials. These factors were analyzed in cases of two types of composite materials made of hybrid Dammar-base resin and reinforced with hemp and linen fabric, respectively....

The parameters that control the smooth blasting effect of tunnel driving include peripheral hole spacing, charge structure and external interpolation Angle, among which the peripheral hole external interpolation Angle is an important parameter to ensure the quality of smooth blasting. This paper uses...

To study the impact of universal parts on spare parts support probability and equipment availability, first, the calculation method of spare parts support probability is given. According to the difference in equipment and spare parts number, the change of spare parts support probability is mathematically...

In order to monitor and detect the turbid water in the shallow water channel, this paper designs a frame underwater robot. In this paper, according to the depth of diving and the thrust of the size of the frame, shell, underwater light detection, propeller and battery compartment structure distribution...

The use of lubricating oil is increasing every year the resulting waste is also increase. Based on the waste criteria issued by the Ministry of Environment, used oil is included in the category of B3 waste. Although used oil can still be used, if not managed properly, it can be dangerous for the environment....

The lateral displacement can also be induced in the piled-raft foundations (PRFs) for onshore structures in addition to vertical load on account of the excavations carried out very close to the existing PRFs. In the present study, three-dimensional numerical analyses are performed on vertically loaded...

Earthquake is one of the main external risk factors for nuclear power. Especially after the March 11 earthquake in Japan, the Fukushima nuclear power accident has attracted worldwide attention. The seismic margin of existing nuclear facilities in all countries has been evaluated. However, the seismic...

This research brings up an adapted consumer utility model based on marginal utility to describe the relationship between corporate social responsibility (CSR) and corporate development in the age of digital economy. It then conducts verification based on the controversial gambling industry in Macau....

Abstract—Aiming at various security vulnerabilities in video surveillance system, the paper proposes a vulnerability security detection method for video surveillance equipment. The method scans the TCP / IP different ports services of the target video equipment remotely, records the response content...

Slope stability study of Over Burden (OB) dump needs to be carried out for maintaining them at the steepest possible angle without any danger from the stability point of view. One of the most important input parameters for stability analysis is the shear strength i.e., cohesion and angle of internal...

Consumers, anchors, platforms, manufacturers, and other multi-type subjects constitute the value co-creators of e-commerce live streaming. The virtual presence and real-time interaction between multiple subjects and consumers through the live e-commerce scene directly convert traffic into sales and become...

In frame of De Launay model we calculated phonon dispersion of graphene in ГM direction using radial and tangential force constants for first four neighbor atoms. Calculated phonon dispersion is in satisfactory agreement with experimental phonon spectra of graphite. In long wave approximation we estimated...

Information will continue to grow in an organization, Various forms of information formed such as file documents, archives, policies, procedures, and so forth. In the current era of information technology, document management becomes an absolute thing for the organization. All business processes, activities...

Battery electric storage systems (BESS) are characterised by their fast ramping, pumped-storage plants (PSP) by their relatively larger storage capacity. In this paper the pooling of PSP (with ternary set) and BESS for the common provision of frequency containment reserve (FCR, primary reserve) is analysed....

The aim of this work is the comparison of a common storage to individual batteries for an improved use of generated photovoltaic (PV) generation for a planned residential area of 22 houses. For this purpose, a simulation tool has been developed. It compares the storage concepts regarding grade of autarky...

This paper studies the selectivity of coal by analyzing indicators such as particle size, density composition, and selectivity, in order to determine the actual production performance of the Xiaoji Khan heavy medium shallow trough. The coal screening test is a fundamental method for determining the particle...

Drag reduction over the lifting surfaces has remained a key interest of aerodynamic researchers over the last five decades, due to rising fossil fuel prices, global warming and climate change. The drag over the lifting surfaces is closely related to the required thrust and consumption of fossil fuels...

The problem of seasonal energy storage, where excess renewable energy in the summer months is stored to cater for the winter season, is an active topic being researched [1, 2]. The solution being proposed in this paper targets residential homes, and is the result of the development of a microCHP with...

Snack bar is a snack in the form of bars made from cereals or nuts, has a high protein content which is usually consumed on the sidelines of meals. Pedada fruit is one of the mangrove fruits that contain high dietary fiber, while the legumes a good source of protein, and it also contains carbohydrates,...

Inventory management is a crucial part of supply chain management and plays an important role in the business operation and development of manufacturing enterprises. The outdated inventory management methods and extensive material classification methods adopted by traditional small manufacturing enterprises...

Renewable Metal Fuels (ReMeF) have great potential to store renewable energy for several months. A thorough criteria evaluation of possible candidates was conducted, considering (1) abundance in the Earth's crust, (2) world reserves, (3) market price and its development, (4) energy density, and...

The ABAQUS software was used to establish a finite element model of the existing bridge piles for curved shield tunneling, and the impact of each stage of curved shield tunneling construction on the upper surface and adjacent pile foundations was analyzed. Research has shown that the main settlement...

In order to clarify the influence characteristics of various factors in the stability of high-fill embankments with slope foundation, the stability of high-fill embankments with slope foundation was systematically analyzed from the aspects of embankment height, pavement width, embankment gradient, slope...

This paper investigates the performance of PV/ T (photovoltaic/ thermal) system operating in air-cooling, water-cooling and dual-cooled scenarios in different climatic zones in China, and explores the effects of different coolant on the efficiency of PV/T systems, which can provide references for the...

One of the main concerns in extending variable renewable energy (VRE) is the electric grid stability due to the sources’ volatility. Germany is introducing a new auction mechanism within the German Renewable Energy Sources Act called “Innovationsausschreibung” (innovation tender) to grid- and system-supporting...

At present, in ROS core framework system, the realization of autonomous cruising and obstacle avoidance is the only way for robots to become more perfect. For this reason, this paper proposes and establishes a physical model of a two-wheel differential-driven mobile robot with nonholonomic motion constraints....

Concrete is defined as a three-phase composite material consisting of aggregate, mortar matrix, and interfacial transition zone (ITZ). To investigate the influence of various phases on the strength and damage of concrete, this research constructs a two-dimensional random aggregate model of concrete based...

In the face of the complex and fierce competition situation, it is very important and urgent to evaluate the core competitiveness of aerospace enterprises scientifically. This paper constructs the evaluation index system of the core competence of aerospace enterprises from the perspective of double capability,...

Paving Block (Conblock) is a kind of the building materials used for footing or roads. As same as bricks, paving block made from a mixture of cement, sand and water. Currently, home industries generally still use manual paving block printing tools. Where the paving block dough is put into the mold, then...

The Image analysis of fibers is a key technique in the field of materials research and industrial engineering. The purpose of this work is to present a solution for fiber image analysis using MATLAB, a high-performance software environment for numerical computations and data visualization. This work...

The manufacture of liquid smoke from the comparison of raw materials for teak and pine wood powder waste is carried out by the pyrolysis method, purified by distillation and filtration which will be applied as a preservative in food. The pyrolysis process was carried out using a reactor with a capacity...

The site-site Ornstein-Zernike equation combined with the Verlet-modified bridge function has been applied to the binary hard sphere mixtures and pressure consistency has been tested. An equa tion of state has been computed for the case where a packing fraction is η = 0.49, diameter ratios are σ2/σ1 = 0.3...

Research on lean principles in developing countries remains limited, highlighting the need for exploring alternative methods that have a positive environmental impact. One such approach is the utilization of the Value Stream Mapping (VSM) method to develop a system for waste reduction in production processes....

The hybrid pumped storage power station, utilizing an existing reservoir, is expanded by integrating reversible pump-turbine units. Its operation and scheduling are tightly coupled with the original cascade reservoirs. On the one hand, reversible units, working in tandem with conventional hydropower,...

The aging of asphalt is the main reason for the performance degradation of porous asphalt pavement. The purpose of this article is to investigate the aging behavior of high-viscosity agent / styrene-butadiene-styrene (SBS)-modified asphalt and asphalt mixtures. To this end, samples of asphalt and asphalt...

In order to ensure the freshness of fresh food and reduce the inventory of enterprises, enterprises need to predict the sales volume of tomorrow before ordering fresh chickens. The effect of the traditional model on sales forecast is not ideal, so a sales forecast based on stacking model is proposed....

Kempelang is a typical food of Palembang City. The hallmark of ths food lies in the prominent taste of fish. The use of fish will affect the distinctive taste and price of this food. Kempelang crackers are one of the small industry products that are quite popular in the community. In order for kempelang...

Helical coil heat exchanger has been widely used in hydraulics engineering, and plays an important role in modern industry. The distribution of fluid field which would be influenced by helical coil structural parameters is an important factor affecting its thermal performance. In this paper, CFD analysis...