Search all articles

+ Advanced search
Search articles within:
210872 articles
Proceedings Article

Effects of Blade Tip Foil Thickening on Tip Vortexes in Ducted Propeller

Lei Mei, Junwei Zhou
A thick tip foil blade was designed to reduce the tip leakage flow and weaken the tip vortexes in ducted propeller 19A/Ka4-55. The thick tip foil was constructed by normal extrusion of the original tip foil. The maximum thickness of the foil increased from 1.64% chord length to 7.64%. The commercial...
Proceedings Article

The Research on the control system of the autonomous vehicle for sea floor prospecting with chaotic optimization theory.

En Zou, Qing Huo, Shuihong Huang, Shengchuang Chen
In order to ensure the accuracy and precision about the trace of the autonomous vehicle for the sea floor prospecting, double- ring, series –connection closed-loop control mode is used in the paper. Fuzzy controller is used for controlling velocity in the inner-ring, and fuzzy neutral network controller...

The Study on the Status and Countermeasure of our country’s Consulting Industry Development

Yongtao Zhang
Consulting Industry is the general name of the third industry which takes consulting services as the characteristics in various industries. It essentially a knowledge service industry contains intensive intellectual. This article starts from the introduction of the development of modern consulting industry,...

Analysis of the Ability of European countries to carry on the Refugee Crisis

Wei Jiang
To solve the sudden influxes of European refugee crisis, we establish a migration model to resettle the rising number of refugees in EU with proper division. We determine metrics as the index value to describe the countries' capacity and the death rate to measure safe and efficient of movement. We select...
Proceedings Article

Research on Distribution Mode of Agricultural Products Cold Chain Logistics

Huaiyong Li
In recent years, with the adjustment of agricultural structure and improvement of resident consumption level, quantity and circulation of fresh agricultural products have been increased year by year, which results in higher demand for safety and quality of fresh agricultural products by the whole society....
Proceedings Article

Research and Application of Optimum Coding STMV Beamformer with Missing Sensors

Ping Wang, Ji-wei Tang
In this paper, we propose an optimum coding STMV beamformer to improve the performance of suppressing high peak sidelobe level with missing sensors. It considers the choices of sub-array geometry have a significant effect on the performance of STMV method using sub-array (we call it STMV-SA), and the...

An Empirical test of Economic Growth, Industrial Structure and the Urban-Rural Income Gap——based on the data of 1978-2014 years in Tibet

Duzhu Rob
Using the VAR model to 1978-2014 in Tibet economy growth, industrial structure and urban and rural residents income gap of cointegration test, impulse response function and variance decomposition analysis, the long-term cointegration relationship exists between that economic growth, industrial structure...
Proceedings Article

The research of the generalized tonic-clonic seizure epilepsy by resting state Fmri

Ming Ke, Xiaoxin Duan, Fan Zhang, Xiaoping Yang
In this study, we investigated the human brain functional network of patients with generalized tonic and clonic seizure (GTCS) epilepsy by using the resting-state functional magnetic resonance imaging (fMRI) and complex network theory. Adjacency matrices of the networks of GTCS group and normal control...

Size and Location Diagnosis of Rolling Bearing Faults: An Approach of Kernel Principal Component Analysis and Deep Belief Network

Heli Wang, Haifeng Huang, Sibo Yu, Weijie Gu
Pages: 1672 - 1686
Diagnosing incipient faults of rotating machines is very important for reducing economic losses and avoiding accidents caused by faults. However, diagnoses of locations and sizes of incipient faults are very difficult in a noisy background. In this paper, we propose a fault diagnosis method that combines...
Proceedings Article

Real Time Traffic Signal and Route Optimization

K. Pushpavalli, N. S. Kishanraj, S. Lingesh, K. ArunPrasad
This paper presents Traffic, a real-time intelligent traffic signal monitoring and route optimization system. The application integrates live traffic signal data with route optimization algorithms to provide efficient navigation for commuters. The solution is built using a React frontend, Node.js backend,...

The Influence of Female Consumer Psychology on the Experience-based Economy

Taking Chinese women as an example

Ruoyao Li
With the rise of women’s status and their essential status in economic development, women’s consumer psychology has become one of the vital factors influencing the development of the new experience economy. Respecting women’s needs and catering to women’s consumer psychology has become crucial links...

Geographical distance, Fintech and Leasing Contract Design

Analysis Based on Linear Models

Ting Yang, Xinyu Wang, Tongxin Zhang, Zhijun Wang
It has been proved that geographical distance has a certain impact on distance market transactions, but there are still few studies systematically elaborating whether geographical factors have an impact on financial contract. Based on the data of geographical distance and fintech index , the empirical...
Proceedings Article

Overview of Quantum Information Technology in Satellite Networks

Yuan Gao, Hong Ao, Quan Zhou, Weigui Zhou, Yi Li
Quantum theory of information science from germination and now has nearly 30 years of history, mainly includes three aspects: (1) quantum communication can be achieved theoretically unconditionally secure transmission of information; (2) quantum computing with ultra-fast computing power; (3) quantum...
Proceedings Article

Research and Practice of Entrepreneurship Education in "Tutor + Project + Team" Model in Colleges and Universities

Rui Li, Pengzhong Dong
The development of entrepreneurial education in colleges and universities is of great significance to the employment of high school students and the employment of college students. Should be based on the concept of team-based entrepreneurship education, adhere to the combination of entrepreneurship education...
Proceedings Article

Research on the innovation model of the old industrial building renovation under the concept of Ecology ——Xi'an -- a case study of 1935 Dahua

Le Li, Yitong Shen, Xiangxin Meng
This article emphasize the ecological planning concept to maintain characteristics of urban old industrial district which will lead to a sustainable development. Including construction request of modern architecture from architecture design, architecture culture, architecture land resource, architecture...
Proceedings Article

The Impact of Human Capital on the Beijing Economic Growth

L.L. Hou, X.J. Wang
By regression analysis of relevant data in Beijing from 1993 to 2013, this article tries to figure out that the impact of Beijing’s human capital investment growth for its economic growth. The empirical result shows that Beijing’s economic growth based on the common growth of its physical capital and...
Proceedings Article

Review on Public Crisis Management

Jiemin Huang
Many foreign scholars studied for the definition of the crisis. Rosenthal, who believe that the crisis is the basic mechanism of a framework and code of conduct of a serious threat to the social system, and the event at extremely high pressures and uncertainty in the event of the case must be made key...
Proceedings Article

A Plant Growth Simulation Algorithm for solving nonlinear equation group

Zhengen Fan, Yueguang Li
In this paper, according to the problems such as high sensitivity to the initial guess of the solution and poor convergence reliability of the classical algorithms used to solve nonlinear equations, a Plant Growth Simulation Algorithm(PGSA) was put forward, and it was used to solve the systems of nonlinear...
Proceedings Article

Mechanical properties analysis of CFRP tie bar based on ANSYS

Xingkai Chen
Carbon fiber reinforced plastics (CFRP) have high strength-to-weight ratios, high stiffness-to-weight ratios and high reliability, which leads to the wide application of CFRP in various fields. In this paper, CFRP tie bar was formed by resin transfer molding (RTM), and finite element analysis (FEA) was...
Proceedings Article

The Design of PLC Entrance Guard System Based on RFID Technology

Zhengjie Zhou
With the rapid development of social economy and science and technology, rfid technology is more and more widely applied in various industries, especially the identification and security industries, entrance guard system as an important unit of the intelligent building is more and more get attention....
Proceedings Article

The Design and Improvement of a Fuzzy Controller Based on a Single Inverted Pendulum

Xiuyun Li, Yanjun Ren
This paper has introduced the main characteristic and some current re-searches about the inverted pendulum system. A nonlinear mathematical model of invert-ed pendulum is established based on the newtonian dynamics method. Then the design of traditional fuzzy controller is presented, the result of simulation...
Proceedings Article

Stability Study of Single-abrasive Coupled Flutter in Ultrasonic Vibration Honing

Xiao Qiang Zhang, Xi Jing Zhu, Ling Long Cheng
Flutter, a seriously dynamic and severe self-excited vibration, easily exists in mechanical processing system, is a major factor, impact the workpiece surface quality and machining efficiency. It has been the main research to explore the resource, analysis the mechanism and pursue restraining method...
Proceedings Article

A brief analysis of the bridge between sports and The environment -- Ecological Sports

Zhao Peng, YaWei Song
This paper mainly uses literature survey to summarize the concept and connotation of ecological sports from different scholars and the related concepts of ecological sports. First, it describes the application of ecological sports in Olympic, school sports, Chinese traditional sports and outdoor activities....

Comparative Study of the Definitions of Extroversion Chinese Learning Dictionaries

Na Yan
This paper focuses on the definition of extroverted Chinese dictionaries. Based on the eight extroversion-oriented Chinese dictionaries published in recent years and the practice of teaching Chinese as a foreign language, this paper discusses the interpretation and a series of practical measures were...
Proceedings Article

Research on the Planning System of Applied Professional Degree Graduate Students' Teaching Materials

Shoujin Wang, Junling Liu, Huanliang Sun
This paper aims at meeting the needs of China's application-oriented talents and achieving high-level application-oriented personnel training objectives. The construction of professional materials is the basis of the cultivation of applied talents. Therefore, to establish a set of high-level application-oriented...
Proceedings Article

Short-term Forecasting of High-Speed Rail Passenger Flow

Pei Zhang, Xiao-Long Li, Qin-Zhao Wang
Short-term forecasting of high-speed rail (HSR) passenger flow is the key to high-speed passenger rail planning decision-making. Furthermore, accurate short-term demand estimates are sure to success of rail revenue management. Different station passenger flow is effect each other, however, previous researches...
Proceedings Article

The Study on the Gear Shifting Strategy for 2-speed Planetary Transmission of Plug-in Electric Buses

Jun-qiu Li, Meng Lu, Ya-qi Zhu
The shift logic of most automatic shift systems is based on two parameters-vehicle speed and throttle opening. In this paper, two-parameter shift schedule is applied for AT. The shift logic is on the basis of the optimal efficiency of the motor-transmission system. The model is built by Simulink/Stateflow...
Proceedings Article

Optimizing Spectrum Allocation for UAV Networks: A Comprehensive Approach to Frequency Management and Interference Mitigation

Logachandru Rajinikanth, A. Hema Malini
Cost and communication challenges: High deployment of remote-controlled aerial drones in urban regions and crowded airspace have presented another challenge to overcome in achieving high deployment numbers in urban spaces as well as densely populated airspace from such remote-controlled aerial drones....

Knowledge of Children Related to Reproductive Health to Prevent Child Sexual Abuse in Elementary Schools

Oktavia Nur Indaryati, Murfiah Dewi Wulandari
To reduce the prevalence of sexually abusive behaviors toward children, the objective of this research was to assess the degree of the information held by students regarding reproductive health and readiness for puberty. This study uses quantitative research methods. Data collection is done through a...

Study on Language Deep Learning by DDL under the Circumstances of A.I.

A Comparative Analysis of Chinese and Korean English Learners’ Corpus

Jinrong HOU
Artificial intelligence (AI) improves the progress of educational concepts, accelerates the educational reformation, promotes the development of educational technology, changes the teaching and learning methods. In the field of second language acquisition, data-driven learning contributes to the language...

Differentiated Instruction Implementation: A Survey Study Among Elementary School Teachers

Muhamad Nanang Suprayogi, Budi Sulaeman, Baydhowi Baydhowi
The students in the classroom come from various characteristics and backgrounds. Dealing with this diversity of students, the teacher needs to apply multiple teaching strategies and learning activities, rather than using One Size Fits All (OSFA) teaching strategy. Many authors suggest applying Differentiated...

Opportunities and Challenges of Economic Development in The Era Of Big Data

Yunxi Nie
In the context of the era of big data, social and economic development and innovation models are changing. The development of the world has created many new opportunities for social and economic development, but it has also inevitably brought many burdens and challenges. Keeping pace with the times and...

Introduction and Importance of 1964 Alaska Earthquake

Lelin Sun
The 1964 Alaska Earthquake is the largest earthquake in U.S. history. Even after decades, it still has a huge impact in the field of geology and seismology. This disaster and following consequences in the local area and around the world had made great contributions to science society as an outstanding...

Research on satisfaction evaluation of innovation and entrepreneurship education in medical colleges

Jie Liang, Lufeng Li
This paper constructs an evaluation index system of innovation and entrepreneurship education satisfaction in medical colleges from the perspectives of school management, curriculum design and entrepreneurship and innovation practice. The research shows that the degree of satisfaction with innovation...
Proceedings Article

An Improved Algorithm for Dv-Hop Based on Hops Correction

Yujian Wang, Kaiguo Qian, Sunyan Hong, Chunfen Bu
For the disadvantage which is larger positioning error, the RSSI signal strength is used to calculate the hops between the sensors which make it more close to the real network; Meanwhile, the hyperbolic method is adopted to improve the unknown node location which eliminates the cumulative error and improves...
Proceedings Article

Study on Electrical Performance of FC and WB in IC Ceramic Package

Dejing Wang, Yuanfu Zhao, Quanbin Yao, Yusheng Cao, Binhao Lian, Hongshuo Zhang
As the signal frequency of integrated circuit keeps increasing, parasitic effects caused by the interconnect transmission structure used in IC ceramic package is becoming important factor which will influence the transmission performance of the signal path. In this paper, parasitic parameters (Resistance,...
Proceedings Article

An observer deployment algorithm for locating the diffusion source timely in social network

Yubo Zhang, Xizhe Zhang, Bin Zhang
Locating the source of information diffusion on the social network is a challenging and significant task. It is important to control the spread of wrong information on the social network. An existing method is to observe a few nodes in the network and estimate the location of the source from the data...
Proceedings Article

Methods and Approaches for the Modeling of Spiral Bevel Gear

Hongbin Yang, Rongda Yao
Accurate modeling of spiral bevel gear laid the foundation of the key technology namely Tooth Contact Analysis TCA and correction of the deviation of tooth-surface in its digitized manufacturing. It summarized the related outcomes and divided modeling approaches of the tooth-surface of spiral bevel gear...
Proceedings Article

The Research on Sports Training Aids System Based on Data Warehouse Technology

Yan Liu, Xiaofang Liu
With the rapid development of computer technology and the business community have made new demands, data warehouse technology is introduced. Traditional database technology is a single source of data, that database will be mainly engaged in transaction processing, batch processing to decision analysis...
Proceedings Article

Design and Implementation of Teaching and Examination System for Computer Application

Yan Zhang
With the arrival of information era, modern society has to rapidly spread and take advantage of a dazzling array of information resources and the knowledge update cycle is becoming shorter. Therefore a teaching system is desperately needed to full play education resources, maximize resources sharing,...
Proceedings Article

Research on operation of new rural cooperative economic organizations in China

Li Liu
After the reform and opening up, with the development and improvement of Chinese market economic system, the new type of rural cooperative economic organizations emerged which mainly solve the contradictions between farmers and the market and take into account the social and environmental objectives...

The Realization of Blended Teaching Model Based on Gradually Penetrative Method

Xiuzhen Hu, Jing Pang, Weiguang Zhang, Riguleng Si, Rigen Mo
With development of assistant effects of the Internet plus in the education, assistant teaching methods, such as Micro course and MOOC gradually become part of course design. Blended teaching model basing on the Micro course becomes hot spot of education reform. However, it is a worth exploring question...
Proceedings Article

Effects of Different Concentrations of Selenium on Antioxidant Enzyme Activity of Pterocypsela laciniata

Dandi Xu, Yuzhi Wei, Yue Gao, Lijin Lin, Zitong Wang, Yifei Zheng
The effect of different selenium concentrations on the antioxidant enzyme activity of Pterocypsela laciniata was studied by pot experiment. The results showed that the effects of different selenium treatments on P. laciniata were significant. With the increase of selenium concentration, the trend of...
Proceedings Article

Methods in Solving the Wave Equations for A Loudspeaker

J. Zeng, H. Wang, J.Y. Dong
This paper introduces several methods in solving the wave equations for a loudspeaker. The separation of variables method is very common for solving constant coefficient linear partial differential problems. The finite difference method has been the main method of numerical computation in early work....

Analysis of Cost Structure and Control of E-Commerce Enterprises - Taking Meituan as an Example

Guangxuan Wu, Weiqun Wang, Liang Xu
E-commerce, as a mainstream business model in the 21st century, has developed rapidly in China in the past two years. Various shopping websites have provided consumers with a large number of goods. However, the logistics management system is not perfect enough to keep up with the development speed of...

The Implementation of E-Samsat and Its Socialization on Compliance with Motor Vehicle Tax Payments

Muhammad Nordiansyah, Polina Nalistia Irawan
This study examines how E-Samsat’s implementation and socialization have affected motor vehicle tax compliance. E-Samsat as part of the implementation of e-government, is a digital technology innovation designed to simplify the motor vehicle tax payment process and improve administrative efficiency....

A Comparative Analysis of Traditional Teaching and PBL Model

Le Bo, Xiaoxiao Ding, Sihan Wang
The “Teacher-Centered” approach is one of the most widely used teaching methods in traditional Chinese teaching.The teacher is mainly on imparting knowledge, and studentsare only playing the role of listening most time who hardly participate in the teaching process. By adopting this teaching method,...

Design and practice of teaching Civics in the course of Film and Television Directing

Shuo Chen, Ying Zhao
Civic education into the professional curriculum is a key initiative to implement the fundamental task of establishing moral education, and the construction of the curriculum Civic Science is also an important guarantee to improve the talent training system and adapt to the needs of social development....
Proceedings Article

Design and Application of Quality Traceability System Based on Improved Production Process of Cigarette Packaging

Mengshi Fan, Chengkun Xu, Li Chen, Jianfeng Xu, Zhaoshun Li, Zhenhan Zhang, Baocheng Hu, Bei Cao, Wen Zou
As most of the finished tobacco products are only sprayed with two-dimensional codes and the frequency of scanning is low, it is not national unified standard, and no correlation among the pack, carton, and box of tobacco products. The study of combing two-dimensional codes and radio frequency tags helps...

The development of modern Jingdezhen ceramic school vocational education enlightenment

Xiu-mei Wu
Qing guangxu twenty-nine years (in 1903), the governor of jiangxi province ke time to the qing government suggested "revitalization of the craft, and poly rights", and making the hubei alternate way Sun Tinglin "so China company, raise two dial the silver to interface, more shall be set by the way, have...