Proceedings of the 10th International Conference on Science and Technology (ICST 2024)

Performance of the Pumpkin Wind Turbine

Authors
Toto Rusianto1, *, Saiful Huda1, Angge Dhevi Warisaura2, Andrean Emaputra3
1Department of Mechanical Engineering, Institut Sains Dan Teknologi AKPRIND, Yogyakarta, 55222, Indonesia
2Department of Environmental Engineering, Institut Sains Dan Teknologi AKPRIND, Yogyakarta, 55222, Indonesia
3Department of Indutrial Engineering, Institut Sains Dan Teknologi AKPRIND, Yogyakarta, 55222, Indonesia
*Corresponding author. Email: toto@akprind.ac.id
Corresponding Author
Toto Rusianto
Available Online 1 July 2025.
DOI
10.2991/978-94-6463-772-4_46How to use a DOI?
Keywords
Wind turbine; pumpkin; ireng; energy; blade
Abstract

This paper reports existing studies on the influence of the number of blades on vertical axis wind turbine (VAWT) performance. Wind turbine blade is an important element in the conversion of wind energy to electrical energy, because of their ability to convert wind kinetic energy, even at low wind speeds. Therefore, the choice of airfoil-shaped wind turbine blades is very suitable for application in areas with low wind speeds. The VAWT blade installed resembles a pumpkin when it spins, so is called a pumpkin wind turbine. The blades were installed on VAWT with various 2, 3, 4, and 5 blades, while the performance of the wind turbine was determined with various wind speeds, respectively. The successful manufacture of blades can be an advantageous solution for vertical wind turbines. The turbine with three blades has the largest tip speed ratio (TSR) of 4.08. The test results of this pumpkin wind turbine show the maximum efficiency power expressed in Cp of 0.49 with the number of three blades. For application, a vertical pumpkin wind turbine with a stand- alone has been installed for lighting in Mount Ireng in Pengkok Village Patuk Gunung Kidul Special Region of Yogyakarta.

Copyright
© 2025 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the 10th International Conference on Science and Technology (ICST 2024)
Series
Advances in Engineering Research
Publication Date
1 July 2025
ISBN
978-94-6463-772-4
ISSN
2352-5401
DOI
10.2991/978-94-6463-772-4_46How to use a DOI?
Copyright
© 2025 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Toto Rusianto
AU  - Saiful Huda
AU  - Angge Dhevi Warisaura
AU  - Andrean Emaputra
PY  - 2025
DA  - 2025/07/01
TI  - Performance of the Pumpkin Wind Turbine
BT  - Proceedings of the 10th International Conference on Science and Technology (ICST 2024)
PB  - Atlantis Press
SP  - 519
EP  - 528
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-772-4_46
DO  - 10.2991/978-94-6463-772-4_46
ID  - Rusianto2025
ER  -