Proceedings of the 10th International Conference on Science and Technology (ICST 2024)

<Previous Article In Volume

Design of Sievert Type Apparatus: Cooling Mode Heat Transfer Analysis in Hydrogen Sievert Apparatus

Authors
Hifni Mukhtar Ariyadi1, 2, Robertus Dhimas Dewangga Putra1, 2, *, Burhan Febrinawarta1, 2, Agung Nugroho3, Hanida Nilasary4, Haryo Satriya Oktaviano4
1Department of Mechanical and Industrial Engineering, Faculty of Engineering, Universitas Gadjah Mada, Jl. Grafika No. 2 , Yogyakarta, 55281, Indonesia
2Centre for Energy Studies, Universitas Gadjah Mada, Sekip Blok K1-A, Yogyakarta, 55281, Indonesia
3Department of Chemical Engineering, Universitas Pertamina, Jalan Teuku Nyak Arief, Simprug Kebayoran Lama, Jakarta, 12220, Indonesia
4Downstream Research and Technology Innovation, Research and Technology Innovation, PT Pertamina (Persero), Sopo Del Tower A Floor 51, Jakarta, 12950, Indonesia
*Corresponding author. Email: robertus.dhimas.d.p@ugm.ac.id
Corresponding Author
Robertus Dhimas Dewangga Putra
Available Online 1 July 2025.
DOI
10.2991/978-94-6463-772-4_58How to use a DOI?
Keywords
Sievert Type Apparatus; CFD; SSHS; Analytical lumped capacitance method; Poros carbon
Abstract

Porous carbon is one alternatives material to store hydrogen through adsorption mode known as solid state hydrogen storage (SSHS). The capacity of this SSHS could be analyzed using volumetric technique, measuring the changing of pressure at known volume and temperature. The measurement equipment using this technique is known as sievert type apparatus. In this work heat transfer analysis was conducted during the design of sievert type apparatus to ensure no gradient temperature or could spot in the apparatus as well as to analyze the time vs cooler flow rate for the targeted measurement temperature. Two analyses were carried out using analytical lumped capacitance method and numerical computational fluid dynamics (CFD). The findings indicate that increasing the mass flow rate from 0.01 kg/s to 0.25 kg/s leads to a substantial reduction in cooling time, decreasing it from 3250 s to 250 s. However, further increasing the mass flow rate beyond 0.25 kg/s does not significantly decrease the cooling time. The maximum heat transfer rate is 700 W and achieving the target temperature with a coolant flow rate of 50 g/s takes only 380 s when using a numerical approach with CFD, which is faster than the analytical results.

Copyright
© 2025 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

<Previous Article In Volume
Volume Title
Proceedings of the 10th International Conference on Science and Technology (ICST 2024)
Series
Advances in Engineering Research
Publication Date
1 July 2025
ISBN
978-94-6463-772-4
ISSN
2352-5401
DOI
10.2991/978-94-6463-772-4_58How to use a DOI?
Copyright
© 2025 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

risenwbib
TY  - CONF
AU  - Hifni Mukhtar Ariyadi
AU  - Robertus Dhimas Dewangga Putra
AU  - Burhan Febrinawarta
AU  - Agung Nugroho
AU  - Hanida Nilasary
AU  - Haryo Satriya Oktaviano
PY  - 2025
DA  - 2025/07/01
TI  - Design of Sievert Type Apparatus: Cooling Mode Heat Transfer Analysis in Hydrogen Sievert Apparatus
BT  - Proceedings of the 10th International Conference on Science and Technology (ICST 2024)
PB  - Atlantis Press
SP  - 649
EP  - 658
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-772-4_58
DO  - 10.2991/978-94-6463-772-4_58
ID  - Ariyadi2025
ER  -