Proceedings of the International Conference on Tropical Studies and Its Application (ICTROPS 2024)

The Effect of Substituting Fine Aggregate with Petroleum Drilling Mud Waste in Eco-Paving Block Manufacturing

Authors
Fahrizal Adnan1, Indra Ariani1, Budi Nining Widarti1, Febrina Zulya1, I Gusti Ngurah Ary Pramana Adiguna1, *
1Mulawarman University, Samarinda, East Kalimantan, 75119, Indonesia
*Corresponding author. Email: gustingurahary@gmail.com
Corresponding Author
I Gusti Ngurah Ary Pramana Adiguna
Available Online 7 June 2025.
DOI
10.2991/978-94-6463-732-8_25How to use a DOI?
Keywords
Compressive Strength Test; Paving Block; Petroleum Drilling Mud; Physical Characteristics Test; Water Absorption Test
Abstract

Petroleum is one of the fuels still widely used in Indonesia for vehicles. Petroleum exploitation activities produce residue or waste material in the form of unused petroleum drilling mud, which, if not utilized, can become waste. This research used the mud from petroleum drilling into valuable products such as paving blocks. This research uses an experimental method with paving block test objects measuring 20 × 10 × 6 cm3. Utilization of petroleum drilling mud is a partial substitution of fine aggregate in manufacturing paving blocks with a percentage variation of 0%, 10%, 20%, and 30%. Tests on petroleum drilling mud include XRF (X-ray fluorescence) and physical characteristics tests. Tests on the specimens were conducted 28 days following SNI 03–0691-1996 on paving blocks in the form of compressive strength and water absorption tests. The results showed that the 30% percentage variation was the best in the compressive strength and water absorption tests. The average compressive strength test results of 0%, 10%, 20%, and 30% percentage variations were 23.9 MPa, 30.2 MPa, 30.5 MPa, and 33.8 MPa, respectively. The average water absorption test results were 7.55, 7.49, 7.07, and 6.66.

Copyright
© 2025 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Download article (PDF)

Volume Title
Proceedings of the International Conference on Tropical Studies and Its Application (ICTROPS 2024)
Series
Advances in Engineering Research
Publication Date
7 June 2025
ISBN
978-94-6463-732-8
ISSN
2352-5401
DOI
10.2991/978-94-6463-732-8_25How to use a DOI?
Copyright
© 2025 The Author(s)
Open Access
Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License (http://creativecommons.org/licenses/by-nc/4.0/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

Cite this article

TY  - CONF
AU  - Fahrizal Adnan
AU  - Indra Ariani
AU  - Budi Nining Widarti
AU  - Febrina Zulya
AU  - I Gusti Ngurah Ary Pramana Adiguna
PY  - 2025
DA  - 2025/06/07
TI  - The Effect of Substituting Fine Aggregate with Petroleum Drilling Mud Waste in Eco-Paving Block Manufacturing
BT  - Proceedings of the International Conference on Tropical Studies and Its Application (ICTROPS 2024)
PB  - Atlantis Press
SP  - 275
EP  - 284
SN  - 2352-5401
UR  - https://doi.org/10.2991/978-94-6463-732-8_25
DO  - 10.2991/978-94-6463-732-8_25
ID  - Adnan2025
ER  -