Advances in Engineering Research

+ Advanced search
29104 articles
Proceedings Article

Research on high water temperature of diesel engine and improvement of radiator

Jian Huang
For a water-cooled engine, radiator performance has a direct impact on automobile engine heat dissipation effect, influence the automobile's power performance, economy and reliability. Based on the 6DL engine high temperature problems are investigated, analyzed the reasons of high temperature of the...
Proceedings Article

Word Semantic Variation Mining based on Pos-Word2vec and cloud-model

Maoyuan Zhang, Xiaohang Pan, Qiongyao Meng
Words, as the basis of language, have relative stability.But it is also gradually developing. The language variation and change has been an important subfield in sociolinguistics, and has made remarkable achievements.But there is seldom research conducted from the aspect of the natural language processing.This...
Proceedings Article

An Optimized Preparation Method to Obtain High-quality RNA from the Buds of Sunflowers

Hao Feng, XiBao Ma, Jun Yang
In an attempt to isolate high-quality, total RNA from flower buds of sunflowers (Helianthus annuus). We have already improved the SDS method. After adding liquid nitrogen, we have to grind the material down. After that we add protein -DNA precipitation, wash it with the addition of different kinds of...
Proceedings Article

Study on Cracking of Steel Lined Reinforced Concrete Penstock Based on Continuous - Discontinuous Method

Hailin Wu, Liangcai Zhu, Fubing Cui, Zhiqiang Zheng
The numerical simulation of steel lined reinforced concrete penstock model of a hydropower station is carried out by continuous-discontinuous numerical method (extended finite element method). This paper focuses on the numerical calculation method of the crack process and the crack width of the concrete...
Proceedings Article

The Site Selection Optimization of the Jointed Rock Masses Cavern in the Mountain with Different Slope Degree

Bangxiang Li, Weishen Zhu, Chao Li, Dunfu Zhang, Hao Zhou
A study on distribution characters of initial stress in the condition of gravity effect in the slopes within alp of which the slope angles poses 30° 45° 60° respectively were conducted by numerical analysis. After comparison, it is found that when closing to the region of slope surface, the difference...
Proceedings Article

Evaluation of the Balance of Water Resources in Multiple Spatial Scale Based on Lorenz Curves and Gini Coefficients

Haizhen Liu, Xuefeng Sang, Ziqi Yan, Zuhao Zhou, Jianguang Su, Gang Chen
Influenced by special topography and three-dimensional climate, the distribution of water resources in Yunnan Province is obviously different form other regions. According to the official reports of water resources, related evaluations and planning in Yunnan Province in 2012, the interaction cutting...
Proceedings Article

Study on the Accumulation of Heavy Metals in Alpinia Oxyphylla Miq. at Different Growth Stages

Dan Zhou, Yurong Fu, Weiyong Lai, Junqing Zhang
Objective: to compare the contents of heavy metals in Alpinia oxyphylla Miq. at different growth stages. Methods: The content of Cu was determined by atomic absorption spectroscopy. The contents of other four elements, i.e. As, Hg, Pb and Cd, were determined by atomic fluorescence spectroscopy. Result:...
Proceedings Article

Some Aviation Equipment Fault Diagnosis Application Analysis of One Advanced FCM Cluster Algorithm

Libin Yang, Guangyi Zhang, Yanqin Su
There is the vague boundary between fault omen and fault phenomenon of aviation equipment, one Fuzzy C-means (FCM) cluster method is given to divide the fault classification, which provide some help to determine the next fault mode.
Proceedings Article

Study and Development of Process Material Fiber Board from Sugar Cane Leaf in Applied Product Design for Sugar Cane from Agriculturist Thai

Songwut Egwutvongsa, Somchai Seviset
This research has objectives as this following: 1) to study the properties and quantities of the leave-buds and the leaves of sugar cane 2) to develop the transformation process of the leave-buds and the leaves of sugar cane as the materials replacing of wood 3) to test the replacing material standard...
Proceedings Article

Design of online detection system of gathering machines based on machine vision

Yingjie Tang
An online detection system is designed for gathering machinesto solve theproblems ariseincollating. The system consists of industrial digital cameras and industrial control computer to form a distributed control system that uses Ethernet to communicate information between host computer and slave computer.Using...
Proceedings Article

A Supplement of GFEDF Based on Water Splitting for Hydrogen Fuels

Guangzai Nong, Douyong Min, Yongjun Yin, Hongxiang Zhu, Chengrong Qin, Jiulong Sha, Shuangfei Wang
Hydrogen fuel is a kind of clean energy that can be generated by photo catalyzing water splitting. It is interesting to investigate the case contrasting to Gibbs free energy determination formula (GFEDF). Through calculation and theoretical analysis, results are: (1) there is not electric energy and...
Proceedings Article

Study of Pre-Stressed Concrete Girders Planning on Flyover Project Overpass Bridges Mahakam IV Samarinda City

Mardewi Jamal, M. Jazir Alkas, Supriyadi Yusuf
A pre-stressed concrete bridge is a construction structure that connects a place to another place that is made by giving a voltage opposite the voltage caused by an external load. The process of giving tension can be carried out before the concrete is printed (pre-pull) or after the concrete is printed...
Proceedings Article

Development of a New Type of Direct Current Generator of High Power on the Basis of Permanent Magnets

I.M. Daudov, S.S. Yusupov, I.P. Beriev, T.S. Bagatyrev, R.S. Dataev
The article presents the development project of a device, namely a generator of innovative principle of generating electrical energy, in other words, the development project of an innovative source of electricity.
Proceedings Article

Research into Power Distribution Network Condition Evaluation Method Based on Equipment Health Index

Xiao-ping Yang, Rong Wang
To evaluate the health status of the power distribution network is of vital importance to condition-based maintenance of the power distribution network. By studying the power distribution network health condition using the theory of health index (HI), this paper proposes a method to evaluate the power...
Proceedings Article

Sea Level Variability Around Belitung Using Satellite Altimetry

Hariyadi, Eko Handoko, Muhammad Yusuf, Johannes Hutabarat, Denny Sugianti, Anindya Wirasatriya
The Sea around Belitung Island is an oceanic pathway for the South China Sea and the Java Sea which has some characteristics. This paper addresses to determine sea level variation around Belitung Island using satellite altimetry observation. Several parameters applied to determine sea level anomaly....
Proceedings Article

Optimal Design of Hybrid Renewable Energy Generation Sources Integrated with Battery Energy Storage System; A Case Study of Nongplathao Park, Chaiyaphum Provincial Administration Organization, Thailand

Montre Chaleekure, Terapong Boonraksa, Nitikorn Junhuathon, Boonruang Marungsri
Hybrid renewable energy began to play an essential role after the fossil energy is gradually reduced. In Thailand, the government is very interested in renewable energy, and there are many potential areas in countries where renewable energy sources such as wind energy and solar energy are available....
Proceedings Article

Motor Side-View Recognition System Based on Wavelet Entropy and Naïve Bayesian Classifier

Yiyang Chen, Маtbеn Suchkov
As the traffic accident becomes a serious problem, we need some more efficient methods to identify the car. Luckily, we can use artificial intelligence to recognize the motors by using side-view images. It will help a lot to solve the traffic accident. We used the wavelet entropy to extract the feature...
Proceedings Article

Quality Assessment of Road Pavement using Lightweight Deflectometer

Siti Isnaini Kurniawati Djaha, Hakas Prayuda
Quality assessment in existing road pavement is used to decide the right action for road preservation. In Indonesia, the quality is measured by functional parameter in riding quality using International Roughness Index (IRI) and visually using Pavement condition Index (PCI) to evaluate pavement condition....
Proceedings Article

Time-Dependent Reliability of Concrete Structure in Chloride Environment

Qiong Ming JIANG, Kai SHI, Sheng Ning LAN
In this paper, the age factor of chloride diffusion coefficient of concrete is considered, as well as the randomness of the chloride diffusion coefficient, concrete cover depth, surface concentration, threshold concentration and age factor. Based on the First Order Reliability Method, a time-dependent...
Proceedings Article

Development of Water Flowing Fractured Zone Caused by Fully Mechanized Top Coal Caving in Xin’an Coal Mine

Changxiang Wang, Ning Jiang, Yao Lu, Buchu Zhang, Wenbo Wang, Chuanping Sun
Taking Xin’an coal mine as an example, through empirical formula, regional analogy, theory analysis and analog simulation experiment, predicted the high of water flowing fractured zone under the condition of fully mechanized top coal caving, used monitoring system to measure the height of water flowing...
Proceedings Article

Experimental Study on Performance Parameters of Semiconductor Refrigeration Garment for Different Working Conditions

Li-Feng REN, Li MA, Chang-Chun LIU, Xi-Mei DING
Hot and humid environments are ubiquitous in some special workplaces, such as deep mines, aviations, and military territories. High–temperature radiation is a serious threat to the health of high temperature operation personnel. Exposed to high temperatures for a long time will inevitably lead to dehydrations,...
Proceedings Article

The Effect of Incubation Time on Fermentation of Cassava Bagasse by Trichoderma Mutant

ALI Mulyono, Kevin Andika, Sri Sukaryani
Penelitian bertujuan untuk mempelajari pengaruh lama inkubasi pada fermentasi onggok menggunakan Mutan Trichoderma AA1. Empat level lama fermentasi yang meliputi 0 (kontrol), 1, 2, dan 3 minggu diperlakukan untuk fermentasi onggok. Percobaan dirancang dengan One-way classification of Completely Randomized...
Proceedings Article

Research on Smelting Process and Submerged arc Furnace for Silico-calcium Alloy

Wei Lin
With the comparision of smelting process technology and submerged arc furnaces for silico-calcium alloy at home and abroad, it is seen that the development of large capacity arc furnace technology for silico-calcium alloy is necessary and urgent in China.
Proceedings Article

A High Precision Electronic Scale Based on STM32

JiaHui Chen
A kind of high precision electronic scale with STM32F103 as the control core is designed. Mainly by the resistance strain gauge, operational amplifiers, ADC and other functional modules. Strain gages of the bridge circuit will be based on the pressure of different output voltage, through the amplifier...
Proceedings Article

A study on pearlescent performance of green black coating layer on micron glass

Ji-Cong Pei, Yan Huang, Xiao-Yu Han, Yu-Xiang Yang, Xiang-Nong Liu
Preparation of pearly green black pigment (micron glass/nano-Fe3O4) can be carried out by a green process: eroding the micron dimension glass first, then second co-precipitating ferrous and ferric ions on the eroded substrate, which should minimize long and short-term impacts on the environment. The...
Proceedings Article

The Numerical Solution of an Inverse Two-Phase Stefan Problem

Tingting Li, He Yin, Quangang Wen
In this paper, the author studies an inverse two-phase Stefan problem obtained from a one-dimensional model of ice melting. This problem can be reduced to solve two hot-conduction equations. One is posed, so we can use the difference approximation method to solve it. The other is ill-posed. We first...
Proceedings Article

Design and Implementation of Judge System for Old Man Fall Down

Chao Sun, Jindong Zhang, Jiajia Lin, Rui Song, Xuan Zang, Xiaohan Liu
This paper taking into account the universal use of Android phones, designs and implements judgments and notices the old man falling cell phone App. By calling the phones accelerometer, gyroscope collection campaigns after processing according to human body dynamics model to determine the specific state...
Proceedings Article

Hydrodynamic Analysis and Modeling of Nozzle for Particle Jet Impact on Rock Broken

Xiao-ze Cheng, Fu-shen Ren, Tian-cheng Fang
Particle impact drilling is a kind of rock breaking method, that high speed metal particles and fluid were given priority to be used to jointly break rock, and mechanical drill bits were supplemented. It is an effective means to solve the hard and abrasion-resistant drilling problems in deep and ultra-deep...
Proceedings Article

Memory Management System Based on Inverted Page Table with Hash Technology

Haoyu Yang, Linying Gong, Yuping Yuan
Faced with the development of information technology and the arrival of the era of big data, dynamic memory management is one of the most important operations in many C/C++ applications. Traditional paging memory management apply page table which aims at process. When the address of the process is large,...
Proceedings Article

Lesson from Vernacular Tobacco Barn: A Passive Design Strategy for Energy-Independent Building

Andika Citraningrum, Daning Herawati
Gudang Atag is one of Indonesia’s vernacular buildings, which is a characteristic of the Na-Oogst tobacco plantation as raw material for cigars. This tobacco barn can produce tobacco leaves with quality that conforms to the standard using the process of air curing. Air curing is the process of drying...
Proceedings Article

The Design of Infusion Monitoring System Based on AT89C51

Jianjun Zhang
Intravenous fluid infusion is an effective treatment for patients, but it requires monitoring by nurses or family members. We design a monitoring system based on AT89C51 to solve monitoring problems and avoid medical accidents. We use infrared sensors to monitor the infusion drip rate, buzzers and light-emitting...
Proceedings Article

3D Model of Pavement Distress Based on Road Gradient Using Unmanned Aerial Vehicle

Yackob Astor, Retno Utami, Sarah Nabilah Winata, F A Rahman, F A Gustaman, M R Firdaus
The implementation of UAVs in Indonesia on road infrastructure projects still widely used at the planning stage of new road routes and the supervision stage to determine the progress of the work. Meanwhile, at the post-work monitoring stage, the UAV is only used to identify and inventory the pavement...
Proceedings Article

Application of Sustainable Architecture Principles to Urban Green Open Spaces (Case: The Teras Cikapundung, Bandung, West Java)

June Ekawati, Tasya Sabila Ardiyanti
The development of urban green open spaces within the framework of environmentally friendly sustainable architecture is one of the human efforts to create a better life without hindering opportunities for future generations. The Cikapundung Terrace is one of the urban green open spaces occupying the...
Proceedings Article

Seakeeping and Motion Sickness Incidence (MSI) Evaluation of a Catamaran Tour Boat on the Papuma–Nusa Barong Route in Jember, Indonesia

Pratama Yuli Arianto, Ahmat Rifki, Wazirotus Sakinah, Skriptyan Noor Hidayatullah Syuhri
The increasing demand for marine ecotourism along Java’s southern coast necessitates vessel designs that prioritize passenger comfort and safety under moderate to high wave conditions. This study evaluates the motion response and comfort performance of a 17 m catamaran using a simulation-based approach....
Proceedings Article

Rule Based Classifier for the Detection of Autism in Children

Kusumalatha Karre, Y. Ramadevi
Autism is a developmental disorder that hinders the life of an autistic child with poor communication and a lack of social skills to carry out their day-to-day work. Detecting autism is very important at an early stage to help the child overcome their learning disabilities. Generally, Autism is diagnosed...
Proceedings Article

Experimental Study and Finite Element Analysis of Composite Constrained Concrete With Steel Tube and Prestressed Steel Hoop

Depeng Wang, Yikang Li, Dan Zhang, Yafei Zhang
To study the axial compression performance of composite constrained concrete columns with steel tube and prestressed steel hoops, seven groups (three specimens each group) were subjected to axial compression tests of constrained concrete columns. The axial compression mechanism of steel tube and prestressed...
Proceedings Article

A Review and Bibliometric Analysis on Essential Oil Nanoencapsulation

Wahyudi Budi Sediawan, Indah Hartati, Hary Sulistyo, Muhammad Mufti Azis
The potential applications of essential oils are limited by their natures as they are oxidized easily by light, heat, and other environmental factors. Essential oil impediments and their short shelf life promote the development and application of essential oil nanoencapsulation. Nanoencapsulation techniques...
Proceedings Article

Dynamic Modeling Method on Space Robot Dexterous Hand Based on Finite Element Theory

Bohan Lv, Shan Liu, Jinshu Gu, Guangshang Zeng
Robot is a complex system consisting of multiple joints and connecting rods with complex coupling relationship between multiple inputs and multiple outputs, making it very difficult to establish the dynamic model of the robot. In order to realize the real-time control of the robot and improve the control...
Proceedings Article

Maintenance Design and Computer Simulation of A Certain Type of Gear Wheel Reducer

Shuhai Wang, Fenghe Tao, Guibo Yu, Xujun Su, Xia Tao, Zhanjie Yuan
The gear wheel reducer of self-propelled weapons is the final reduction gear drive in the drive system. Under the same ratio of transmission, using reduction gear can reduce the load of transmission, drive shaft, main reducer, differential mechanism and half shaft, the size becomes smaller and the drive...
Proceedings Article

Effect of High Pressure Torsion on corrosion behavior of High Entropy Alloy in alkaline solution

Zhiwei Song, Yonghao Zhao, Guanzhong Wu, Xuzhou Gao
The high pressure torsion (HPT) process was used to process the FeNiCoMoV high-entropy alloy. The open-circuit potential test, the potentiostatic polarization curve test and the electrochemical impedance spectroscopy were used to study the effect of corrosion behavior of FeNiCoMoV High Entropy Alloy...
Proceedings Article

Analysis and implementation of image fusion technology based on simulation software

Hua Chen, Yan Cai
Affected by the environment and equipment, it is not possible to use the camera or sensor to complete the expression of environmental information, if multiple images are used, a large amount of image information will be generated, which is not conducive to data processing, and image fusion technology...
Proceedings Article

Analysis on the Curative Effect Observation of Endometrial Polyps’ Resection under the Hysteroscopy

Xingyun Sun, Yunxia Xue
Abstract. Objective: To observe and analyze the curative effect of endometrial polyps’ resection under the hysteroscopy. Methods: From March in 2012 to May in 2014, we select 64 examples of the intrauterine membrane polyp patients in our hospital, and who are randomly divided into two groups, 32 patients...
Proceedings Article

Wide-Area Current Differential Protection Based on DSP

Lan Yang, Can Bao, Jinbo Lan, Jianfei Yang, Huaren Wu
The paper introduces the development status of wide-area protection (WAP) and the wide- area current differential protection (WACDP) algorithm. Digital signal processor (DSP) TMS320F28335 is used as the controller, the system model is built with MATLAB/Simulink, combined with semi physical simulation...
Proceedings Article

Entire Function Sharing a Small Function with Its Derivatives

HuiLiang Zhang, ZongSheng Gao, YueYang Zhang
In this paper, we mainly apply the Wiman-Valiron theory to prove a theorem on growth of a linear differential equation. From this we obtain a uniqueness theorem concerning that a non-constant entire function and its derivative sharing a small entire function.
Proceedings Article

Online Course with Use of Free Online Learning Materials

Rudolf Burgi
learning material; free internet resource; class overview; class introduction; decision making; online learning; online course; UMUC
Proceedings Article

Examination of Industrial Design of Product Based on Combination of Interaction Analysis and TRIZ Tool -Take Example of Rescue Engineering Machinery

Jianjun Liu
The environment after disasters is abominable and complicated. By increasing the wide adaptability of rescue machine to make it operate more quickly and flexibly and increase the efficiency of rescue operation. Based on investigating and analysis of the features of specific environment and functions...
Proceedings Article

A Method For Identifying Abnormal Operation State Of Variable Pitch System Of Wind Turbine

Jinpeng Yang, Jianming Wang, Wanye Yao
From the analysis and arragment of historical data of wind turbine pitch motor temperature wind speed and other related parameters of hebei chigu wind farm in 2015 ,the paper obtains historical data using 10 minutes as acquisition unit under various operating conditions of wind turbine pitch system from...
Proceedings Article

An optimal Approach on Sensor Placement for Structural Vibration Survey

Chunhui Yuan, Weicai Peng, Junjie Zhang
Vibration test on hull structures with large size needs numerous amounts of sensors, which means too much work. However, notable error would come from reducing the number of sensors. An approach is proposed to reconstruct the complete structural vibration, which chooses the locations and the number of...
Proceedings Article

A Two-stage Coordinated Strategy for Integrated Exploration of Multi-robot Systems

Xue-Feng DAI, Lai-Hao JIANG
To improve performance for integrated exploration algorithms of multi-robot systems, a two-stage coordinated strategy is proposed in this paper. In the first stage, all robots explore unknown environments by a kind of forth and back trajectories which are shaped by social entropy and a voting mechanism....
Proceedings Article

Registration of acoustic emission in composite material by fiber-optic sensors based on adaptive interferometer

O.V. Bashkov, V.I. Zaikov, H. Khon, A.A. Bryansky, I.O. Bashkov, R.V. Romashko
Paper presents the results of studying the features of recording acoustic emission waves recorded by fiber-optic sensors. Fiber-optic sensors are used as an elastic medium that receives acoustic emission waves. For this purpose, the optical fibers are embedded in the polymer composite material during...
Proceedings Article

Study on Load Distribution of Temperature and Humidity Independent Control Air-Conditioning System

Qin Ouyang, Min Ouyang, Liping Xiang
Two kinds of typical temperature and humidity independent control air-conditioning system are introduced in the paper, and load distribution method is determined utilizing enthalpy-humidity chart thus laying a basis of energy saving analysis for THIC system.
Proceedings Article

Comparison of Displacement Ventilation, Mixing Ventilation and Underfloor Air Distribution System

Shouhong Ren, Shuo Tian, Xiangyi Meng
At present, the scientific community attaches importance to the problem of indoor air quality and building energy conservation seriously, the people’s requirement of indoor living environment is also improving constantly, improving the problem of air conditioning energy consumption of building energy...
Proceedings Article

Study on the Energy Storage Device in PV Generation System

Jingguo Rong, Yuan Tian
In recent years, the photovoltaic generation has become an important form of distributed generation. PV is greatly influenced by outside conditions such as light and temperature, and causes the stronger intermittent and randomness of the power output. As a result, storage devices are needed to improve...
Proceedings Article

Experimental Study of the Flexural Behavior of Concrete Beams with Recycled Brick Aggregate

Yuanbing Cheng, Guang-Hua Qiao
Two specimen of concrete beam with recycled brick aggregate and a common reinforced concrete beam as contrast specimen were designed. The beams were simply supported, the width and height of the rectangle section of the beams was 150mm and 300mm, the span were 3m, reinforcement and loading method were...
Proceedings Article

An Host Anomaly Detection Algorithm Based on Bayesian Tree

Yaning Zheng, Wujun Yao
The naive Bayes algorithm in intrusion detection have the problem of high internal dependence and the data "broken" in decision tree, in order to solve the problem, this paper combines the advantages of section in decision tree and multi-evidence fusion in naive Bayes, uses the Windows Native APIs related...
Proceedings Article

Large Signal Stabilization Method of Constant Power Loads

X.B. Liu, S.H. Ma
The electrical motor drives and power electronic converters of More Electric Vehicles usually behave as constant power loads (CPLs), and cause negative impedance instability. This paper introduced R parallel damping filters to stabilize the CPLs systems, and derived large signal stability criteria depending...
Proceedings Article

Electric power steering system for agricultural truck matching design

Z.G. Chen, W. Zhang, Q. Zhang, T.M. Zhou
This thesis aimed at the characteristics and the structural of a type of truck. It confirmed that its chosen power-assisted form of electric power steering system is Column EPS——that is C-EPS. On the platform of a sort of car we combined with the technical requirements of a certain model car steering...
Proceedings Article

An Efficient Separation of Pyrroloquinoline Quinone Using Chemical Complexation Extraction

XuePeng Yang, Panpan Li, Fangfang Wang, Jianbin Ye, Ke Ma, Duobin Mao
Pyrroloquinoline quinone (PQQ), an important natural product, is biosynthesized by Gluconobacter oxydans. In order to prepare the product in large scale, a rapid and selective chemical complexation extraction (CCE) is proposed to separate and purify PQQ from fermentation broth. In this work, the effect...
Proceedings Article

Multiagent Resource Dispatching in a Heterogeneous Cloud Environment

I.A. Kalyaev, A.I. Kalyaev, I.S. Korovin
The cloud computing paradigm has appeared: large-scale distributed calculations based on a pool of abstract, virtualized, dynamically redistributable computational resources, granted to external users via Internet on their demands. A cloud computing environments (CCE) get wider application for solution...
Proceedings Article

UAV intelligent system for patrol missions

Pengfei Han, Hongwei Zhao, Changzheng Chen
In response to the current UAVs need to man-control, poor life, signal transmission distance limitations can not be caused by the application of the UAV for patrolling, this article for the patrol UAV in the life, route planning, communication proposed a certain program, so that UAVs have more powerful...
Proceedings Article

An improved fuzzy entropy of Vague Sets considering hesitancy degree

Weibing Feng, Hairong Wang
The construction of fuzzy entropy is one of the research focuses in the field of vague sets. The existing fuzzy entropy formulae have three deficiencies: Firstly, as the increase of hesitancy degree, the change of entropy value is unstable; secondly, when the value of fuzzy entropy is 1, the change of...
Proceedings Article

IoT-based detection and support technology of surrounding rock in high-stress region

Luo Sun
In order to obtain the stability and stress data of the surrounding rock mass in the deep region of the mine, a reasonable support scheme and support parameters are adopted to reduce the degree of roadway deformation and damage in the deep region and reduce the cost of roadway maintenance. There are...
Proceedings Article

Determinant Variables behind Motorcyclist Daily Favored Speed

Don Cost, Siti Malkhamah, Latif Suparma
Unbalanced in mobility and safety is a latent issue because although speeding has been associated with fatal crash but excessive speed without having been punished still occurs. This study focuses on how to bridge it by identifying the reason, triggering variables and explanatory variables of speeding...
Proceedings Article

The Impacts of Illegal Gold Mining Toward The Implementation of Farming Rice Based on The Ecological Dimension in Merangin Regency Jambi Province

Erwan Wahyudi, Firdaus Firdaus
Merangin regency has become one of main areas in Jambi province with rampant illegal gold mining in the Rice Production areas for the last three years, giving a negative impact on the rice farming existing around the mine area. This research study aimed to identify the sustainability of farming rice...
Proceedings Article

Research on Global Energy Optimization Allocation Mechanism in the Background of Global Energy Internet

Ming Zeng, Tong Yan, Zhuhan Long, Liying Wang, Chenjun Sun
The Global Energy Internet aims to build a new global energy optimal configuration that focuses on clean energy and electricity. This paper studies the global energy configuration mechanism in the context of the Global Energy Internet. First, qualitatively analyze the Global Energy Internet's contribution...
Proceedings Article

Phytochemical Properties of Skin Care Cream Containing Essential Oil of Galangal

I Gusti Made Sanjaya, Ismono Ismono, Titik Taufikurohmah, Andika Pramudya Wardana
A research has been conducted on development and physicochemical characterization of skin care cream containing essential oils of galangal. The skin care cream containing essential oils of galangal developed consists of a red galangal cream that utilizes the essential oil ingredients extracted from red...
Proceedings Article

Research on Renewable Energy in Shandong Province

Hongtao Liu, Yingwei Chi, Li Xue, Dengfeng Xu, Jinxiao Li
Shandong is a major province located in eastern China, which has large population, prosperous economy and great energy consumption. For better development, more information should be gathered for politic making or energy planning. In this paper, a large amount of information was searched on bibliographic...
Proceedings Article

Determination of potassium content in potassium nitrate used for fireworks and firecrackers based on Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF

Jun-yi Wu
Methods used for the determination of potassium content in potassium nitrate are mostly based on traditional chemical method, which is lengthy and cumbersome. If inductively coupled plasma emission spectrometry or atomic absorption spectrometry are used to determine the potassium with high content, the...
Proceedings Article

Experimental study on optimization of water reducer in pumping concrete

Qiansheng Yuan
The different water reducers have different suitability and different influence of performance with concrete mixture. Combined with the engineering practice, 3 kinds of naphthalene-based water reducer (NSR) and 4 kinds of polycarboxylate-based water reducer (PC) were selected as the objects. The saturation...
Proceedings Article

Improvement Research on Electric Resistance Welding (ERW) Can-Hammering Mechanism Control of Three-Piece Can

Zongtan Zhou, Xu Zhou
Three-piece can is also known as SPTE three-piece can. Due to the whole can being composed of can body, bottom and cap, it is called three-piece can. It is the common metal container used in food, beverage and other industries. Three-piece can making technology has been applied and developed for almost...
Proceedings Article

Facile One-Pot Ultrasound-Assisted Reduction Synthesis of Pd/C Nanocatalyst for Green Suzuki-Miyaura Coupling

Jiazhe Li, Xuefeng Bai
Palladium nanoparticles (Pd NPs) supported on active carbon was prepared via ultrasonically treating Pd precursors in ethylene glycol without any protective agents. The Pd/C nanocatalysts were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy...
Proceedings Article

Brief Discussion on Selection of Flocculant in Sewage Treatment

Feng-li Zhou, Bo Zhang
The sewage treatment system adopts polymerize aluminum chloride (PAC for short) as a flocculant. In the process of selecting flocculant, various factors such as cost, operation, influent water quality, equipment and so on are comprehensively taken into account. A certain sewage treatment work has selected...
Proceedings Article

Modelling and Control of DC Motor Speed and Position for Wheel Mobile Robot Application

B. Supriyo, A. Suharjono, K. W. Atmaja
This paper presents the simulation works of PID based speed and position controllers for the DC motor used in mobile robot applications. The mathematical model of the DC motor modelling is developed using Matlab System Identification Toolbox based on its input and output signals obtained during open...
Proceedings Article

Improving Self-regulated Learning for Student’s Achievement During the COVID-19 Pandemic

Tri Wrahatnolo, Bambang Suprianto, I. G. P. Asto Buditjahjanto, Yulia Fransisca
Since the Covid-19 pandemic in early 2020, learning at several universities has taken place online. The purpose of this study was to determine the effect of Self-Regulating Learning (SRL) on Student’s Learning Achievement (SLA). This research is an explanatory type with a survey research method. The...
Proceedings Article

Research on Intelligent Control Technology for Surrounding Rock Disturbance in Hydraulic Shield Tunneling

Hailong Li, Qinghua Xiao, Xiaofeng Xu
With the widespread application of shield tunneling in large-scale hydropower projects, controlling surrounding rock disturbance has become a critical challenge. This study focuses on the development of an intelligent control framework that integrates multi-source sensing, real-time monitoring, machine...
Proceedings Article

Gradation Design and Optimization of Mineral Aggregates for a Highway Project in Central America

Canhui Xiao, Jianbao Fu, Yucheng Ding, Huaijin Xu
In response to the environmental characteristics of the tropical rainforest climate in Central America, where the annual rainfall reaches 4,000 mm, this study systematically establishes control points and restricted zones for mineral aggregate gradation in strict accordance with Superpave specifications...
Proceedings Article

Investigation of the Factors Influencing the Rehabilitation of Underground Pipes in Old Neighborhoods Using DEMATEL-ISM

Yingbo Ji, Xinyi He, Yuan Qi
Renovating underground pipelines in old residential areas can better meet the living needs of residents and improve the quality of urban development. To ensure the smooth implementation of the underground pipe rehabilitation project in old districts, This paper presents a model of the factors influencing...
Proceedings Article

Sentiment Analysis of Public Perception Regarding the Merdeka Belajar Kampus Merdeka (MBKM) Policy on Twitter Using the K-Nearest Neighbor (K-NN) Method

I Gusti Ngurah Bagus Catur Bawa, Ida Bagus Putra Manuaba, Made Pradnyana Ambara, I Wayan Suasnawa, I Putu Bagus Arya Pradnyana, I Nyoman Eddy Indrayana
This research aims to analyze public sentiment and perceptions of the Merdeka Belajar Kampus Merdeka (MBKM) policy through data obtained from social media Twitter. MBKM is a higher education policy in Indonesia that aims to provide tolerance and independence for students in choosing courses and accessing...
Proceedings Article

De Novo Transcriptome Sequencing and Identification of Detoxification Enzyme Gene in Mulberry Pyralid (Glyphodes pyloalis) in Response to Nitenpyram Stress

Yang Zhou, Wanglong Miao, Yiren Wang, Fuan Wu
The mulberry pyralid (Glyphodes pyloalis) is a major pest in mulberry fields, and its control has been a long-standing challenge. Investigating the toxic effects of nitenpyram on the mulberry pyralid and its detoxification mechanisms under nitenpyram stress is of great significance for pest management....
Proceedings Article

Enhancing Material Selection Efficiency: A Multi-Criteria Decision-Making Approach

Aryo De Wibowo Muhammad Sidik, Ilyas Aminuddin, Cahya Laxa Eka Putra, Edwinanto Edwinanto, Apriditia Karisma, Yufriana Imamulhak
The selection of materials plays a pivotal role in product design and development. With a plethora of materials available, making the right choice is crucial for a company’s reputation and profitability. This research aims to establish an efficient and systematic platform for optimal material selection...
Proceedings Article

CPT-Based Assessment of Wave Induced Non-uniformity Liquefaction in Yellow River Delta

Kexian Li, Zhongnian Yang, Dayong Zhou
Liquefaction has caused significant failures and represents a significant problem for the community and geotechnical engineering designers. The survey in the Chengdao sea of Yellow River Delta showed the presence of a large number of pits, geological disasters gullies, landslides, residual body and buried...
Proceedings Article

Study on the Design of Greenhouse Monitoring System based on Zigbee Wireless Communication Technology

Jie Huang
With intelligent greenhouse computer, network, electronic, automatic control, and other high-tech means to achieve automatic detection and control of plant growth small environment temperature, humidity, light, soil moisture, ventilation and other environmental parameters, breaking the traditional agricultural...
Proceedings Article

Dynamic models of deformation of crustal blocks in the area of development of coal deposits - the basis of the information security of their development

Aleksandr Solovitskiy
It is found that transition to new, safe and environmentally harmless technologies of the development of coal deposits in Kuzbass is not possible without the development of new models of dynamic deformation of crustal blocks. For their implementation the registration kinematics theory of crustal blocks...
Proceedings Article

A Method in Smoothing Fluctuation of Wind Power with Wavelet Threshold Filtering and Mean-value Intervals by HESS

Bingying Sun, Zongqi Liu, Shuili Yang, Boyue Zhang
Due to the inherent fluctuation nature of wind power, voltage control and frequency regulation in China's power grid become more intricate as the wind power penetration level increasing. Provided with traits of comprehensive response and bidirectional output, wide concern has been arisen by the hybrid...
Proceedings Article

Test Study on Behavior of RC Beam to Concrete Filled Steel Tubular Column Joints

Qin Chen, Lijun Liang
Two new type of RC beam to concrete filled steel tubular column joints are proposed here. Test study on 22 joint specimens under vertical load is introduced here, which includes RC beam to concrete filled steel tubular column joints with four types of connections and RC beam to circular column joints....
Proceedings Article

Analysis of the Current State of the Processes of Hybrid Laser-Plasma Welding

Volodymyr Korzhyk, Oleksandr Bushma, Vladyslav Khaskin, Chunli Dong, Volodymyr Sydorets
The paper presents brief retrospective of progress and state-of-the-art of hybrid laser-plasma welding (HLPW). It is shown that the main objectives of HLPW include not only plasma-arc heating of item metal to increase its absorptivity, but also modification of welding thermal cycle to lower the rate...
Proceedings Article

Life Cycle Assessment of Anaerobic Digestion of Municipal Waste for Vehicle Biogas Production

Wei Huang, Xin Zhang
Using ISO life cycle analysis and assessment methods, life cycle assessment (LCA) of anaerobic digestion of municipal waste for vehicle biogas production in Anyang was studied. Through the confirmation of the goal and scope, the inventory analysis and environment impact potential calculation were made...
Proceedings Article

Study on Training of Computer Science and Technology of College Students

Zhiqiang Zhao, Yan Gao, Shengxiao Li
Now days, Computer science and technology program is not only one of the required programs in the modern colleges and universities, but also necessary knowledge and skill that are required by the information age on talented personnel to possess. At present, seen from the teaching activities and training...
Proceedings Article

Design and Implementation the Monitoring System of Fowlery Temperature and Humidity Environment Base on ZigBee

Zhanwu Peng, Xue Wang
A ZigBee wireless sensor network was designed and implemented, to monitor the temperature and humidity changes of the fowlery. Breaking the various malpractices of the traditional arrangement of wire monitoring points. After the actual test, results showed that using the ZigBee wireless sensor network...
Proceedings Article

Performance analysis of DC-DC boost converters based on PV system

Peng Wang, Yan Cui, Danlei Yang
This paper presents the simulation of PV system using Multisim and compare the simulation results with the parameters of the actual solar cell, to analyze the errors. For further study, we prove that a DC-DC boost converter can achieve balance and we can figure out the upper and lower limit value of...
Proceedings Article

Improving the Quantum Efficiency of Photocathode CsI

Xuanni Zhang, Fan Lu
CsI is a great photoelectric emission material in the field of photon imaging detectors owing to its high quantum efficiency in the ultraviolet range. But quantum efficiency depends on the electron emission mode deeply. With specific structure of photocathode, the photoelectron can operate in both semitransparent...
Proceedings Article

The Finite Element Analysis of the Stress Field in the Core of Continuous Casting Slab

Qiang Yin, Gongfa Li
The continuous caseter was widely used of in steelmaking enterprises, with the improvement of product quality, the optimization of the cost control and the improvement of production efficiency, the process requirements in production the was continuously improved and updated. The velocity of cooling water...
Proceedings Article

Prediction of Explosion Heat of Aluminized Explosive Based on Artificial Neural Network

Xin Tian, Yonggang Liu, Yueqiang Jiang
In this study, a three-layer artificial neural network(ANN) model was constructed to predict the explosion heat (Q) of aluminized explosive. Elemental composition was employed as input descriptors and explosion heat was used as output. The dataset of 24 aluminized explosives was randomly divided into...
Proceedings Article

Forecast on Short-Term Wind Speed and Wind Farm Power Generation

Yiping Cheng
Winds forecast is of great significance for operating a wind farm and power systems. The accurately predict wind speed can effectively reduce the adverse impact of wind farms on the power system, while increase the wind farm in the electricity market competitiveness. This paper studied time series and...
Proceedings Article

Research of the Design of Hybrid Power Compensation Controller Based on Neural Networks

Jian-wei Zhao
The problem of harmonics compensation in power system was concerned in this paper. The method based on artificial neural network (ANN) about how to design the hybrid power compensation (HPC) controller was proposed. The HPC controller can automatically measure the harmonic currents and automatically...
Proceedings Article

Influence of Segregation on Pavement Performance of Asphalt Mixture

Zhi-quan Wei, Qi-fa Lu, Jun Yu
In order to solve the research deficiencies of influence of segregation on the performance of asphalt pavement, the segregation simulation and performance test were conducted. In terms of different grading deviation, the classification standard of segregation was divided into four levels. Subsequently,...
Proceedings Article

Innovative Design of Belt Conveyor Support Roller Based on TRIZ

Qi-li WANG, Yan LI
For now the belt conveyor roller has short service life, high rolling resistance, heavy weight, large noise problems, leading to the roller work effect is not ideal. This paper uses the TRIZ theory for innovative design of belt conveyor roller to simplify the inner structure of the roller, and reduce...
Proceedings Article

Nonstandardization Based on Standardization

Gang MENG
Standardization has benefited the modern architecture as one part of industrialization technology. In the meantime it implies a restriction on individuality what is often highly praised by architects. We should look for a compromise between standardization and nonstandardization in architecture. This...
Proceedings Article

Design of high-accuracy decimal frequency divider with Verilog-HDL

Shaowei Ma, Baolu Guan, Ligang Hou
This paper presents a more complex algorithm with Verilog-HDL, which based on the dual-modulus preseted decimal frequency divider. This algorithm can not only increase the accuracy of decimal frequency divider. , but also can be used to divide a clock. Simulations are conducted to analyze the characteristics...
Proceedings Article

Design of Electromechanical Temperature early warning system based on BP neural network

Sheng Jun
For the current situation that the coal mine accidents occurred frequently, especially the fact that most major accidents ware caused by electromechanical fires, this paper analyses the cause of the accident caused by electromechanical, proposes the temperature monitoring and early warning management...