Atlantis Highlights in Engineering

The article deals with the evaluation of tribological properties of thin coatings formed by solid lubricants. The aim is to obtain and compare data obtained in experiment. The monitored parameter is the coefficient of friction, which is evaluated on three types of samples. The samples are made of bearing...

Augmented reality(AR) has the unique quality of providing a direct link between the physical reality and virtual information about that reality. In the application of a visitor visiting the campus with a smartphone, the location and pose information of the phone are acquired and calculated in real time....

This paper proposes a refined framework of affect/Kansei-based applied to product/service experience considering design thinking and sustainability approaches. Design thinking facilitates more comprehensive step-by-step methodology starting with more human basic needs, followed by the global issues which...

Climate change has altered the precipitation patterns of temperate grasslands. However, our understanding of the ecological effects of non-growing season precipitation changes remains limited. To explore the impact of non-growing season precipitation on the photosynthesis of typical desert grassland...

This study investigates the emission characteristics of B24 low-sulfur biofuel (24% FAME + 76% LSFO) compared to marine low-sulfur fuel oil in low-speed marine diesel engines. Emissions of carbon dioxide (CO₂), nitrogen oxides (NOₓ), carbon monoxide (CO), total hydrocarbons (HC), and black carbon (BC)...

In recent years, rapid urbanization has led to frequent occurrences of extreme weather conditions. As a vital component of urban transportation networks, subway lines often face flooding disasters. Due to the unique spatial characteristics of subway facilities, flooding incidents can easily lead to inefficient...

Nowadays, construction site engineering safety accidents occur frequently, and there are problems such as unsafe equipment and equipment, management defects, and improper operation of personnel. On the construction site, workers wear safety helmets as required, but fall accidents still occur due to problems...

Regional coordinated development is an important goal of current economic development. Based on the spatial econometric model, this paper analyzes the convergence and variation characteristics of regional innovation, and studies the influence of spatial related factors on the convergence of regional...

Hydrological factor causes flood. Thus, it needs to be examined through rain frequency analysis by using continuous chance distribution. The location of this research is at the downstream sub-watershed of Bengawan Solo River. Average rainfall inflow area is calculated by Polygon Thiessen method with...

The durability of cement mortar in structural engineering is very important to the structural safety and stability, especially under the action of sulfate erosion, and the deterioration speed is faster and more serious. However, the fracture performance of mortar is not clear, so this paper studies the...

The city of Palembang has cases of infectious diseases that continue to increase due to worsening environmental conditions, while the use of maps by agencies in the analysis of the health sector is still limited to maps that do not meet cartographic rules. The aim of this study is to offer information...

In order to reasonably evaluate the reliability system engineering capability of equipment contractor, a reliability system engineering capability evaluation method based on combination weighting cloud model is proposed. Firstly, a set of scientific evaluation system of reliability system engineering...

The electric vehicles (EVs) become very popular this day as an effect of the demand in order to reduce automobile emissions. The utilization of energy efficiency to preserve the global environment has been one of public concern. One of current interest is to provide the equipment related to efficient...

The structure of biomass direct fired boiler differs greatly from that of common fuel powder boiler, so the difference of operation process is great, which will inevitably lead to the difference of operation regulation law. Therefore, it is very important to analyze its technological process and combustion...

Health is a good condition of body, soul, and society for someone who lives healthy. The examination of vital signs on the patient’s body is to determine a person’s health. Temperature is a biological parameter and a major factor in vital signs that must be checked. Taking the patient’s temperature poses...

The silt dredging project can effectively control the adverse effects of sediment accumulation at the bottom of the lake channel on the navigation channel, ensuring the full play of navigation benefits. The dehydration treatment of silt is a crucial part of the dredging project. Based on the channel...

It is a challenging project to address the aftermath of the grassfires in the Rhigos Mountain. Grassfires in the summer of 2022 damaged a significant area of the mountainside and are a recurrent issue. In June 2023, the affected area was equivalent to 300 football pitches, causing significant damage...

Energy consumption acts as a catalyst for economic growth, as it provides the necessary power for industrial production, transportation, heating, and cooling. A reliable and affordable energy supply is essential for businesses to function efficiently and effectively. In this context, a steady and sufficient...

In order to explore the vibration performance of the wooden floor cover, the basic modal parameters of the structure are obtained on the basis of the on-site dynamic test, and the modal analysis of the wooden floor cover is carried out by finite element software to obtain the self-oscillating frequency,...

The aim of this study is to design and shape optimization of flywheel rotor with different combinations of diameter and height with constant rotational speed, energy storage capacity and material properties. Shape optimization was performed for three different shapes to find the most suitable shape for...

Experiments were made for the internal turning of Teflon at high feeds, collecting the resulting chips. There were studied the chips and the machined surfaces using a magnifying glass and a microscope. The shapes and dimensions of these chips were analyzed, explaining their correlation with the feed...

The early diagnosis and healthcare monitoring, is one of the major health concerns in worldwide. In order to develop precise model that classify the diabetes machine learning offers numerous algorithms. The machine learning techniques promised for detection of diabetes as fast as and also its cost effective...

In recent years, the online car-hailing industry has shown a rapid development trend, and the demand for online car-hailing and the number of floating populations will continue to grow. In this context, strengthening the nationwide supervision of online car-hailing epidemic prevention and control can...

The public logistics information system for SMEs is developed by the use of advanced technology, which is based on the idea of building blocks. The whole system is divided into three subsystems, and each with its own direction. A layered architecture is used for the core services subsystem. Using the...

Kancingan house is a house made of wood materials as its main structure but the walls are still made of bricks. The use of wood as the concrete-replacing materials is due to the relatively lower cost than the permanent structure made of concrete as the main structure since the concrete materials composed...

Prefabricated Vertical Drains (PVDs) are geosynthetic drains that are used to shorten the horizontal drainage path and allow water to flow laterally to the nearest drain. Because of remolding during installation, a zone of smear around the drain is formed, reducing the coefficient of horizontal permeability,...

The TBRB 01 (Testing Bench for Railway Bearings) is designed for testing axleboxes in accordance with EN 12082:2017+A1:2021 Railway applications- Axleboxes- Performance Testing. The subject of the test is a structural group consisting of a housing body, rolling bearings, in this case, cylindrical roller...

Organic fertilizer are fertilizer that work in increasing the biological, chemical and physical activities of the soil so that the soil becomes fertile and good for plant growth. Kersen leaves and eggshells are materials that can be used as liquid organic fertilizer because they contain various types...

The expansion of Metro Line 2 with the addition of Zhongshan Road Station in Hohhot presents a paradigm of urban engineering that merges infrastructure growth with the conservation of extant utility systems. This study examines the station’s construction, located at a critical junction, which includes...

The biosensor in this study used a butterfly pea flower. Butterfly pea flowers require a classification system because the colors produced in detecting pH are similar. The method used in this research is using image processing to get the RGB value to be analyzed using the Raspberry Pi 4. The operation...

This paper discusses the applications of roof tiles type of PV modules. Published researches on this topic were reviewed. In addition, performance evaluation of a roof tile type of PV modules was conducted under the tropical climate of Surabaya, Indonesia. The objectives of present study are to review...

Industry-University-Research (IUR) collaboration network is an important driving force for digital transformation. At the same time, under the background of manufacturing service transformation, policy support and consumer demand are crucial to the digital transformation of vehicle enterprises. Therefore,...

This article focuses on Nearly Zero Energy Consumption Residential Building, Using software such as Green Building SWIER, a model was established, and the simulation results under different operating conditions were compared and analyzed. The results show that when Increasing the thickness of the insulation...

As a place emphasizing the behavioral experience and inner feelings of shoppers, the overall comprehensive quality of the block environment affects the comfort level of its users. In the process of urban development, how to excavate the inherent environmental characteristics of traditional commercial...

The fragmentation of blocks upon impact during rockfall is a complex and significant phenomenon that remains poorly understood and inadequately modelled. The authors have conducted extensive experimental campaigns on artificial spherical rock-like specimens. The findings led to the first stochastic fragmentation...

One of the most widely used software development methods is the Rational Unified Process (RUP) method. The reason for using this method is because this method uses an object-oriented paradigm that more closely models the actual state of the system, is iterative and focuses on the needs of the user. Usually...

The installed capacity of pumped storage power stations in China is in the world’s leading position. Due to the special geographical and geological conditions and specific use scenarios, the building characteristics of pumped storage power stations in China can bring some references to the world. Based...

The improvement in communication technology incorporates sophisticated electronic gadgets that rely on wireless technique to support the signal transmission from the emitter to the receiver points. The cloudlet scheduling method relies on the environment and task type to accomplish the scheduling process...

Land is the place where a structure or construction is established, both construction of buildings and roads. What often causes problems is if the soil has bad properties such as high plasticity and a large potential for shrinkage. One way to improve the shrinkage properties is to stabilize the soil...

The pandemic caused by COVID-19 virus is a big thing faced by people all over the world, including Indonesia. Washing hands with soap and water is one way to prevent the spread of COVID-19 virus. Soap formation is the saponification process which is the reaction between triglycerides and alkali that...

Elevated temperatures significantly contribute to the deterioration of electrical performance in polymeric insulation under HVDC conditions. To enhance the power transmission capacity, it’s crucial for new cable designs to incorporate insulation materials with superior high-temperature resistance, involving...

Rivers ships are complex welded structures, built of specific volume sections. Each volume section contains tens or hundreds of nodes, characterized by high restraint conditions. Due to the welding process, each node experiences local concentration of stresses. The paper aims to present a double, analytical...

Technological advances have had an impact on all aspects of human life, one of which is the business world as well as the internet. A website is a means of providing information, promotion and communication to customers. This research tries to analyze the service quality of the POLSRI Learning Management...

This paper presents the long-term settlement predictions of up to 3.5-m tall, 33-km long berms around the perimeter of five water regulation ponds at the perimeter of Lake Nabor Carrillo. Settlements due to the construction of the perimeter berms were performed using Settle3. Three-dimensional numerical...

Smart grid is a new power system based on information technology, which combines traditional power grid with communication, computing and other technologies. The rapid development of smart grid poses new challenges to the security and privacy protection of power grid. Access control is one of the key...

The impact of the greenhouse effect induced by CO2 has demonstrably influenced the trajectory and sustainability of human society. In the preceding decades, the atmospheric concentration of carbon dioxide has escalated from 277 PPM in the industrial era to 412.4 PPM in 2020. In 2020, China, ranking among...

Through the long-term and precise structural deformation monitoring of buildings to determine its health status is very important for their safe use and operation maintenance. At present, the traditional surveying measurement is mainly used to monitor the building deformation, which is not only labor-consuming...

Prosumer households with photovoltaic systems face the problem of occasionally generating electricity that cannot be used within the house but must be fed into the electricity grid. This is not desired since with changing policies in Germany, the feed-in tariff has been reduced considerably and the cost...

Several neural networks corresponding to feature space in the paper were formed by Boosting method variant and RBF neural network based on particle swarm optimization (PSO), and these neural networks were integrated, so that the classification information of CAD three dimensional (3D) models was given....

Despite being located on the border area, Merauke has a very important architectural historical heritage. However, if its current existence is not well-preserved, it will lead to extinction. In fact, the historic building provides an image or identity and increases the tourism value of a city. The Old...

Voltage fluctuations, sag, and swell caused by overload situations in transmission lines are significant obstacles impacting grid reliability, power quality, and equipment performance in modern power systems. This methodology seeks to solve these issues by integrating a Static Synchronous Series Compensator...

Food is the most important thing for people. As a necessity of human daily life, the stability of its supply chain and product quality and safety have always been the focus of the whole society. Establishing a tough agricultural supply chain that can resist all kinds of shocks will be the inevitable...

This review introduces the impact of tunnel construction on adjacent buildings and analyses the potential hazards to adjacent ancient buildings. List the commonly used non-destructive testing methods for deformation and damage in ancient buildings today, including infrared thermal imaging technology,...

This study examines the high-temperature behavior of ultra-high-performance concrete (UHPC) formulated with aluminate cement and various fiber and aggregate combinations. Key performance metrics, including compressive strength, mass loss, hydration characteristics, porosity, and micro-structural changes,...

A technical framework, including Microservice architecture, open-source databases GreenPlum and PostGIS, SuperMap iServer engine, and open-source WebGIS client OpenLayer, is proposed to meet business requirements for the “planning one map” system concerning comprehensive transport. This solution addresses...

The academic information system in higher education is a system that has an important role in higher education operations. Interoperability between academic information system is needed to bridge the exchange of data and information in heterogeneous environments, where systems are developed using different...

Reclamation of a large landbridge constructed from backfill material is required as part of the mine closure plan for an open pit mine in the Pilbara region of Western Australia. There is a risk that rock falls initiated during mining of the landbridge could affect an area located approximately 80-100...

The infrastructure development is not equal to the consciousness of keeping it. In many areas, the destruction occurs before the development has been finished. One of them can be seen in Sekanak River restoration. Some parts have been damaged although the development has still be in progress. Therefore,...

As an emerging information technology (IT) platform, Enterprise social media (ESM) such as DingTalk and WeChat experienced explosive growth during the outbreak of COVID-19. ESM is not only a communication channel but also a social platform for managing human resources, communication, learning, collaboration...

A flat tape composed of several hundreds of silica filaments was used as a carrier for the thermochromic dye bis (diethylammonium) tetrachloridocuprate (II) (DEA-CuCl4) and coated with a methyl silicate resin. The thermal transition of the created composite was around 42 ℃ and its surface color change...

The purpose of this study was to find the relationship between density D and safety factor SF of the embankment against landslides. If the relation between D and SF is known, then we could simplify the slope stability calculation. The safety factor against landslides could be determined by only entering...

The Pillared Interlayered Clays (PILCs) have attracted significant attention in recent years due to their versatile applications as adsorbents and catalysts in various environmental and industrial processes. This mini review presents a comprehensive overview of the recent researches conducted on PILCs...

Stone Columns were first introduced approximately 60 years ago as a technique for improving both cohesive soils and silty sands. Its construction involves the partial replacement of unsuitable soils with a pattern of compacted vertical columns of stone. In the settlement analysis software, Settle3, a...

For the past 25 years, China’s power system has maintained rapid growth and can face a huge transformation, and many of the advantages of the past have become resistance to the transformation from such a large-scale centralized, fossil-fuel-based power system to a zero-carbon power system. From a full...

CAD-based geometric design has been widely used in various industries in the society. With the continuous improvement of design complexity, higher requirements are placed on the model simulation design of high-precision and high-confidence. The paper analyzes the simulation process of 3D model and improves...

In this research, the features of the previous research information system isdeveloped. The development of the system is about how to design and implement an e-scheduling system, to deal with teaching schedule problems which include for example the proportional or fairness of teaching load, the suitability...

Microwave heating is a green technology that provides many advantages over conventional heating. In this paper, we analyse some composite ceramic materials, formed by barium carbonate and hematite powders. There were used three mixtures with micron, submicron and nanometric particles size. All the mixtures...

A formal education pathway should include a comprehensive assessment that oversees students’ competence not only in terms of cognitive aspect, but also the students’ psychomotor. Performance-based assessment was developed in this paper and aimed to improve student’s all-round performance in their studies...

Starting from the causes of concrete slump loss and the polymerization mechanism of different types of polycarboxylic acid water reducing agents, this paper introduces the effects of different gradient slump retaining polycarboxylic acid and water reducing polycarboxylic acid combinations in polycarboxylic...

In view of the particularity that the current analytical theory of box girder distortion is mainly limited to single-cell cross-sections and double-cell cross-sections without cantilever plates, this paper uses the plate element method to establish the distortion control differential equations of single-box...

Road subgrade earthwork engineering requires a large amount of high-quality filling materials. The extensive exploitation of natural resources causes environmental damage. Based on a highway construction project in the Gobi Desert, this study utilized aeolian sand as the filling material for road embankments....

This study aims to develop a business intelligence information system dashboard by integrating google charts into the system to present information in graphic as data visualization. The information presented can be in the form of graphs with percentage values, summary values, and other aggregation values...

The integrity of high temperature and high pressure (HTHP) gas well is one of the challenges to the safe and stable production of Tarim Oilfield. As a result, conducting test and evaluation on these wells are of great significance. In this paper, the state of the art of researches related to annular...

Currently, China’s urban development has entered an important period of urban stock renewal, and the adoption of Self-Update mode in old residential areas is conducive to making up for the deficiencies of government-led and market-led modes in the mismatch of public goods and transitional real estate....

Ecological and environmental informatization is not only an important component of national cyberculture and informatization construction, but also the core content and support guarantee of ecological and environmental protection work, which is related to the performance ability of ecological and environmental...

Automatic wheelchairs are crafted to greatly improve the quality of life for individuals with disabilities. These sophisticated devices utilize cutting-edge hand gesture control technology, enabling users to makeover the wheelchair using simple and natural movements. This hands-free system simplifies...

Celerated pace of market development in the natural gas industry, the country’s gradual liberalization of natural gas prices, and the gradual opening of the upstream market to the public, the changing external factors will undoubtedly pose a huge challenge to the survival of natural gas marketing companies....

The data exchange processing technology in the grid communication data technology system can be calculated for scenarios with real-time analysis requirements. It has the characteristics of real-time calculation, low latency and high scalability, and provides a new idea for solving the problem of exchange...

There were various alternative construction work methods that could be chosen as the most suitable in order to achieve the project’s final goal by using the resources efficiently with an optimum result (cost, quality, and time). The alternative work methods could be applied on various projects, such...

This research aims to build an information system for achieving students at Management Informatics Department State of Polytechnic Sriwijaya for display useful information. Information System on this research is used to design systems using PHP programming. The application used in this research is to...

A recent research defined the application of Reliability-Based Design (RBD) approach as an improvement compared to the Limit State Design (LSD) in the definition of actions and resistances for the design of hybrid barriers and attenuators. An extensive campaign of full-scale tests on these two types...

Pneumatic flexible elements are used in pneumatic shaft couplings. These flexible elements are connected in different ways, and they are pressurized with a certain pressure. The article examines temperature changes of two connected elastic elements. It also describes measuring devices, and it examines...

Based on the investigation data of loess seismic damage over the past few decades, this paper summarizes the main types and characteristics of damaged loess slopes and establishes an evaluation method for the damage levels of loess slopes. Broadly speaking, damaged loess slopes could be categorized into...

Since the introduction of the PPP model in China, the highway PPP project has been the focus of many people's attention. If the project with large investment scale, long construction cycle and long operation time wants to obtain win-win results, it must control and manage the risk in an all-round...

In the context of the digital age and innovation-driven strategies, the rapid development of the e-commerce economy has had a significant impact on regional enterprise innovation. This paper collects the panel data of 30 provinces (municipalities and autonomous regions) in the country from 2013 to 2020...

The Convolution Neural Network (CNN) architecture is well-suited to performing both detection and classification tasks on image data. The inclusion of layers in the CNN improves its performance whilst training. Adding a lot, on the other hand, will cause the architecture to lose or explode gradients...

In this paper finite element analysis is applied to evaluate the results regarding the stress and deformation during the turning process of the commercially pure titanium. The results are a very important task to appreciate the state of the piece, from point of view of stress and deformations, during...

A full scale, axial Pile Load Test (PLT) using an Osterberg Cell ® (O-Cell) assembly installed in a test shaft, and a lateral PLT using the same test shaft and a reaction shaft were carried out to inform caisson (drilled shaft) design for a project in Toronto near Lake Shore Blvd. Under supervision of...

Energy storage charging pile participating in the joint operation of power grid can not only reduce the cost of power grid expansion, but also obtain the benefit of participating in the auxiliary management service of power grid demand side response, so as to reduce operation cost. In this paper, energy...

This work outlines an approach to the optimal design optimization of a photovoltaic (PV) and battery storage system and its integration into the sector-integrated energy system of a logistics company’s facilities. Another major objective is the optimized integration of refrigerated trailers (reefers)...

Rockfall is a high-energy natural hazard that poses significant threats to inhabited areas and infrastructure in mountainous regions. Rockfall net fences are widely used passive structural systems designed to mitigate this hazard by intercepting and stopping falling rocks through energy dissipation....

This article aims to describe the importance of ergonomics implementation for the sustainability of groundwater conservation programs. Ergonomics concept has been applied in research on groundwater conservation in Denpasar City, Bali, Indonesia (2013-2018), started from problem identification, data collection...

Spiral chute is an efficient equipment for gravity separation. A numerical simulation model concerning sorting flow pattern and particle trajectory of the spiral chute was built using Computational Fluid Dynamics (CFD) technology to study the effect of the diameter and pitch to diameter. Trajectory of...

With the gradual advancement of the country's environmental protection policies, the air-supported membrane structure, characterized by its short construction period, cost-effectiveness, and high safety during construction, has been widely used in the full enclosure renovation of open-air coal yards...

This paper explores the application of ChatGPT and its core technology in the field of intelligent accounting based on the artificial intelligence product ChatGPT and its core technology model. In particular, it is applied in intelligent accounting, intelligent financial sharing, intelligent financial...

Spiral concentrator is a kind of fluid-film gravity concentrator, and the flow pattern of the slurry film in the spiral chute is closely related to the geometry of the spiral chute, especially the cross-sectional shape. In order to explore the influence of the cross-section shape of the spiral concentrator...

In order to explore the relationship between the maximum seismic bending moment at the bottom of a railway self-repositioning pier and its initial lifting moment, a finite element analysis model is established based on OpenSees platform on a 32m railway simple supported beam bridge as the engineering...

The research aims to find the authorized mechanic perception of the towing hook’s development to lay at the motorbike’s front section. A prototype invention of a motorbike towing hook was found in 2018. However, it has never been tested for function by an official motorbike dealer in Batam. The research...

Short-term precipitation forecasting is one of the key challenges in meteorological predictions and plays a critical role in real-time weather disaster response and mitigation. Weather conditions are primarily obtained through radar echo information, and short-term forecasts mainly rely on the prediction...

The main goal of this article is to describe a ski cableway gearbox condition assessment process. The cableway is a typical sample of a machine with carefully monitored technical condition for safe operation. The article describes all steps of the process including vibrodiagnostics and optical assessment...