Proceedings of the Rocscience International Conference 2025 (RIC 2025)

219 authors
Huang, Zhanyu
Rockfall Back Analysis of an Experimental Case History
Huarcaya, Alex
Validation of failure surfaces of a heap leach pad in the Peruvian Andes using LEM and SSR method
Hung, Zhanyu
Application of a New Stochastic Rockfall Fragmentation Approach For Lumped Mass Simulations
Ismail, Mohd Ashraf Mohamad
Multi-scale Characterization of Sandstone-Shale Interbedded Formations: Integrating Rock Material Properties for Stability Analysis
Javankhoshdel, Sina
Peer-Review Statements
Javankhoshdel, Sina
Slope Stability Analysis of an Open-Pit Mine Using 3D LEM and 3D FEM
Kalumba, D.
Feasibility of Reinforcing Tailings Storage Facilities Using Polyethylene Terephthalate Fibers
Kalumba, Denis
Slope Stability Analysis of a Surface Portal: A Case Study of a Platinum Mine
Kazimierczak, Mateusz
Rockfall Back Analysis of an Experimental Case History
Khunou, B.
Feasibility of Reinforcing Tailings Storage Facilities Using Polyethylene Terephthalate Fibers
Kitson, Maxwell
Design of a New Maintenance Shaft using RS3 Finite Element Analysis at St James Station, Hyde Park, Sydney
Kostadinovski, Michael
A Geotechnical Reconciliation Journey Implementing A Risk-Based Framework Utilising Unmanned Aerial Vehicle (UAV) Photogrammetry-Based Mapping
Lanter, Helene
Addressing Rockfall Risks Post-Grassfire in the Rhigos Mountains: A Case Study on Innovative Attenuator System Design
Latif, Anas Abdul
Geotechnical Assessment for Supporting Re-Mining TSF Gold Tailing Using Conventional Excavator and Trucks Method
Le Roux, Kim
Three-dimensional (3D) Rockfall Assessment for Landbridge Reclamation
Li, Jianping
Dragline Bench Stability in Open Cut Coal Mining
Li, Kunze
Evaluation of Shotcrete Performance Enhancement Using Bio-Admixture
Lim, Athena Bernice J.
Comparative Analysis of Cone Penetration Testing (CPT) and Standard Penetration Testing (SPT) in Assessing Liquefaction Potential in the Philippine Geotechnical Context
Louchnikov, V.
A Multi-Criteria Ranking Approach for Assessment of Geotechnical Data Uncertainty
Lynn, Mark
Addressing Rockfall Risks Post-Grassfire in the Rhigos Mountains: A Case Study on Innovative Attenuator System Design
Mafaza, Femalda
Geotechnical Assessment for Supporting Re-Mining TSF Gold Tailing Using Conventional Excavator and Trucks Method
Magnusson, Jimmy
Swedish Road Cuttings – National Inventory, Definition and Risk Status
Maldonado, Arturo
The DAC and Model Confidence in Iron Ore Deposits
Mantal, Ma. Rosella B.
Ground Improvement through Permeation Grouting
Marchelli, Maddalena
A New Tool to Quantify the Failure Probability of Rockfall Net Fences
Marchelli, Maddalena
Synthetic Slope Profiles to Assess Rockfall Hazard on Open Pit: Influence of Topography Uncertainties
Marulanda, L.
RS3 Stability analysis of cemented pasted-backfilled stopes transitioning from open pit at an Argentinian gold mine
Mbedzi, Abercon
Slope Stability Analysis of a Surface Portal: A Case Study of a Platinum Mine
McQuillan, A.
3D Finite Element Analysis of Sub-Level Caving Plan for Indicative Ground Support Requirements at Bozymchak Mine, Kyrgyzstan
McQuillan, Alison
Peer-Review Statements
McQuillian, Alison
RS2 as a Tool for Simplified and Effective Analysis of Urban Tunnel-Induced Settlements
Melendez, Stefhany
Slope Stability Analysis of an Open-Pit Mine Using 3D LEM and 3D FEM
Merritt, A.
Impacts of Sydney Metro City & Southwest Tunnel Construction on Existing Rail Tunnels – Belmore Park Case Study
Migliazza, Maria Rita
Hybrid barriers and attenuators: full scale tests based on a reliability-design approach for actions and resistances, aimed to calibrating numerical models
Minaya, Jean
Validation of failure surfaces of a heap leach pad in the Peruvian Andes using LEM and SSR method
Miraei, Seyed Mohsen
Numerical Analysis of The Drained/Undrained Behaviour of Clays From Self-Boring Pressuremeter Test
Mitelman, Amichai
RS2 as a Tool for Simplified and Effective Analysis of Urban Tunnel-Induced Settlements
Mo, Dylan
Three-Dimensional Stability Assessment of a Tailings Embankment Adjacent to an Existing Open Pit
Mohd-Nordin, Mohd Mustaqim
Multi-scale Characterization of Sandstone-Shale Interbedded Formations: Integrating Rock Material Properties for Stability Analysis
Msibi, B.
Feasibility of Reinforcing Tailings Storage Facilities Using Polyethylene Terephthalate Fibers
Mudenge, S. T.
Feasibility of Reinforcing Tailings Storage Facilities Using Polyethylene Terephthalate Fibers
Mudenge, Shiella
Slope Stability Analysis of a Surface Portal: A Case Study of a Platinum Mine
Myburgh, Keshia
Digital Innovations in Slope Stability: Addressing South Africa’s Unique Challenges
Nadalini, Matteo
Hybrid barriers and attenuators: full scale tests based on a reliability-design approach for actions and resistances, aimed to calibrating numerical models
Naidoo, Salona
Digital Innovations in Slope Stability: Addressing South Africa’s Unique Challenges
Naufal, M. Ilham
Geotechnical Assessment for Supporting Re-Mining TSF Gold Tailing Using Conventional Excavator and Trucks Method
Neto, Osvaldo de Freitas
Numerical Simulation of Compression Loaded Small-Diameter Defective and Intact Bored Piles
Nguyen, Ba-Phu
Numerical Analysis of The Drained/Undrained Behaviour of Clays From Self-Boring Pressuremeter Test
Nguyen, T.
Enhancing Slope Stability Analysis with Accurate Representation of Rock Bridges and Discontinuities
Oh, Joung
Evaluation of Shotcrete Performance Enhancement Using Bio-Admixture
Olivares, J.
RS3 Stability analysis of cemented pasted-backfilled stopes transitioning from open pit at an Argentinian gold mine
Oliveira, João Vitor
Determination of Slope Excavation Rate Considering Pore Pressure Dissipation Through Back-Analysis
Osorio, Arvic
Slope Stability Analysis Using Limit Equilibrium and Finite Element Methods for Pit Tsunami Risk Assessment in Cadia Hill Open Pit
Player, John
Fine-Tuning the Design: Practical Application of Discrete Fracture Networks in 3D Finite-Element Models
Poulos, Harry G.
Simplified Solutions for a Pier in a Two-Layered System and subjected to Lateral and Moment Loadings
Pournaghiazar, M.
Impacts of Sydney Metro City & Southwest Tunnel Construction on Existing Rail Tunnels – Belmore Park Case Study
Rachmad, Lufi
Geotechnical Assessment for Supporting Re-Mining TSF Gold Tailing Using Conventional Excavator and Trucks Method
Ramandi, Hamed Lamei
Evaluation of Shotcrete Performance Enhancement Using Bio-Admixture
Rojas, Laura
Validation of failure surfaces of a heap leach pad in the Peruvian Andes using LEM and SSR method
Russell, Adrian R.
Efficient Simulation of Tunnel-Induced Failure in Brittle Rock Based on a Mesh-Independent Fracture Mechanics Approach
Russell, Jock
Design of Ground Support to Meet the Challenges present in Tall Tunnels in a High Stress and High Movement Environment in Sydney, Australia.
Saeidi, Ali
Evaluating Vertical Stress in Backfilled Inclined Mine Stopes: Insights from Numerical Modeling and Monte Carlo Simulations
Saydam, Serkan
Evaluation of Shotcrete Performance Enhancement Using Bio-Admixture
Seidu, Mustapha
Stability Risk and Economic Analysis of Steepened East Wall of Huni Pit- A case study
Selivanov, D.
A Multi-Criteria Ranking Approach for Assessment of Geotechnical Data Uncertainty
Seymour, C. R. W.
Enhancing Slope Stability Analysis with Accurate Representation of Rock Bridges and Discontinuities
Silva, Ariadne Martins
3D Anchored Retaining Wall Stability Analysis
Silva, João Paulo de Sousa
Assessment of NorSand’s Performance under Zero Strain Boundary Conditions
Sjoberg, Mark
Transberg Method. From Drone Flight to Hazard Map – adding value to Open Pit Geotechnical Assessments
Smagulov, D.
3D Finite Element Analysis of Sub-Level Caving Plan for Indicative Ground Support Requirements at Bozymchak Mine, Kyrgyzstan
Smith, Adrian
Brisbane’s Cross River Rail Project, Assessment of Cavern and Shaft Interaction for Albert Street Station
Sousa, Rita Leal
Seismic Landslide Risk Assessment: Random Large-Deformation Analysis in Spatially Cross-correlated Cohesive-Frictional Soils
Souza, Tiago de Jesus
Recent Innovative Interpretation of Root Pile Length Using Magnetometry
Strang, Daniel
Three-Dimensional Stability Assessment of a Tailings Embankment Adjacent to an Existing Open Pit
Sweby, Gordon
Fine-Tuning the Design: Practical Application of Discrete Fracture Networks in 3D Finite-Element Models
Taboni, Battista
Hybrid barriers and attenuators: full scale tests based on a reliability-design approach for actions and resistances, aimed to calibrating numerical models
Tang, Qianhao
Investigating Thermal Damage of Sandstone
Tang, Qianhao
Machine Learning-Based Estimation of Unconfined Compressive Strength and Deformation Modulus of Heated Gold Coast Sandstones
Tapia, Jimmy
Validation of failure surfaces of a heap leach pad in the Peruvian Andes using LEM and SSR method
Tashtanov, M.
3D Finite Element Analysis of Sub-Level Caving Plan for Indicative Ground Support Requirements at Bozymchak Mine, Kyrgyzstan
Thoeni, Klaus
Monitoring and Prediction of Coastal Rockfall Hazard: An Application of RocSlope3 in Newcastle (Australia)
Thoeni, Klaus
Application of a New Stochastic Rockfall Fragmentation Approach For Lumped Mass Simulations
Thoeni, Klaus
The Influence of Material Layers on the Prediction of Rockfall Hazards for Highwalls
Torio-Kaimo, Lestelle V.
Ground Improvement through Permeation Grouting
Torio-Kaimo, Lestelle V.
Development of Empirical Correlations between Shear Wave Velocities (Vs) and Standard Penetration Test (SPT) N-Values of Soils
Torio-Kaimo, Lestelle V.
Correlation Between the In-Situ Soil Conditions and Strength of Jet Grout Soilcrete by a Double-Fluid System
Torio-Kaimo, Lestelle V.
Comparative Analysis of Cone Penetration Testing (CPT) and Standard Penetration Testing (SPT) in Assessing Liquefaction Potential in the Philippine Geotechnical Context
Tung, Shih-Heng
Numerical Study on the Response of Buried Pipelines to Deep Excavations
Tung, Shih-Heng
A Study on the Automated Identification of Rock Fractures Using Yolov8
Umili, Gessica
Hybrid barriers and attenuators: full scale tests based on a reliability-design approach for actions and resistances, aimed to calibrating numerical models
Vagnon, Federico
Hybrid barriers and attenuators: full scale tests based on a reliability-design approach for actions and resistances, aimed to calibrating numerical models
Valdez, Michael Angelo M.
Development of Empirical Correlations between Shear Wave Velocities (Vs) and Standard Penetration Test (SPT) N-Values of Soils
Van Rensburg, Jan Janse
Three-dimensional (3D) Rockfall Assessment for Landbridge Reclamation
Villarreal, Eliza Alejandra Rios
Numerical Simulation of Compression Loaded Small-Diameter Defective and Intact Bored Piles
Vogt, Stefan
Numerical Analysis of The Drained/Undrained Behaviour of Clays From Self-Boring Pressuremeter Test
Watman, Abigail
Monitoring and Prediction of Coastal Rockfall Hazard: An Application of RocSlope3 in Newcastle (Australia)
Watman, Abigail
The Influence of Material Layers on the Prediction of Rockfall Hazards for Highwalls
Watton, James
Three-dimensional (3D) Rockfall Assessment for Landbridge Reclamation
Wei, William
Design of Ground Support to Meet the Challenges present in Tall Tunnels in a High Stress and High Movement Environment in Sydney, Australia.
Wilcox, Lucia
Slope Stability Analysis Using Limit Equilibrium and Finite Element Methods for Pit Tsunami Risk Assessment in Cadia Hill Open Pit