Atlantis Highlights in Engineering

The development of science and technology in various parts of the world is influenced by progress in the field of mathematics. Therefore, the countries that ignore mathematics education as a top priority will be left behind from other countries that provide a place for mathematics as an important subject....

MIMO technology is widely recognized for its ability to boost data rates and system performance. Although MIMO systems leverage multiple antennas for spatial diversity, their effectiveness is impacted by antenna spacing, coupling, and interference. The envelope correlation coefficient (ECC) is employed...

The transportation and civil construction sectors have placed higher demands on the study of the stability and mechanical behavior of geotechnical materials. In particular, the precise simulation of the microstructure of rock masses is critical for engineering design and safety assessments in tunnels...

The deterioration of the natural environment has attracted the attention of a wide range of scholars, and there has been a gradual increase in research on sustainable supply chains. In this paper, we consider the supply chain of joint decision making for inventory and sustainability technology investment....

This research aimed to produce Lower Secondary Mathematics Teaching Materials with the Scientific Approach Oriented to Problem Solving Ability including Lesson Plan (RPP), Student Working Sheet (LKS), and a valid, practical and effective student Learning Achievement Test (TPB). This type of research...

Energy Internet represents the direction of the world's future energy development, is an important means to promote the energy revolution, the traditional power grid enterprises need to adapt to the changes of the energy Internet, accelerate the transformation to the energy Internet platform type...

The critical state theory has been widely applied in geotechnics, and understanding the mechanical and geotechnical properties of particulate materials is one of the major challenges nowadays. In the mining industry, this is a concern regarding tailings storage facilities, that experience transitions...

The frequency and depth of routine inspection of the operation status information of the completed bridge are far from the requirements of grasping the health status of the bridge, so it is necessary to design and establish a modern, automatic and intelligent operation monitoring system. Taking Nanjing...

In today’s world of work, the rate of competition among job-hunters is getting increasingly higher. In addition, some companies want to recruit human resources who have more work skills and knowledge in order to improve their quality and productivity. Both skills and knowledge are necessary regardless...

Pronunciation is an interdisciplinary subject, and speech recognition is gradually becoming the key technology of man-machine interface in information technology. In recent years, the application of computer speech recognition has made great progress. Based on the special status of English, there have...

This study identifies potential risk events in maintenance and repair activities involving working at heights for port equipment and facilities, and analyzes the risk factors contributing to such events. Based on the process management methods for working at heights, key on-site safety risk prevention...

Dielectric ceramic materials are extensively utilized in microwave applications, such as satellite communication, due to their high dielectric constants and quality factors. Calculating the quality factor has become increasingly essential due to the various combinations of mixtures used. In this study,...

As a result of the intense exploitation of mineral resources on the surface, mining excavations must migrate to deeper environments. At greater depths, in-situ stresses increase along with the probability of rockburst occurrence. Different authors have studied this phenomenon in depth, however, the influence...

Entrepreneurial environment is a key factor to promote entrepreneurial activities. Through four studies, implicit research methods and SEM were applied to construct and verify the six-factor implicit evaluation model of the entrepreneurial environment in Dongguan. In Study 1, from 11 unstructured interviews,...

The application of technology has developed in the field of traffic. The occurrence of traffic violations and an increase in the number of accidents triggered by the speed of vehicles that exceed the maximum limit specified. It especially two-wheeled vehicle or motorbike. The small form of a motorbike...

Flow characteristics are the driving force to the riverbed evolution in straight channel with crisscross bars. The variation laws of longitudinal velocity, transverse velocity and turbulent intensity were studied by flume experiment. The results show that: ① the longitudinal time-average velocity decreases...

In order to understand the effect of wind load on the force state of tower crane, the finite element model of tower crane was established by using Midas Gen software, and the stress and deformation analyses of tower crane were carried out. The results show that the dangerous parts of the tower crane...

Intelligent transportation systems are now starting to develop. One aspect of the intelligent transportation support system is how to recognize a vehicle. Vehicle plate recognition is an important function of this system. Plate detection systems have two problems, namely where the plate is located and...

Environmental sustainability and resource optimization depend on efficient waste management. This article offers a smart system that promotes a circular economy, enhances recycling efficiency, and automates waste categorization. The system uses an automated gripper arm, computer vision-based object detection,...

The aim of this research is to compare the gravitational acceleration based on the two different apparatus measurement. That two apparatus are similar, use free fall setting. That difference is in time record method. This gravitational acceleration determined from metal ball fall’s time in a predetermined...

The multi-expansion anchor rod is a new type of anchor rod, which is designed to solve the problems of insufficient anchorage force and limited anchor rod length in traditional anchor rods used in slope support applications. The multi-expansion anchor rod expands the contact area with the rock and soil...

The aim of this research is comparison wood-metal load system (experiment 1) and wood-sand load system (experiment 2) to find the static friction coefficient on wood and the effectiveness of both system. This study used a descriptive quantitative approach by using graphical analysis method, the manipulation...

The true using of cosmetics will give so many good effects such as healthy, elastic and younger face, otherwise bad using of cosmetics can cause many problems such as Acne, spot, oily skin and dry skin. This clinical research using nanogold and nanoseaweed was aimed as a solution for negative effect...

In this paper, the MATLAB software is adopted to develop the system coupling model to calculate the comprehensive index and coupling level of the two systems of higher vocational education structure and industrial structure in Guangdong Province from year 2015 to year 2021. In addition, the dynamic evolution...

This study introduces an innovative approach to address the urgent need for sustainable energy storage by maximizing solar energy utilization and ensuring efficient distribution and storage through integrated solar panels and a dual-battery system. Key components such as rechargeable batteries and charge...

This research aims to analyze college students’ misconception on optical concept. Participants were 36 college students of sixth semester from one intact class. College students’ misconception of geometrical optics were measured by a three-tier misconception test. From the data collected we were determined...

Flowable soil cement has high fluidity and is a self-leveling, low-cost material that can be used under various complex working conditions. The experiment used loess from the Qilihe District, Lanzhou City, Gansu Province as the base soil, cement and sandstone as auxiliary materials, soil stabilizer as...

This study presents the design and simulation of a microstrip patch antenna using polyimide as a flexible substrate, making it wellsuited for wearable medical applications. The antenna operates at a resonant frequency of 4.143 GHz, achieving a return loss (S11) of -37.17 dB and a VSWR of 1.028, indicating...

This paper present the description of students’ reasoning on physics related to visual representation. This research used descriptive qualitative method. The subjects consist of 25 college students. Given some physics problem with visual representation, students answer it with different reasoning. Students...

With the continuous improvement of people’s living standards, equestrian sports have gradually entered people’s field of vision. Equestrian sports, as a sport with great ornamental and competitive value, can not only provide high-quality sports services, but also create more employment opportunities...

Fostering problem solving-skills on prospective science teacher is a challenging task, yet problem-solving skills is needed in 21st century live. The aim of this study is to foster problem solving skill on prospective science teacher through problem-solving tasks on sprint exercise theme. Method of this...

With the technological advancement in image processing like color photography, matching and inspection and survey of the images, large scale issues on counterfeit currencies have been occurring. This work focuses on automatic paper currency recognition especially in banking systems, foreign exchange...

In response to the high maneuverability demands of kelp harvesting vessels during row-changing operations, this study employs a screw propeller instead of traditional propellers as the propulsion device. To ensure that the screw propeller meets the requirements for kelp harvesting vessels, the study...

The purpose of this study was to describe the validity of the project based laboratory learning (PjBLL) model to increase science process skills and scientific creativity of students. Collecting data use preliminary research and validation phase of physics learning expert in the focus group discussion....

This article uses SPSS software to conduct WLS regression and path analysis on the 2015 CGSS data. The factors affecting Chinese residents' subjective well-being were empirically tested. It is found that education level has a positive effect on Chinese residents' happiness, and income level...

Oxidation Ditch Algae Reactor (ODAR) is a wastewater treatment reactor utilizing symbiosis between algal cultures and bacteria. ODAR reactors have large circular basin equipped with aerators. Pathogenic Escherichia coli is believed to mostly live in the contaminated area, which it could influence human...

The growing sophistication of jamming tactics poses considerable difficulties to radar system performance, endangering national security by reducing detection and response to possible attacks. This study looks into the critical issue of maintaining radar detection efficiency in the presence of advanced...

Scientific research evaluation is the baton of scientific and technological innovation. Researches mostly focus on visualized analysis of scientific research management, and lack of visualized analysis of scientific evaluation in colleges and universities. Based on the knowledge mapping visualized analysis...

With the rapid development of urban rail transit, the early warning of equipment failure and maintenance decision-making is particularly important. Based on deep learning algorithm, this paper proposes a method for the optimization of early warning and maintenance decision-making of key equipment failure...

The 2nd generation HDPE Recycle Hot Press machine is the revamps of the first generation machine. The first generation hot press still has many shortcomings that make production results not optimal, such as porosity defects, limited product dimensions and the manual pressing process. The method used...

Machining processes are spent a lot of energy in the manufacturing industry. On the other hand, we understand that energy should be minimum. The purpose of this study is to find the optimal machining parameters that allow the most energy-efficient processes. The study focused on optimization of parametric...

In the alluvial plain area of the Ush Talar River, there is a widespread distribution of fine saline soils. Due to the special properties of fine saline soils, they are highly prone to issues such as salt heaving, thaw settlement, and mud pumping, which often cause harm to engineering structures. Water-salt...

The medical insurance fund is an important guarantee for people's health. It is of great significance for the country to maintain the people's livelihood by timely discovering illegal acts and avoiding fund losses. Due to the characteristics of high dimension, large quantity and complex data...

This research aimed to discuss the manufacturing of The Heat Exchanger Cooler Type U-Tube with 2 types of fluid, water as cold fluid and oil as hot fluid, which flew in opposite direction. There were 2 methods which used in this research, the empirical method and the experimental method. The empirical...

hot plate, magnetic stirrer, infrared MLX90614, PID controller

A periodic oscillation in the working chamber pressure was observed in the pressure test data of the recoil mechanism, with an amplitude accounting for 6% of the maximum pressure. This pressure fluctuation affects the calculation of the hydraulic resistance of the recoil mechanism. In previous studies,...

In the rapid development of the Internet economy, the ability to get close to the end customer, share distribution costs equally, and shorten delivery times are becoming increasingly important. This paper proposes a practical, efficient, stable, and innovative approach for optimizing distribution routes....

How to build a corn dryer that is not weather dependent yet energy efficient? And how the characteristics of corn dryer?. This research objectives are: Design and develop a dehumidifier heat pump dryer for corn drying. Observing the characteristics of drying time, temperature and humidity of drying air...

This study employs sulphoaluminate cement as the primary solidifying agent and municipal solid waste incineration bottom ash as the auxiliary solidifying agent to conduct solidification treatment on leachate sludge from domestic waste landfills. The results indicate that: (1) Sulphoaluminate cement demonstrates...

The operation of the Water Treatment Plant (WTP) requires electrical energy to drive chemical systems, namely dossing pumps and chemical mixers and lighting lamps. In WTP, most of the gravity systems are located far from settlements and most of the access roads are quite difficult, and there is no electricity...

The iterative update of software leads to frequent continuous integration, so the testing in the continuous integration environment should also be fast and accurate. Reinforcement learning is often used in the research of continuous integration testing because of its sequential strategy and good robustness....

Renewable energy is environmental-friendly energy compared to the conventional one. Wind energy is a renewable energy having big potential in supporting clean energy revolution in Indonesia. This research aims to calculate the wind energy potential power that can be used as a power plant. The data collection...

Modeling of wind speed characterstic in a particular location is often conducted, one of which is to find out the potential of wind energy in the interest of wind power plants. Of the many probability distributions, the following distributions are distributions that are quite commonly used to model the...

Aiming at the vibration problem of the high-precision ship-borne printer in extreme environments, this paper conducts a systematic study of the dynamic characteristics. First, the finite element method is used to analyze the first six modes of the printer, revealing its natural frequencies and mode shape...

A study was performed on the production of sago pulp composite board and characterization of its mechanical property, i.e. tensile strength test. Sago pulp composite board was made using resin epoxy amplifier. A sago tree can produce 75-85% sago pulp which contains 65.7% starch, 21% lignin, and 20% cellulose....

Aiming at the possible community safety problems faced by property companies, the evaluation index system under the background of big data is established. Relevant independent variables and research hypotheses were designed, a research model was established through the analysis of relevant safety theories,...

The thermal condition in lease houses in Merauke is very uncomfortable, one of the causes is that the existence of home furniture that are not well organized in many lease houses causes the circulation of space to be not smooth. With the condition of a narrow house with more and more needs, the need...

The accuracy of soil mechanical parameters has an important impact on the numerical simulation results of foundation pit engineering. Since the soil parameters often change during the construction process, the parameters need to be dynamically corrected in order to improve the accuracy of numerical simulation....

Wick must provide in order that heat pipe can be operate in any orientation. Wick provide the driving forces to circulate working fluids. A novel sintered molecular sieve and hybrid molecular sieve-Cu would be use as wick heat pipe. This paper presents the results of investigation on porosity and microstructure...

The purpose of this study is to increase the coefficient of performance (COP) of the split air conditioner (SAC) by reducing the compressor work and increasing cooling capacity which can be achieved with a two phase ejector as an expansion device with novel design dual evaporator temperature. Numerical...

In recent years, the regional GDP prediction has become an efficient tool to coordinate economic development. This paper aims to study the regional GDP prediction and build a novel machine learning model with taking the entropy method into consideration to predict the future GDP values. This research...

The copper coating process on multi-walled carbon nanotubes (MWCNT) has been carried out by electroless plating method to improve interfacial bonding between MWCNT and alumininium matrix. The initial step of electroless plating is to pre-treat MWCNT which includes oxidation (hydrophilic treatment), sensitization...

In the construction of gas-rich tunnels, the design and performance of the ventilation system are critical to ensuring construction safety and operational efficiency. This study utilizes numerical simulation and comprehensive analysis to evaluate and compare the performance of straight joints and Y-joints,...

The Balinese people cannot be separated from their cultural and religious customs. The religious procession for Balinese people is conducted to express our gratitude to Ida Sang Hyang Widi Wasa (The Almighty God) for the gift he has given. One of the ceremonial facilities used is tumpeng, and in aseries...

BIM technology is an active application and innovation of the new generation of information technology in the civil engineering industry, playing a positive role in project planning, design, construction, and operation maintenance.Numerical simulation technology can replace experiments, such as analyzing...

The fluctuating wind pressure in local areas of high-rise buildings exhibits strong volatility, which is affected by airflow separation and vortex shedding, making its probability distribution no longer conform to Gaussian distribution. This article takes the wind pressure test data of Shanghai Global...

Components in the field of transportation that greatly affect the amount of transportation costs are fuel, tires and maintenance costs. On average, a tire used by commercial vehicles such as a truck, must replace all of six tires every 3 months, with a cost of approximately 1.5 to 2 million rupiah on...

All of the articles in this proceedings volume have been presented at the 3rd International Conference on Applied Science and Engineering (ICASE2023) during June 16–17, 2023 in Ulaanbaatar, Mongolia. These articles have been peer reviewed by the members of the editors, international committee and approved...

In order to stimulate the innovation vitality of young scientific and technological innovation talents in China, Application of PEST Analysis for Systematic Analysis of Youth Science and Technology Innovation Talent Cultivation in Shanghai: Construction of Cultivation Index Model. Empirical Study Using...

In this study, a geotechnical tunnel surrounding rock stability analysis model is established based on the random forest algorithm in order to improve the accuracy and reliability of surrounding rock stability prediction in tunnel engineering. Through testing and data collection of geotechnical parameters,...

Solar photovoltaic (PV) systems operate during long time periods and produce a vast number of data. Traditional data collection employs a manual method with conventional instruments such as multimeters and thermocouples, which is a time-consuming process. Automatic-sensor based data acquisition (DAQ)...

Heat exchanger has wide use in many application such as in food industries, chemical, transportation, and refrigeration and air conditioning. Fan coil unit (FCU), one class of heat exchanger which is heat transfer occur by chilled water flowing across a series of finned tube bank for decreasing the air...

The purposes of this research was to investigate and analyze the effect of fluid flow variation to the performances of tube and fins radiator type. The research was done experimentally to analyze the heat transfer rate and the effectiveness of the radiator. The experiment research was carried out in...

To address the stability issue of guest soil in the ecological restoration of high-steep rock slopes, an anchor-double net-baffle (ADNB) slope ecological protection system was proposed. This system formes a three-dimensional flexible structure with anchors, double nets and baffles. Indoor rainfall simulation...

Local government fiscal revenue is the foundation and guarantee for the realization of government functions. Therefore, whether regional collaborative development policies can improve the level of local government fiscal revenue is an important basis for regions to respond to regional development policies....

This progress report contains about the achievement of the implementation of the program of research in the development of teaching materials in the form of an integrated jobsheet. The second stage of the development will be done in 2018 with the goal to find: 1) the evaluation result from the expert,...

As natural refrigerant, carbon dioxide has excellent thermo physics, safe, nontoxic and cheap. This reason causes the CO2 becomes the best refrigerant alternatives. However, CO2 refrigeration system still has relatively low performance when operate in hot environment temperature. This study aims is to...

This paper explored the colligation of “V + Reform” and the semantic prosody of “reform” in the corpus of Chinese Government Work Reports (GWRs) from 2013 to 2022 built with 146087 tokens, and then contrasted the results with those in American State of the Union Addresses (SOTUs) with the purpose of...

This study focuses on development of corn-oil ester and tap water mixtures as novel solid-liquid phase change material (PCM) candidates for low temperature refrigeration applications with product temperature between -20 °C and -10 °C. Thermal properties of both tap water and its mixture with corn-oil...

Based on the monitoring data from a specific base's vacuum joint loading pre-pressure reinforcement project, this analysis delves into aspects such as surface settlement, layered settlement, pore water pressure, and horizontal displacement. The findings reveal that variations in the foundation soil...

As a family of heat pipe, oscillating heat pipe (OHP) has many additional unique operating parameters. This paper examined the characteristic of temperature evolution from start-up until dry-out stage of an OHP with extra-long dimension using methanol as the working fluid. The temperature evolutions...

Integrated management and control in the field of technology and communication is an awareness of the importance of the role of information systems and technology in supporting operational activities and services in an organization and government agency. This study will discuss the evaluation of the...

A sensitivity analysis was conducted on two local geological parameters of the tailrace outlet slope at a pumped storage hydropower station to evaluate their influence on local geological displacement and the overall extent of the plastic zone. The analysis aimed to identify the critical factors influencing...

The comprehensive land reclamation of the whole area is a systemic project to improve the production, living conditions and ecological environment of rural areas, promote large-scale agricultural operations, concentrated population living and industrial development, and promote the process of urban-rural...

The rapid development of information technology, especially in the information systems area, has brought an easy to implement efficient work. Today, the most company still performs their business process manually, such as in conducting reseller search and assessing the performance of resellers tasks...

Laboratory management must be taken seriously and regularly, such as recording items in and out, students who enter to do scheduled lab work or free practicum and lecturer activities in conducting research can be recorded in a system. For this reason, an information system is needed to handle the recording...

Uncertainty is a typical characteristic faced by enterprises. Institutional theory holds that uncertainty can help enterprises improve the value of fulfilling their social responsibilities. This paper discusses the conditions of the application of real option logic to corporate social responsibility...

This study investigates the compaction characteristics of fragmented gangue in residual mining areas, addressing stability challenges during upward mining of abandoned coal resources in China. Through confined compression tests using a WES-1000B electro-hydraulic servo testing machine, we examined the...

CryptoCurrency has now spread its development as a medium of exchange and as a commodity that is traded 24 hours nonstop on various exchanges throughout the world. The basic nature of trading on cryptocurrency is how to obtain the lowest buying/price point and how to sell it at a higher price. This paper...

Video game industry has been steadily growing as a lucrative entertainment business for decades. Alongside the growth, consumer’s demand for bigger video games with more contents to explore and enjoy has also been on the rise. The demand naturally translates to higher development cost to developers of...

The rapid development of the intelligent connected vehicle industry has led to a significant demand for talent. However, traditional teaching methods are unable to meet the requirements of actual job positions, posing challenges for vocational education institutions in cultivating intelligent connected...

Rocks may undergo changes in internal structural integrity due to the coupling of cyclic loading and acidbase corrosion (CL-AC), which can subsequently alter their mechanical properties. Based on uniaxial compression tests with acoustic emission, the coupling of CL-AC on the mechanical behavior of sandstone...

Traveling sales problem (TSP) is one of the classical optimization problems and NP-complete. The Challenge in implementing TSP is how to determine the shortest distance from a traveling route of N cities where each N city visited precisely once at time. In this paper, we attempt to analyze the completion...

Objective To construct a contradiction matrix for rule of law in drug safety governance, provide scientific tools for solving drug safety governance problems, and improve the level of rule of law in drug safety governance. Methods Firstly, the problems in the rule of law of drug safety governance were...

Marketing methods for selling software have experienced many changes. In-app Purchase Method (IAP) is one of the breakthrough solutions in selling a freemium software, where users can download and use the application for free, but there are premium features that must be paid. One of the challenges on...

Accurate sales forecasting is needed by all companies, including by small and medium garment enterprises to be used in financial management. Accurate sales forecasting will make better inventory management, which indirectly gives benefit to the company. Limitation of human in forecasting sales without...

Based on the engineering case of a gently inclined bedding rock slope containing weak interlayers, this study summarizes the engineering characteristics of weak interlayers and preliminarily determines that the slope failure mode is bedding slip-tensile cracking, with the weak interlayer being the primary...