Proceedings of the International Conference on Recent Advances in Materials, Processes and Technology for Sustainability (RAMPTS 2025)
International Conference on Recent Advances in Materials, Processes and Technology for Sustainability (RAMPTS 2025)
📍Thrissur, India🗓️ 9-11 October 2025
153 authors
- Rajeev, V. R.
- Comparative Tribological Studies of A356 Alloy and A356/5 Wt.% Sicp Composite at Low Parametric Conditions During Unidirectional and Reciprocating Contacts
- Rajesh, S. P.
- Processing and Characterization of Eichhornia Crassipes Fiber Reinforced Hybrid Polymer Composites
- Rani, S.
- Lubricant base stock development from HDPE plastic pyrolysis oil and modified palm oil
- Ranjana, R.
- Hazop and Hazid Analysis of Ammonia Barge Leaks
- Ratnakaran, Harikrishnan Usha
- Modular Layout Design of Electric Catamaran Ferries for Inland Waterways Using Python
- Renjith, V. B.
- Optimization based on visualization experiment for stir casting of Aluminium Hybrid Metal Matrix Composites
- Rinchu, P.
- Shock Flow Behavior and Shock Management Over Supersonic Wedge Shapes with Enhance Surface Features: A Comprehensive Review
- Rinchu, P.
- Pitting Corrosion Studies of Laser Beam Welded Hot and Cold Rolled Nb-Stabilized 5A Duplex Stainless Steel
- Roby, P. S.
- Peer-Review Statements
- Sahid, Muhammed
- Modular Layout Design of Electric Catamaran Ferries for Inland Waterways Using Python
- Saibi, R.
- Development of a D-Limonene based Binder for Sulfur Cathodes in Lithium-Sulfur Battery
- Saifudeen, Aashna
- Immobilized Nitrogen-Doped TiOâ‚‚ Nanoparticles on Electrospun Polyacrylonitrile Fibres: Performance Evaluation in a Tubular Photocatalytic Reactor
- Sajeevan, Nandana
- Adaptive sliding mode control with Gaussian process regression for trajectory tracking of remotely operated underwater vehicles
- Sajith, C.
- Optimization based on visualization experiment for stir casting of Aluminium Hybrid Metal Matrix Composites
- Sam, Sharon Mathew
- Development of a D-Limonene based Binder for Sulfur Cathodes in Lithium-Sulfur Battery
- Santhosh, Drisya
- Characterization of high entropy alloy reinforced AA7068 Composite developed through stir casting
- Sanukrishna, S. S.
- Processing and Characterization of Eichhornia Crassipes Fiber Reinforced Hybrid Polymer Composites
- Sarath, P. V.
- Modelling human Tibio-Femoral cartilage response by FEA using simple alternative material models
- Saritha, M.
- Circular Biohydrogen Systems: Hybrid Biological Strategies in Dark Fermentation
- Sasi, Anaina
- Synthesis of Waste-Derived Nanocellulose and Its Integration with PBAT for Enhanced Performance in Sustainable Bioplastics
- Sasidharan, Baiju
- Comparative Study on Mechanical and Metallurgical Characteristics of Friction Welded Joints from Al 6061 and Mg AZ31B by Varying Interface Geometries
- Sasidharan, Baiju
- Mechanical and Metallurgical Evaluation of Friction Welded Joints Formed with Rotating Al 6063 with Flat Interface and Al 6082 with Taper Interface
- Sasidharan, Baiju
- Lubricant base stock development from HDPE plastic pyrolysis oil and modified palm oil
- Satheesan, Aiswarya A.
- Influence of Thixotropic Behavior on Extrusion-Based 3D Printing
- Satheesh, Nithil
- Metrological Evaluation of Surface Quality in Minimum Quantity Lubrication of AISI 52100 Steel During Turning Operations
- Sathyanarayanan, Vimal
- Experimental Analysis of Corrosion and wear behavior of Mg 5.5 Zn Bio-implant alloy
- Selvakumar, A.
- Prototyping of Screw drive In-pipe Robot for straight and curved pipe
- Shalij, P. R.
- Effect of Heat Treatment on Microstructure and Mechanical Properties of Mg-5.5 Zn Alloy
- Sidharthan, S.
- Adaptive sliding mode control with Gaussian process regression for trajectory tracking of remotely operated underwater vehicles
- Sigikumar, T. S.
- Processing and Characterization of Eichhornia Crassipes Fiber Reinforced Hybrid Polymer Composites
- Soman, A. R.
- Risk Assessment and Mitigation Measures in Chemical Process Industry Using FTA, FAHP & ALOHA
- Sreejith, B. J.
- Processing and Characterization of Eichhornia Crassipes Fiber Reinforced Hybrid Polymer Composites
- Sudeep, U.
- Prototyping of Screw drive In-pipe Robot for straight and curved pipe
- Sudeep, U.
- Pitting Corrosion Studies of Laser Beam Welded Hot and Cold Rolled Nb-Stabilized 5A Duplex Stainless Steel
- Suneesh, S. S.
- Prototyping of Screw drive In-pipe Robot for straight and curved pipe
- Suresh, Sreya
- Metrological Evaluation of Surface Quality in Minimum Quantity Lubrication of AISI 52100 Steel During Turning Operations
- Syama, S.
- The Effect of Redox Couple on Gold-Coated PCB Electrode
- Tan, C. M.
- Lithium-Ion Battery Safety: Hazards, Mechanisms, and Mitigation Strategies
- Teja, Vangara Chandra Surya
- Lithium-Ion Battery Safety: Hazards, Mechanisms, and Mitigation Strategies
- Thomas, Avin K.
- Barrier Definition and Management of Ammonia Storage Facility
- Thomas, J. Joshua Chellson
- Lithium-Ion Battery Safety: Hazards, Mechanisms, and Mitigation Strategies
- Tide, P. S.
- Process intensification in chemical reactors: An overview in the heat exchanger perspective
- Vaishnav, S.
- Metrological Evaluation of Surface Quality in Minimum Quantity Lubrication of AISI 52100 Steel During Turning Operations
- Varghese, Joy
- Influence of Thixotropic Behavior on Extrusion-Based 3D Printing
- Varghese, Jyostna
- Immobilized Nitrogen-Doped TiOâ‚‚ Nanoparticles on Electrospun Polyacrylonitrile Fibres: Performance Evaluation in a Tubular Photocatalytic Reactor
- Varghese, V. M. Joy
- Improvement in Mechanical Properties of FB-TIG Welded AA6061 Using Laser Shock Peening
- Varma, Nandakishore
- Barrier Definition and Management of Ammonia Storage Facility
- Varughese, Roshin Thomas
- Improvement in Mechanical Properties of FB-TIG Welded AA6061 Using Laser Shock Peening
- Verma, Ajit Kumar
- Lithium-Ion Battery Safety: Hazards, Mechanisms, and Mitigation Strategies
- Vinai, J.
- Performance Evaluation of an Unconventional Orifice
- Vinod, J.
- Performance Evaluation of an Unconventional Orifice
- Warrier, Advaith Sudheer
- Performance Evaluation of an Unconventional Orifice
- Yadukrishnan, M.
- Metrological Evaluation of Surface Quality in Minimum Quantity Lubrication of AISI 52100 Steel During Turning Operations