Proceedings of the International Conference on Recent Advances in Materials, Processes and Technology for Sustainability (RAMPTS 2025)
International Conference on Recent Advances in Materials, Processes and Technology for Sustainability (RAMPTS 2025)
📍Thrissur, India🗓️ 9-11 October 2025
153 authors
- Abdulsamad, P. A.
- Effect of Heat Treatment on Microstructure and Mechanical Properties of Mg-5.5 Zn Alloy
- Abhijith, M. R.
- Immobilized Nitrogen-Doped TiOâ‚‚ Nanoparticles on Electrospun Polyacrylonitrile Fibres: Performance Evaluation in a Tubular Photocatalytic Reactor
- Abhilash, S. S.
- Processing and Characterization of Eichhornia Crassipes Fiber Reinforced Hybrid Polymer Composites
- Abraham, Jerin
- Hazop and Hazid Analysis of Ammonia Barge Leaks
- Ajeesh, K. N.
- AI-Enabled PPE Surveillance System to Enhance Safety Standards in Shipyards
- Ajith, P. M.
- Improvement in Mechanical Properties of FB-TIG Welded AA6061 Using Laser Shock Peening
- Al Ameen, A.
- Development of a D-Limonene based Binder for Sulfur Cathodes in Lithium-Sulfur Battery
- Al Ameen, A.
- Immobilized Nitrogen-Doped TiOâ‚‚ Nanoparticles on Electrospun Polyacrylonitrile Fibres: Performance Evaluation in a Tubular Photocatalytic Reactor
- Anagha, C. V.
- Modular Layout Design of Electric Catamaran Ferries for Inland Waterways Using Python
- Anandarajah, Gabrial
- Lithium-Ion Battery Safety: Hazards, Mechanisms, and Mitigation Strategies
- Angitha, S.
- Risk Assessment and Mitigation Measures in Chemical Process Industry Using FTA, FAHP & ALOHA
- Anooja, A. U.
- Effect of Heat Treatment on Microstructure and Mechanical Properties of Mg-5.5 Zn Alloy
- Anu, N.
- Minimizing Dust Explosion in Chemical Looping Combustion Process Using an Engineered Oxygen Carrier
- Archana, S. R.
- Minimizing Dust Explosion in Chemical Looping Combustion Process Using an Engineered Oxygen Carrier
- Arun, M. S.
- Attention-Enhanced Graph Neural Networks for Accurate Prediction of Elastic Properties in Crystalline Materials
- Babu, C. V. Sumesh
- Numerical Analysis of Geometrically Modified Ejector Refrigeration System
- Bhadra, K. K.
- Sensor-Integrated Automation for Maturity Detection in Ayurvedic Product Manufacturing Using Temperature and RGB Image Analysis
- Biju, N.
- Process intensification in chemical reactors: An overview in the heat exchanger perspective
- Biju, P. V.
- Comparative Tribological Studies of A356 Alloy and A356/5 Wt.% Sicp Composite at Low Parametric Conditions During Unidirectional and Reciprocating Contacts
- Bindu, M. D.
- Peer-Review Statements
- Bindu, M. D.
- Characterization of high entropy alloy reinforced AA7068 Composite developed through stir casting
- Bindu, M. D.
- Experimental Analysis of Corrosion and wear behavior of Mg 5.5 Zn Bio-implant alloy
- Chalakkal, Jetha Benny
- Adsorptive Removal and Optimization of Cu (II) Ions Using Bio-Derived Chitosan from Crustacean Shells: A Response Surface Methodology Approach
- Chatanathodi, Raghu
- Janus MoWC MXene for Efficient Nitrogen Reduction: A DFT Study
- Deepa, S.
- Peer-Review Statements
- Deka, Madhuryya
- Lithium-Ion Battery Safety: Hazards, Mechanisms, and Mitigation Strategies
- Devapriya, R.
- Adaptive sliding mode control with Gaussian process regression for trajectory tracking of remotely operated underwater vehicles
- Devika, E. G.
- Synthesis of Waste-Derived Nanocellulose and Its Integration with PBAT for Enhanced Performance in Sustainable Bioplastics
- Dhyan, V.
- Synthesis of Waste-Derived Nanocellulose and Its Integration with PBAT for Enhanced Performance in Sustainable Bioplastics
- Dileeplal, J.
- Circular Biohydrogen Systems: Hybrid Biological Strategies in Dark Fermentation
- Divya, N.
- Mapping Fault Tree Analysis to Artificial Neural Networks and Implementing in Google Colab
- Fazil, A.
- Assessment of Safety Margin for HAZMAT Transportation
- Francis, Delan
- Modelling human Tibio-Femoral cartilage response by FEA using simple alternative material models
- Gani, P. K. Abdul
- Recent Advances in Ceramic-Based Microbial Fuel Cells: A Comprehensive Review on Technological Developments, Performance Metrics, and Emerging Applications
- Gayatri, S. Lakshmi
- Development of a D-Limonene based Binder for Sulfur Cathodes in Lithium-Sulfur Battery
- George, Sara Sreya
- Recent Advances in Ceramic-Based Microbial Fuel Cells: A Comprehensive Review on Technological Developments, Performance Metrics, and Emerging Applications
- Gokul, H.
- Recent Advances in Ceramic-Based Microbial Fuel Cells: A Comprehensive Review on Technological Developments, Performance Metrics, and Emerging Applications
- Habid, Abdul
- Development of a Water-Soluble Bioplastic Film
- Harikrishnan, U. R.
- Structural and Vibration Analysis of a Telescopic Mast for Marine Radar Integration
- Haseena, P. V.
- Hazop and Hazid Analysis of Ammonia Barge Leaks
- Haseena, P. V.
- Adsorptive Removal and Optimization of Cu (II) Ions Using Bio-Derived Chitosan from Crustacean Shells: A Response Surface Methodology Approach
- Hemanandh, J.
- Shock Flow Behavior and Shock Management Over Supersonic Wedge Shapes with Enhance Surface Features: A Comprehensive Review
- Ishan, K. Mohammed
- Structural and Vibration Analysis of a Telescopic Mast for Marine Radar Integration
- James, Anugrah
- Immobilized Nitrogen-Doped TiOâ‚‚ Nanoparticles on Electrospun Polyacrylonitrile Fibres: Performance Evaluation in a Tubular Photocatalytic Reactor
- James, Nirmala Rachel
- Immobilized Nitrogen-Doped TiOâ‚‚ Nanoparticles on Electrospun Polyacrylonitrile Fibres: Performance Evaluation in a Tubular Photocatalytic Reactor
- Jayan, K. Jayesh
- Process intensification in chemical reactors: An overview in the heat exchanger perspective
- John, K. Geno
- Acoustic Analysis of Supersonic Jet Impingement on Flat and Grooved Plates Using a Double Parabolic Nozzle in an Anechoic Chamber
- John, Mathew
- Comparative Study on Mechanical and Metallurgical Characteristics of Friction Welded Joints from Al 6061 and Mg AZ31B by Varying Interface Geometries
- Jose, Abin C.
- Prototyping of Screw drive In-pipe Robot for straight and curved pipe
- Koshy, Mini
- Study of the feasibility of using ANN for modelling Seismic Response of RC structures
- Krishna, R. Kamal
- Processing and Characterization of Eichhornia Crassipes Fiber Reinforced Hybrid Polymer Composites
- Krishnan, Jibi
- Peer-Review Statements
- Kumar, P. Aneesh
- Pitting Corrosion Studies of Laser Beam Welded Hot and Cold Rolled Nb-Stabilized 5A Duplex Stainless Steel
- Lijo, V.
- Numerical Analysis of Geometrically Modified Ejector Refrigeration System
- Loganathan, M. K.
- Lithium-Ion Battery Safety: Hazards, Mechanisms, and Mitigation Strategies
- Madhusudhanan, Nithin C.
- Performance Evaluation of an Unconventional Orifice
- Mahath, C. S.
- Peer-Review Statements
- Makesh, P. M.
- Comparative Study on Mechanical and Metallurgical Characteristics of Friction Welded Joints from Al 6061 and Mg AZ31B by Varying Interface Geometries
- Makesh, P. M.
- Mechanical and Metallurgical Evaluation of Friction Welded Joints Formed with Rotating Al 6063 with Flat Interface and Al 6082 with Taper Interface
- Malavika, C. A.
- Study of the feasibility of using ANN for modelling Seismic Response of RC structures
- Maneesh, T.
- Lubricant base stock development from HDPE plastic pyrolysis oil and modified palm oil
- Manesh, K. K.
- Optimization based on visualization experiment for stir casting of Aluminium Hybrid Metal Matrix Composites
- Manesh, K. K.
- Comparative Tribological Studies of A356 Alloy and A356/5 Wt.% Sicp Composite at Low Parametric Conditions During Unidirectional and Reciprocating Contacts
- Manilal, A. M.
- Mapping Fault Tree Analysis to Artificial Neural Networks and Implementing in Google Colab
- Manilal, A. M.
- Development of a Water-Soluble Bioplastic Film
- Manoj, P. J.
- Numerical Analysis of Geometrically Modified Ejector Refrigeration System
- Mishra, Vibhor
- Lithium-Ion Battery Safety: Hazards, Mechanisms, and Mitigation Strategies
- Mohan, Adarsh S.
- Assessment of Safety Margin for HAZMAT Transportation
- Mohan, Santhakumar
- Adaptive sliding mode control with Gaussian process regression for trajectory tracking of remotely operated underwater vehicles
- Mubarak, A. K.
- Acoustic Analysis of Supersonic Jet Impingement on Flat and Grooved Plates Using a Double Parabolic Nozzle in an Anechoic Chamber
- Mukundan, Manoj Kumar
- Modelling human Tibio-Femoral cartilage response by FEA using simple alternative material models
- Nadirsha, Faheema
- Development of a Water-Soluble Bioplastic Film
- Naduthodi, Haris
- Structural and Vibration Analysis of a Telescopic Mast for Marine Radar Integration
- Naduthodi, Haris
- Performance Evaluation of an Unconventional Orifice
- Nageswaran, Gomathi
- Immobilized Nitrogen-Doped TiOâ‚‚ Nanoparticles on Electrospun Polyacrylonitrile Fibres: Performance Evaluation in a Tubular Photocatalytic Reactor
- Nair, Anjan R.
- Influence of Thixotropic Behavior on Extrusion-Based 3D Printing
- Nair, Anjan R.
- Metrological Evaluation of Surface Quality in Minimum Quantity Lubrication of AISI 52100 Steel During Turning Operations
- Nair, Praseetha P.
- Recent Advances in Ceramic-Based Microbial Fuel Cells: A Comprehensive Review on Technological Developments, Performance Metrics, and Emerging Applications
- Nair, Sujatha
- Attention-Enhanced Graph Neural Networks for Accurate Prediction of Elastic Properties in Crystalline Materials
- Nandakishore, V. B.
- Experimental Analysis of Corrosion and wear behavior of Mg 5.5 Zn Bio-implant alloy
- Nandana, K.
- Synthesis of Waste-Derived Nanocellulose and Its Integration with PBAT for Enhanced Performance in Sustainable Bioplastics
- Narayanan, Aswathi A.
- Modular Layout Design of Electric Catamaran Ferries for Inland Waterways Using Python
- Narayanan, Aswathi A.
- Structural and Vibration Analysis of a Telescopic Mast for Marine Radar Integration
- Narayanan, K. Neeraj
- Structural and Vibration Analysis of a Telescopic Mast for Marine Radar Integration
- Narayanan, Vineeth
- Comparative Study on Mechanical and Metallurgical Characteristics of Friction Welded Joints from Al 6061 and Mg AZ31B by Varying Interface Geometries
- Narayanan, Vineeth
- Mechanical and Metallurgical Evaluation of Friction Welded Joints Formed with Rotating Al 6063 with Flat Interface and Al 6082 with Taper Interface
- Nelson, Nevin
- Influence of Thixotropic Behavior on Extrusion-Based 3D Printing
- Nelson, Nevin
- Metrological Evaluation of Surface Quality in Minimum Quantity Lubrication of AISI 52100 Steel During Turning Operations
- Nishad, S.
- Development of a D-Limonene based Binder for Sulfur Cathodes in Lithium-Sulfur Battery
- Padmavathy, K. S.
- Hazop and Hazid Analysis of Ammonia Barge Leaks
- Padmavathy, K. S.
- Adsorptive Removal and Optimization of Cu (II) Ions Using Bio-Derived Chitosan from Crustacean Shells: A Response Surface Methodology Approach
- Parvathy, B.
- Development of a D-Limonene based Binder for Sulfur Cathodes in Lithium-Sulfur Battery
- Philip, Mercy Anna
- Barrier Definition and Management of Ammonia Storage Facility
- Philip, Mercy Anna
- Synthesis of Waste-Derived Nanocellulose and Its Integration with PBAT for Enhanced Performance in Sustainable Bioplastics
- Poulose, Subin
- Sensor-Integrated Automation for Maturity Detection in Ayurvedic Product Manufacturing Using Temperature and RGB Image Analysis
- Praveen, P.
- Experimental Analysis of Corrosion and wear behavior of Mg 5.5 Zn Bio-implant alloy
- Radhakrishnan, Remya
- AI-Enabled PPE Surveillance System to Enhance Safety Standards in Shipyards
- Raj, V. Prajeesh
- Pitting Corrosion Studies of Laser Beam Welded Hot and Cold Rolled Nb-Stabilized 5A Duplex Stainless Steel
- Rajan, Anju
- Janus MoWC MXene for Efficient Nitrogen Reduction: A DFT Study
- Rajan, P. Lakshmi
- Attention-Enhanced Graph Neural Networks for Accurate Prediction of Elastic Properties in Crystalline Materials