Proceedings of the International Conference on Advanced Design, Manufacturing, and Sustainable Energy Systems (ICADMSES 2026)
International Conference on Advanced Design, Manufacturing, and Sustainable Energy Systems (ICADMSES 2026)
📍Gorakhpur, India🗓️ 12-13 March 2026
277 authors
- Abhilash, O.
- Influence of Piston Coating and B25 Biodiesel on the Operational Characteristics of a CI DI Engine
- Abhinav, Kumar
- Advancing I4.0 in India’s Capital Goods Sector: Impact Assessment and a Case Study
- Adhatrao, Ketaki
- Ergonomic Analysis of Engineering College Teachers for Computer Work: A Case Study
- Adhikari, Sandeep
- Current Scenario of Indian Sustainable Mobility Initiation, Adoption of EVs, Focusing on the CO₂ Emission Mitigation and Infrastructure Development
- Agarawal, Hirday
- Emerging Materials and Methods in 3D Printing: A Review of Innovations, Challenges, and Biomedical Applications
- Agarwal, Deepak
- Simulation-Driven Optimization for Dynamic Production Planning in Cyber-Physical Smart Factories
- Agrahari, Kajal
- AI-Driven Carbon Capture Sequestration Technologies (CCST): Advancements, Limitations and Pathways for a Sustainable Future
- Agre, Saurabh
- Electric Vehicle Battery Thermal Management Systems: Practical Perspectives
- Ahirwar, Mukesh Kumar
- Analysis of Air Pollution Mitigation Using Plant-Based Filters: Comparative Evaluation of Blocking, Parallel, and Zigzag Panel Arrangements
- Ahmad, Salman Khursheed
- Comparative Study on Mechanical Properties in Single and Dual-Material FDM 3D-Printed Specimens
- Alamelu, J. V.
- Multi-Criteria Decision Making Approaches for Identification of Drivers for Sustainability and Ranking of Automotive Organizations
- Alhawat, Vishal
- Enhancing Tribological Behavior of Magnesium Composites by Reinforcing Solid Lubricants for Automobile Sliding Applications: A Review
- Amin, Yash
- AI-Driven Assessment of Conceptual Understanding in Mechanical Engineering Mechanics
- Amin, Yash
- Low-Cost, Open-Source Indoor Localization for IoT: A BLE-Based System
- Anamika, A.
- Fuel Treatment in Enhancing Engine Performance: A Review
- Anand, Abhimanyu
- Comparative Study on Mechanical Properties in Single and Dual-Material FDM 3D-Printed Specimens
- Anand, Arjun
- Integrating Spatial Analytics for Human-Centric Architectural Design Optimization
- Anand, Arjun
- Compact and Streamlined Transmission of 3D Urban Models: An Enhanced Approach
- Anand, Utkarsh
- Human Centered Biomechanics Driven Design of Wearable Robotic Assist Devices Using Additive Manufacturing
- Ananya, J.
- Multi-Criteria Decision Making Approaches for Identification of Drivers for Sustainability and Ranking of Automotive Organizations
- Ansari, M. Yusuf
- An Analysis of the Energy and Exergy of a Trigeneration System That Uses Solar Energy to Make Electricity, Hydrogen, and Cooling
- Anupdev, K. M.
- Mode I Delamination Study of 3D Printed Onyx Material
- Arora, Rajeev
- Conducting Polymer Polyaniline, TiO2, and PVA Nanocomposite Film Performance in DC Conductivity
- Arya, Harish Kumar
- Effect of Tool Tilt Angle on Metallurgical and Mechanical Properties of Friction Stir Welded AA6063-T6 Aluminium Alloy
- Aziz, Syed Rummaan
- ROS-Based Autonomous Navigation of an Ackermann Steer Robot Using LiDAR
- Baghel, Neelam
- AI-Driven Carbon Capture Sequestration Technologies (CCST): Advancements, Limitations and Pathways for a Sustainable Future
- Baghel, Neelam
- Impact of Comfort-Oriented Technological Development on Environmental Sustainability: A Review of Technology-Induced Delays
- Bahuguna, Anurag
- Current Scenario of Indian Sustainable Mobility Initiation, Adoption of EVs, Focusing on the CO₂ Emission Mitigation and Infrastructure Development
- Bain, Sachin Kumar
- Recent Advances in Aluminum Foam Sandwich Structures: Foaming Agents, Processing, and Applications
- Bartaria, V. N.
- Analysis of Air Pollution Mitigation Using Plant-Based Filters: Comparative Evaluation of Blocking, Parallel, and Zigzag Panel Arrangements
- Barua, Aryaman
- Impact of Comfort-Oriented Technological Development on Environmental Sustainability: A Review of Technology-Induced Delays
- Basavaraja, J. Sharana
- Mode I Delamination Study of 3D Printed Onyx Material
- Basavaraja, J. Sharana
- Experimental and Finite Element Analysis of Fatigue Crack Growth in Cu–Ni Alloy
- Bawankar, Sapna
- AI Guided Design for Additive Manufacturing for Lightweight Automotive Brackets
- Behera, Laxmidhar
- Design and Learning-Based Control of an Autonomous Aerial Robot for Safe Physical Interaction with the Environment
- Bharadwaj, Ujjwal
- Experimental Investigation of Mechanical Properties of Fiber Reinforced Concrete Using Recycled Fiber
- Chandana, B. C.
- Multi-Criteria Decision Making Approaches for Identification of Drivers for Sustainability and Ranking of Automotive Organizations
- Chandra, A. R. Anil
- Mode I Delamination Study of 3D Printed Onyx Material
- Chandra, A. R. Anil
- Experimental and Finite Element Analysis of Fatigue Crack Growth in Cu–Ni Alloy
- Chaturvedi, Vijit
- Experimental Investigation of Mechanical Properties of Fiber Reinforced Concrete Using Recycled Fiber
- Chauhan, Varun Singh
- Role of Image Processing Techniques for Extracting Features in NDE Weld Images
- Chaurasiya, Deep Chandra
- A Parametric Bézier and B-Spline Surface Fitting Approach for Reverse Engineering
- Chavhan, Rahul
- Experimental study of NPK Compound Fertilizers in Hydrophobic Fertilizers using UV Spectroscopy and Light Absorption Technique
- Chowdhury, Shubhashit
- Sustainable Precision Machining of Nimonic 90 Alloy with Biodegradable B₄C-Enriched Dielectric in Micro-EDM
- Dahiya, Gagan
- Smart Trash Collection Boat
- Dake, Vishal
- Simulation-Based Performance Assessment of a Grid Connected Rooftop Photovoltaic System in a Coastal Urban Environment
- Das, Kishor Kumar
- A Multi-UART Ultrasonic Sensor Controller for Real-Time Parallel Distance Measurement and Data Aggregation in Underwater Robotic Applications
- Das, Kishor Kumar
- Hierarchical Multi-Scale Modelling of ROV-Mounted Rolling Brush Systems: From Filament Micro-Dynamics to Full Vehicle Integration
- Das, Kishor Kumar
- A Modular Underwater Simulation Framework for Ship Hull Inspection
- Dewang, Yogesh
- Application of Machine Learning for Prediction of Springback in S-Rail Sheet Metal Forming
- Dhar, Narendra Kumar
- Design and Learning-Based Control of an Autonomous Aerial Robot for Safe Physical Interaction with the Environment
- Dixit, Prakhar
- Synthesis of Extract from Waste Banana Peels, Coating of the Extract on Copper by Drop Casting, and Examination of Corrosion Behavior of Coated Copper Substrates in Saline Water
- Dixit, Pranjal
- Synthesis of Extract from Waste Banana Peels, Coating of the Extract on Copper by Drop Casting, and Examination of Corrosion Behavior of Coated Copper Substrates in Saline Water
- Dogra, Vikas
- Advancing I4.0 in India’s Capital Goods Sector: Impact Assessment and a Case Study
- Dubey, R. K.
- Standardization of Light Intensities for Different Indoor Ornamental Plant Species in an Indoor Vertical Garden
- Dubey, Sonam
- Smart Grid Aware Digital Manufacturing Strategy for Low Carbon Production Using Microgrids and Energy Storage
- Duggal, Prakhar
- Experimental Investigation of Mechanical Properties of Fiber Reinforced Concrete Using Recycled Fiber
- Dwivedi, Anand Mohan
- Simulation-Driven Optimization for Dynamic Production Planning in Cyber-Physical Smart Factories
- Dwivedi, Vijay Kumar
- Experimental Investigation of Mechanical Properties of Fiber Reinforced Concrete Using Recycled Fiber
- Gautam, Bharti
- Standardization of Light Intensities for Different Indoor Ornamental Plant Species in an Indoor Vertical Garden
- Goswami, Anjali
- Digital Twin Enabled Product Lifecycle Management for Smart and Sustainable Factories
- Goyal, Khushdeep
- Advanced Materials and Thermal Spray Techniques for Improving Wear and Corrosion Resistance in Boiler Systems
- Goyal, Khushdeep
- Nanocomposite Hybrid Coatings for Hot Corrosion Resistance: Mechanisms, Materials, and Experimental Insights
- Gupta, Kritesh Kumar
- Explainable Band Gap Prediction in ABX₃ Perovskites Using Composition-Based Features
- Gupta, Kritesh Kumar
- A Variational Autoencoder Framework for the Inverse Design of High-Temperature Alloys
- Gupta, Pallav
- Peer-Review Statements
- Gupta, Pankaj Kumar
- Density and Void Content Characterization of Stir-Cast Al 6061-Marble Dust Reinforced Metal Matrix Composites
- Gupta, Sandeep
- Design and Learning-Based Control of an Autonomous Aerial Robot for Safe Physical Interaction with the Environment
- Gupta, Shashi Bhushan
- Fuel Treatment in Enhancing Engine Performance: A Review
- Hajare, Dipak M.
- Standoff Distance Driven Control of Elementary Performance in Thin Wall Steel Structures Fabricated by CMT-WAAM
- Hemadri, Vinayak B.
- Performance Comparison of R1234yf and R134a in a Heat Pump: A Simulation-Based Assessment Using Aspen Plus
- Hemadri, Vinayak B.
- Influence of Piston Coating and B25 Biodiesel on the Operational Characteristics of a CI DI Engine
- Hosure, Ravishankar
- Ergonomic Analysis of Engineering College Teachers for Computer Work: A Case Study
- Jaiswal, Deepti
- Effect of Tool Tilt Angle on Metallurgical and Mechanical Properties of Friction Stir Welded AA6063-T6 Aluminium Alloy
- Jaiswal, Deepti
- Dimensional Analysis Model For Estimating Cooling Time ( Δ t 5 - 1 ) $${(\Delta \mathbf{t}}_{5-1})$$ in Friction Stir-Welded Aluminium Alloys
- Jamwal, Nindia
- Standardization of Light Intensities for Different Indoor Ornamental Plant Species in an Indoor Vertical Garden
- Jangale, Yogesh
- Ergonomic Analysis of Engineering College Teachers for Computer Work: A Case Study
- Jatti, Vijaykumar S.
- An Experimental Investigation on Transverse Tensile Response of Unidirectional Carbon Fiber Composites
- Javed, Arif
- Emerging Materials and Methods in 3D Printing: A Review of Innovations, Challenges, and Biomedical Applications
- Jha, Shailesh Kumar
- Investigation of Solar Desalination System with Aluminium Basin
- Ji, Gopal
- Synthesis of Extract from Waste Banana Peels, Coating of the Extract on Copper by Drop Casting, and Examination of Corrosion Behavior of Coated Copper Substrates in Saline Water
- Kadiyam, Jagadeesh
- A Multi-UART Ultrasonic Sensor Controller for Real-Time Parallel Distance Measurement and Data Aggregation in Underwater Robotic Applications
- Kadiyam, Jagadeesh
- Modeling and Control for Underwater Vehicle Manipulator System with Simscape Multibody
- Kadiyam, Jagadeesh
- Hierarchical Multi-Scale Modelling of ROV-Mounted Rolling Brush Systems: From Filament Micro-Dynamics to Full Vehicle Integration
- Kadiyam, Jagadeesh
- A Modular Underwater Simulation Framework for Ship Hull Inspection
- Kala, Himanshu
- Emerging Materials and Methods in 3D Printing: A Review of Innovations, Challenges, and Biomedical Applications
- Kamal, M. Faieq Rashid
- An Analysis of the Energy and Exergy of a Trigeneration System That Uses Solar Energy to Make Electricity, Hydrogen, and Cooling
- Kanwar, Khamma
- A Novel Algorithmic Framework for Precise PV Curve Reconstruction and Global MPP Detection Under Non-Uniform Irradiance
- Kaushik, Lav
- Evaluation of Thermal Performance of Solar Air Heater Having Rotating Baffles and Thermal Energy Storage
- Khalid, Faizan
- An Analysis of the Energy and Exergy of a Trigeneration System That Uses Solar Energy to Make Electricity, Hydrogen, and Cooling
- Khan, Amir
- A Review on Various Types of Dental Composites: Metal, Ceramic, Resin Based and its Mechanical Properties
- Khan, Roohee
- Lean Green and Circular Design Framework for Additively Manufactured Components in Renewable Energy Systems
- Khan, Sahil
- Comparative Study on Mechanical Properties in Single and Dual-Material FDM 3D-Printed Specimens
- Khan, Saleem Anwar
- ROS-Based Autonomous Navigation of an Ackermann Steer Robot Using LiDAR
- Khatkar, Sandeep Kumar
- Enhancing Tribological Behavior of Magnesium Composites by Reinforcing Solid Lubricants for Automobile Sliding Applications: A Review
- Khimsuriya, Yogeshkumar
- Evaluation of Thermal Performance of Solar Air Heater Having Rotating Baffles and Thermal Energy Storage
- Kinhekar, Nandkishor
- Experimental study of NPK Compound Fertilizers in Hydrophobic Fertilizers using UV Spectroscopy and Light Absorption Technique
- Kinhekar, Nandkishor
- Simulation-Based Performance Assessment of a Grid Connected Rooftop Photovoltaic System in a Coastal Urban Environment
- Kondhalkar, Prashant K.
- Standoff Distance Driven Control of Elementary Performance in Thin Wall Steel Structures Fabricated by CMT-WAAM
- Kumar, Aman
- Solar-Powered Heavy-Duty Multipurpose Farming Equipment for Efficient, Sustainable Agricultural Operations